v500, powers on, but no screen - GSM-Forum

.:GSM International:. · 11-12-2004, 12:23

hi guys

I recently repaired a v525 using advice and that that i got from this forum, so im needing you guys help again

I got this v500 and when u powered it on it just went white screen, no sound, nothing, it did that for a while then powered itself off, i flashed it using pst and fone recovered, but now black screen, and sound, still no display.

I used the mateox flash and mss, but it didnt repair the fone, and now i am stuck.

Has anyone got a working repair file for v500 on orange uk network for either mss or pst that will 10000000% repair this fone?

Thanx in advance for all your help

Jay

Invisible · 11-12-2004, 12:30

hi,

read calibration from other v500 (working) and write to your,
image will came back

best regards
Invisible

.:GSM International:. · 11-12-2004, 12:37

where do i read calibration from mate, wot soft do i use? could you explain this in a little more detail please?

regards

jay

11-12-2004, 23:28

Just use version xxx_xx_55R flash file.

.:GSM International:. · 11-15-2004, 10:36

@ legija, and where to get said flash my friend?

Regrds

Jay

11-15-2004, 11:42

Hehehe

Same place as siemens flash files -

)))

Droopy75 · 11-24-2004, 00:28

I have this issue with a V300. What file do I need to do, and how??

eddi® · 11-24-2004, 10:47

reflash u v500 with PST and relash file>>>>>reflash file v5xx

ihsanali · 12-22-2004, 10:22

i also have one v300 what about that

lucynka01 · 03-24-2006, 14:54

hello i have the same problem with my v500 after contact with water, when powered on i can see only white screen sounds and small screen working good and even log to the network but still white screen, anyone can help??

lucynka01 · 03-24-2006, 16:31

i flashed it but still the same....maybe some resistor is dead or something, but i don't now which?

11-12-2004, 12:23	#1 (permalink)
.:GSM International:. Cheater -Don't Deal with him- Join Date: Jan 2002 Age: 48 Posts: 4,783 Member: 8879 Status: Offline Sonork: 100.84016 Thanks Meter: 327	v500, powers on, but no screen hi guys I recently repaired a v525 using advice and that that i got from this forum, so im needing you guys help again I got this v500 and when u powered it on it just went white screen, no sound, nothing, it did that for a while then powered itself off, i flashed it using pst and fone recovered, but now black screen, and sound, still no display. I used the mateox flash and mss, but it didnt repair the fone, and now i am stuck. Has anyone got a working repair file for v500 on orange uk network for either mss or pst that will 10000000% repair this fone? Thanx in advance for all your help Jay

11-15-2004, 11:42	#6 (permalink)
legija Guest Posts: n/a Member:	Hehehe Same place as siemens flash files -)))

11-24-2004, 00:28	#7 (permalink)
Droopy75 Junior Member Join Date: Nov 2004 Posts: 13 Member: 90458 Status: Offline Thanks Meter: 0	What about V300 I have this issue with a V300. What file do I need to do, and how??

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
W580 Power on but blank screen	bluehawk20	Sony Ericsson Hardware Repair	16	10-11-2011 07:31
3230 powers on but blank screen	smartfone	Nokia Hardware & Hardware Repair	36	12-22-2008 08:20
N70 power on but white screen	parand	Nokia Hardware & Hardware Repair	4	06-10-2008 09:06
1208 power on but blue screen	..:::Gsm india:::..	Nokia Hardware & Hardware Repair	4	03-20-2008 07:18
3220 no power on, but the power button is good	real1ed	Nokia Hardware & Hardware Repair	8	03-20-2006 18:29

11-12-2004, 12:30	#2 (permalink)
Invisible No Life Poster Join Date: Apr 2001 Location: รำมว&# Posts: 2,461 Member: 3956 Status: Offline Sonork: galletto3 rules :D Thanks Meter: 55	hi, read calibration from other v500 (working) and write to your, image will came back best regards Invisible

11-12-2004, 12:37	#3 (permalink)
.:GSM International:. Cheater -Don't Deal with him- Join Date: Jan 2002 Age: 48 Posts: 4,783 Member: 8879 Status: Offline Sonork: 100.84016 Thanks Meter: 327	where do i read calibration from mate, wot soft do i use? could you explain this in a little more detail please? regards jay

11-12-2004, 23:28	#4 (permalink)
legija Guest Posts: n/a Member:	Just use version xxx_xx_55R flash file.

11-15-2004, 10:36	#5 (permalink)
.:GSM International:. Cheater -Don't Deal with him- Join Date: Jan 2002 Age: 48 Posts: 4,783 Member: 8879 Status: Offline Sonork: 100.84016 Thanks Meter: 327	@ legija, and where to get said flash my friend? Regrds Jay

11-24-2004, 10:47	#8 (permalink)
eddi® No Life Poster Join Date: Apr 2002 Location: Germany Age: 52 Posts: 768 Member: 10776 Status: Offline Thanks Meter: 240	reflash u v500 with PST and relash file>>>>>reflash file v5xx

12-22-2004, 10:22	#9 (permalink)
ihsanali No Life Poster Join Date: Mar 2003 Location: pakistan Age: 45 Posts: 717 Member: 23939 Status: Offline Thanks Meter: 14	i also have one v300 what about that

03-24-2006, 14:54	#10 (permalink)
lucynka01 Junior Member Join Date: Feb 2006 Posts: 6 Member: 234473 Status: Offline Thanks Meter: 1	hello i have the same problem with my v500 after contact with water, when powered on i can see only white screen sounds and small screen working good and even log to the network but still white screen, anyone can help??

03-24-2006, 16:31	#11 (permalink)
lucynka01 Junior Member Join Date: Feb 2006 Posts: 6 Member: 234473 Status: Offline Thanks Meter: 1	i flashed it but still the same....maybe some resistor is dead or something, but i don't now which?