Lg G4 Dead boot Repair Qualcomm 9008 - GSM-Forum

aftabadil · 09-18-2016, 09:03

Tools Required:
1. Card Reader+Data Cable
2. A SD Card - 32 GB
3. SD Card Formatter
4. Win32DiskImager
5. Original KDZ
6. SystemImage Bin File Model vies
7. LGUP Tool
Steps to Unbrick:
1. Insert your memory card in Card Reader and Format it using Windows Format. While formatting "uncheck Quick Format" and Change Type to "exFat". You can alternatively use SD Card Formatter but make sure that the card is in exFat format.
2. Once format is completed, install Win32DiskImager and open it. Add SystemImage.bin file. If it does not show the bin file just rename SystemImage.bin to SystemImage.img or select all and then select it. Select your memory card and Click Write.
(You can alternatively change the file types on the win32diskimage from .img to all types)
Win32diskimage
3. One the Write Completes. Eject Card and insert in your mobile. Press Volume Up Button while connecting the USB Cable.
4. There you go, it will open the download mode. Now Open LGUP Tool as admin. It will show the device as connected. Select the Original KDZ Firmware and Click Start. it will complete and your Mobile will reboot.
5. Now its Done. Enjoy!

09-18-2016, 09:03	#1 (permalink)
aftabadil Junior Member Join Date: May 2007 Posts: 31 Member: 514236 Status: Offline Thanks Meter: 5	Lg G4 Dead boot Repair Qualcomm 9008 Tools Required: 1. Card Reader+Data Cable 2. A SD Card - 32 GB 3. SD Card Formatter 4. Win32DiskImager 5. Original KDZ 6. SystemImage Bin File Model vies 7. LGUP Tool Steps to Unbrick: 1. Insert your memory card in Card Reader and Format it using Windows Format. While formatting "uncheck Quick Format" and Change Type to "exFat". You can alternatively use SD Card Formatter but make sure that the card is in exFat format. 2. Once format is completed, install Win32DiskImager and open it. Add SystemImage.bin file. If it does not show the bin file just rename SystemImage.bin to SystemImage.img or select all and then select it. Select your memory card and Click Write. (You can alternatively change the file types on the win32diskimage from .img to all types) Win32diskimage 3. One the Write Completes. Eject Card and insert in your mobile. Press Volume Up Button while connecting the USB Cable. 4. There you go, it will open the download mode. Now Open LGUP Tool as admin. It will show the device as connected. Select the Original KDZ Firmware and Click Start. it will complete and your Mobile will reboot. 5. Now its Done. Enjoy!