v975 error: 0x1DE - GSM-Forum

sallu · 04-03-2007, 17:06

TRIED TO UNLOCK WITH USB SMART(S/W HANGED) BUT ABOVE ERROR ON THE DISPLAY NOW.

TRIED TO REPAIR PDS BUT MSG PHONE CONNECTED AND NOTHING HAPPENS
TRIED TO REPAIR BOOTLOADER BUT FOLOWING ERROR (bootloader ver is 6.3.1)

Connecting to phone ...
Connected to: 'Motorola Flash'
Connected OK
Bootloader version: 0310
Sending loader to phone ...
ERROR: FLASHCMD read error
ERROR: Sending ADDR command.
ERROR: Send loader failed (1)

Any suggesion to repair this phone with usb smart???
If flash files are required plz upload. v.Thanks in advance.

boria · 04-03-2007, 18:13

if You`re using p2k easy change model to V980 Micron, if You have smart clip (clone or original) use remove RSA.

sallu · 04-04-2007, 05:48

Quote:

Originally Posted by boria

if You`re using p2k easy change model to V980 Micron, if You have smart clip (clone or original) use remove RSA.

I m using p2k easy tool but boot loader can not be written. Following error occures.
Connecting to phone ...
Connected to: 'Motorola Flash'
Connected OK
Bootloader version: 0310
Sending loader to phone ...
Sending second loader to phone ...
ERROR: Sending second loader (3)
ERROR: Send second loader failed

Plz help me

tuhingr · 04-04-2007, 06:12

Maybe U can repair PDS
I was done with Smart Clip
http://forum.gsmhosting.com/vbb/showthread.php?t=390152

sallu · 04-04-2007, 07:07

Need solution with p2k easy tool.

boria · 04-04-2007, 09:54

as I told You before just change model of your handset in P2K_Easy_Tool_v39 to V980 Micron or V980 Intel, for me works fine with every v975, E1000 and c975 with 0x1DE error.

sallu · 04-04-2007, 17:11

Quote:

Originally Posted by boria

as I told You before just change model of your handset in P2K_Easy_Tool_v39 to V980 Micron or V980 Intel, for me works fine with every v975, E1000 and c975 with 0x1DE error.

Wt to do aftet selecting this model. still same error
ERROR: Sending second loader (3)
ERROR: Send second loader failed

beo_tech · 04-05-2007, 17:16

Quote:

Originally Posted by boria

as I told You before just change model of your handset in P2K_Easy_Tool_v39 to V980 Micron or V980 Intel, for me works fine with every v975, E1000 and c975 with 0x1DE error.

good work brother
works well with me
thank you a lot........

**tkowsar** · 04-06-2007, 09:25

use RSD Lite 3.5 and just full flash ur phone with hex file.

solv and enjoy

sihnam · 04-06-2007, 12:20

Quote:

Originally Posted by sallu

Need solution with p2k easy tool.

try to flash with flash backup 3 (FB3) same firmware as original, select active phone profile V980/ write data tab/ select flash file/ write data

MDK23 · 04-06-2007, 13:25

my bro use UBL is Good

**tkowsar** · 04-24-2007, 15:02

i already dead 2 phone (e100,c975) when i try to unlock with usb smart

any one dont try to unlock phone with usb smart ur phone must be dead 100% usb smart kill it.

because when we try to unlock to phone with usb smart it going to phone blank (erase flash and bootlodder) so a blank phone not flashed with usb smart need smart moto or ultima box

usb smart just for flashing

and you dont solv ur problem with usb smart

that is all history of moto and usb smart.

dotade06 · 04-25-2007, 16:41

Using P2k v.3.9, connect select the phone model select unlock without TP. As soon as the first loader is sent, when it ask you to power it on in flash mode remove it. It will power on.

Satyam321 · 05-06-2007, 14:56

Quote:

Originally Posted by boria

as I told You before just change model of your handset in P2K_Easy_Tool_v39 to V980 Micron or V980 Intel, for me works fine with every v975, E1000 and c975 with 0x1DE error.

thanks for your support

tested and work 100% for v975

regards,

hamada clever · 05-06-2007, 15:14

good work brother
works well with me
thank you a lot........

