V3r unlocking via TP?? - GSM-Forum

alexiej · 10-13-2006, 14:06

Hi!!

I've read many posts in this forum and at the moment i'm really confused because i've found different infos. I'm sure that i have V3r boot loader A0.30 so i need to make test point. But i'm not sure that do i have to have any other hardware?? basically i understand this procedure as following: make testpoint(connect tp to the ground with a wire) then unlock with a software using usb cable. is that correct or do i need any other hardware??

thnx for any answers

coolmax · 10-13-2006, 14:23

Quote:

Originally Posted by alexiej

Hi!!

I've read many posts in this forum and at the moment i'm really confused because i've found different infos. I'm sure that i have V3r boot loader A0.30 so i need to make test point. But i'm not sure that do i have to have any other hardware?? basically i understand this procedure as following: make testpoint(connect tp to the ground with a wire) then unlock with a software using usb cable. is that correct or do i need any other hardware??

thnx for any answers

u make it sound so simple..best to use smartclip or victor to unlck yr v3r
here is a picture that may help u.best of luck

coolmax · 10-13-2006, 14:27

Quote:

Originally Posted by alexiej

Hi!!

I've read many posts in this forum and at the moment i'm really confused because i've found different infos. I'm sure that i have V3r boot loader A0.30 so i need to make test point. But i'm not sure that do i have to have any other hardware?? basically i understand this procedure as following: make testpoint(connect tp to the ground with a wire) then unlock with a software using usb cable. is that correct or do i need any other hardware??

thnx for any answers

u need to use smartclip or victor to unlock that handset..here is a picture that will help u.
best of luck

alexiej · 10-13-2006, 14:41

ok thanx for your answer. if there is any hardware needed than it's not affordable to buy a smart clip or any other hardware just to unlock one phone. I've also heard that there are subsidy codes for that phones but i can't find any of these. As simple as it is my phone is useless;/

toptech · 10-13-2006, 15:29

try to use usb smart cracked version 3.9 it should work.i have used it before

bauzito · 10-13-2006, 17:21

In this model I don´t think you can.
You will get closer to kill it than to unlock it....

coolmax · 10-14-2006, 12:00

Quote:

Originally Posted by toptech

try to use usb smart cracked version 3.9 it should work.i have used it before

i dont understand why persons "BIG UP" cracks and clones..a recipe for disaster.spend some money and buy the real deal save yourself hassle in the long term. CRACKS AND CLONES=DEAD FONES

almozaffar · 10-14-2006, 23:38

"CRACKS AND CLONES=DEAD FONES"

I like that, esp. if you will be working with ppl fones.

TIA

Mobilusis · 10-14-2006, 23:43

Quote:

Originally Posted by alexiej

ok thanx for your answer. if there is any hardware needed than it's not affordable to buy a smart clip or any other hardware just to unlock one phone. I've also heard that there are subsidy codes for that phones but i can't find any of these. As simple as it is my phone is useless;/

You should better bring this phone to someone who has proper equipment than kill it yourself with some cracked software

obetjohn · 10-15-2006, 10:53

hi!
neEd help unlocking tmobile v3r bootloader 0A.52. SW R3443U2_G_0E.C0.13R

THNX!

coolmax · 10-15-2006, 11:56

Quote:

Originally Posted by almozaffar

"CRACKS AND CLONES=DEAD FONES"

I like that, esp. if you will be working with ppl fones.

TIA

u like that bro?...i think it was pure genuis

thanks

stoyka · 10-15-2006, 14:47

At last I have unlocked my two V3x,one orange one vodafone.Use p2k easy tool v3.9 cracked (search google) Strip the phone and locate test point.Start p2k easy tool,go to unlock ,select v3x,check unlock,check test point.Now connect phone usb cable,connect test point to ground and insert battery.(Bit tricky) Your computer will have detected new hardware.It should say something blank if not repeat testpoint procedure.Then disconnect test point.Let it install new hardware and when finished click on "do selected jobs " it will say disconnect testpoint click onthis and your phone is unlocked in seconds.This also works for v3r.

badwily · 10-18-2006, 21:26

Quote:

Originally Posted by stoyka

At last I have unlocked my two V3x,one orange one vodafone.Use p2k easy tool v3.9 cracked (search google) Strip the phone and locate test point.Start p2k easy tool,go to unlock ,select v3x,check unlock,check test point.Now connect phone usb cable,connect test point to ground and insert battery.(Bit tricky) Your computer will have detected new hardware.It should say something blank if not repeat testpoint procedure.Then disconnect test point.Let it install new hardware and when finished click on "do selected jobs " it will say disconnect testpoint click onthis and your phone is unlocked in seconds.This also works for v3r.

Also it's important that u have disconnect LCD from the phone board ....because u can damage it, with TP

stoyka · 10-18-2006, 23:38

I always use USB smart 3.9 cracked now I have unlocked 10 v3r,s or v3x,s no problem you just need a steady hand and take care.Not killed a phone yet.

alexiej · 10-24-2006, 18:10

Quote:

Originally Posted by stoyka

I always use USB smart 3.9 cracked now I have unlocked 10 v3r,s or v3x,s no problem you just need a steady hand and take care.Not killed a phone yet.

USB Smart 3.9 is a hardware or software?? p2k tools is also v 3.9 and i'm not sure... if I use p2k tools cracked the way you described it do I have to use any hardware to connect the phone to pc or just simple usb cable??

10-13-2006, 14:06	#1 (permalink)
alexiej Junior Member Join Date: Oct 2006 Posts: 3 Member: 369808 Status: Offline Thanks Meter: 0	V3r unlocking via TP?? Hi!! I've read many posts in this forum and at the moment i'm really confused because i've found different infos. I'm sure that i have V3r boot loader A0.30 so i need to make test point. But i'm not sure that do i have to have any other hardware?? basically i understand this procedure as following: make testpoint(connect tp to the ground with a wire) then unlock with a software using usb cable. is that correct or do i need any other hardware?? thnx for any answers

10-13-2006, 15:29	#5 (permalink)
toptech No Life Poster Join Date: Apr 2005 Location: mars Posts: 1,096 Member: 132881 Status: Offline Thanks Meter: 105	v3r unlocking try to use usb smart cracked version 3.9 it should work.i have used it before

10-15-2006, 10:53	#10 (permalink)
obetjohn Junior Member Join Date: Oct 2006 Posts: 5 Member: 366122 Status: Offline Thanks Meter: 0	tmobile v3r... hi! neEd help unlocking tmobile v3r bootloader 0A.52. SW R3443U2_G_0E.C0.13R THNX!

10-15-2006, 14:47	#12 (permalink)
stoyka Junior Member Join Date: May 2006 Posts: 15 Member: 275203 Status: Offline Thanks Meter: 0	V3X unlock using P2K EASY TOOL V39 CRACKED At last I have unlocked my two V3x,one orange one vodafone.Use p2k easy tool v3.9 cracked (search google) Strip the phone and locate test point.Start p2k easy tool,go to unlock ,select v3x,check unlock,check test point.Now connect phone usb cable,connect test point to ground and insert battery.(Bit tricky) Your computer will have detected new hardware.It should say something blank if not repeat testpoint procedure.Then disconnect test point.Let it install new hardware and when finished click on "do selected jobs " it will say disconnect testpoint click onthis and your phone is unlocked in seconds.This also works for v3r.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
v3r unlock via ubl and via tp good mr manole.	kikikokoki	Ultima Box Light	0	04-08-2009 07:40
v3r unlock via ubl via tp unlock	kikikokoki	Ultima Box Light	1	03-15-2009 23:00
v3r unlock via ubl	kikikokoki	Ultima Box Light	0	02-25-2009 04:45
V3r unlock without tp with gotmoto?	marlenemr	GOT Motorola	0	06-28-2008 20:50
v3r at&t unlocked via TP with smartmoto[reference]	alfox	Smart-Clip	0	02-15-2008 09:24

10-13-2006, 14:41	#4 (permalink)
alexiej Junior Member Join Date: Oct 2006 Posts: 3 Member: 369808 Status: Offline Thanks Meter: 0	ok thanx for your answer. if there is any hardware needed than it's not affordable to buy a smart clip or any other hardware just to unlock one phone. I've also heard that there are subsidy codes for that phones but i can't find any of these. As simple as it is my phone is useless;/

10-13-2006, 17:21	#6 (permalink)
bauzito No Life Poster Join Date: Feb 2005 Location: Near the sea... Portugal Age: 48 Posts: 1,374 Member: 120120 Status: Offline Sonork: 100.1592092 Thanks Meter: 234	In this model I don´t think you can. You will get closer to kill it than to unlock it....

10-14-2006, 23:38	#8 (permalink)
almozaffar Insane Poster Join Date: Jun 2005 Age: 57 Posts: 82 Member: 152884 Status: Offline Thanks Meter: 1	"CRACKS AND CLONES=DEAD FONES" I like that, esp. if you will be working with ppl fones. TIA

10-18-2006, 23:38	#14 (permalink)
stoyka Junior Member Join Date: May 2006 Posts: 15 Member: 275203 Status: Offline Thanks Meter: 0	I always use USB smart 3.9 cracked now I have unlocked 10 v3r,s or v3x,s no problem you just need a steady hand and take care.Not killed a phone yet.