04-03-2007, 17:06	#1 (permalink)
sallu No Life Poster Join Date: Jul 2004 Age: 46 Posts: 549 Member: 73797 Status: Offline Thanks Meter: 19	v975 error: 0x1DE TRIED TO UNLOCK WITH USB SMART(S/W HANGED) BUT ABOVE ERROR ON THE DISPLAY NOW. TRIED TO REPAIR PDS BUT MSG PHONE CONNECTED AND NOTHING HAPPENS TRIED TO REPAIR BOOTLOADER BUT FOLOWING ERROR (bootloader ver is 6.3.1) Connecting to phone ... Connected to: 'Motorola Flash' Connected OK Bootloader version: 0310 Sending loader to phone ... ERROR: FLASHCMD read error ERROR: Sending ADDR command. ERROR: Send loader failed (1) Any suggesion to repair this phone with usb smart??? If flash files are required plz upload. v.Thanks in advance.

04-06-2007, 09:25	#9 (permalink)
tkowsar Moderator Join Date: Feb 2006 Location: Bangladesh & Bahrain Posts: 3,165 Member: 233205 Status: Offline Thanks Meter: 5,014	use RSD use RSD Lite 3.5 and just full flash ur phone with hex file. solv and enjoy

04-24-2007, 15:02	#12 (permalink)
tkowsar Moderator Join Date: Feb 2006 Location: Bangladesh & Bahrain Posts: 3,165 Member: 233205 Status: Offline Thanks Meter: 5,014	you not solv prob with usb smart i already dead 2 phone (e100,c975) when i try to unlock with usb smart any one dont try to unlock phone with usb smart ur phone must be dead 100% usb smart kill it. because when we try to unlock to phone with usb smart it going to phone blank (erase flash and bootlodder) so a blank phone not flashed with usb smart need smart moto or ultima box usb smart just for flashing and you dont solv ur problem with usb smart that is all history of moto and usb smart.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
urgent need help v975 0x1DE....	harim_1981	Ultima Box Light	7	05-19-2007 11:11
ubl works for v975 0x1DE	keaelite	Ultima Box Light	2	01-22-2007 03:58
Error 0x1DE in V975 and now ? HELP PLEASE	riorocker2006	Motorola P2k	2	07-16-2006 15:54
V975 now have this error 0x1de	mfreaks	Motorola P2k	1	09-23-2005 04:43
V975 If you have 0x1dE error	Nokall	Smart-Clip	1	06-10-2005 19:49

04-03-2007, 18:13	#2 (permalink)
boria Freak Poster Join Date: Oct 2003 Location: Poland, Gliwice Age: 43 Posts: 131 Member: 41307 Status: Offline Thanks Meter: 2	if You`re using p2k easy change model to V980 Micron, if You have smart clip (clone or original) use remove RSA.

04-04-2007, 06:12	#4 (permalink)
tuhingr No Life Poster Join Date: Jun 2005 Location: Chittagong, Bangladesh. Posts: 1,113 Member: 152752 Status: Offline Sonork: 100.1581661 Thanks Meter: 182	Maybe U can repair PDS I was done with Smart Clip http://forum.gsmhosting.com/vbb/showthread.php?t=390152

04-04-2007, 07:07	#5 (permalink)
sallu No Life Poster Join Date: Jul 2004 Age: 46 Posts: 549 Member: 73797 Status: Offline Thanks Meter: 19	Need solution with p2k easy tool.

04-04-2007, 09:54	#6 (permalink)
boria Freak Poster Join Date: Oct 2003 Location: Poland, Gliwice Age: 43 Posts: 131 Member: 41307 Status: Offline Thanks Meter: 2	as I told You before just change model of your handset in P2K_Easy_Tool_v39 to V980 Micron or V980 Intel, for me works fine with every v975, E1000 and c975 with 0x1DE error.

04-06-2007, 13:25	#11 (permalink)
MDK23 No Life Poster Join Date: Mar 2007 Location: ALGERIA Age: 17 Posts: 3,165 Member: 467636 Status: Offline Sonork: Double Kanon Thanks Meter: 2,654	my bro use UBL is Good

04-25-2007, 16:41	#13 (permalink)
dotade06 Junior Member Join Date: Jan 2007 Location: Around Posts: 35 Member: 441055 Status: Offline Thanks Meter: 2	Using P2k v.3.9, connect select the phone model select unlock without TP. As soon as the first loader is sent, when it ask you to power it on in flash mode remove it. It will power on.

05-06-2007, 15:14	#15 (permalink)
hamada clever Junior Member Join Date: Apr 2007 Posts: 20 Member: 489353 Status: Offline Thanks Meter: 4	good work brother works well with me thank you a lot........