New LGFlashTool 1.6
 

LGFlashTool 1.6.01.0529

MegaLock.dll (put in C:\LG\LGFlashTool)

Important Notes
 

You need the correct DLL file for your phone.
Each supported LG model has it's own DLL file.
Don't request DLL files in this thread.
Request DLL files here -> http://forum.gsmhosting.com/vbb/f177...-here-1725106/

Drivers: Don't request Drivers in this thread.
You need the correct drivers installed, request at the same link above.

Your phone must be connected on COM41
Check in Device Manger and make sure your phone is connected on COM41,
if your phone is not on COM41, then you must change it in device manger.

Supported Models
LGFlashTool supports most new LG phones,
Here is a list of some supported models -> http://pastebin.com/raw.php?i=SuBMNN5N

Supported Firmware:
.dz, .bin, .fls, .im, .binx, .pmp, .tot
Don't request firmware in this thread, search the forum.

request any help here: http://forum.gsmhosting.com/vbb/f177...-here-1725106/

How to flash LG G2 Verizon -- http://forum.xda-developers.com/show....php?t=2448960

Qualcomm, MTK, TI OMAP, Infineon, NVidia, etc

this is LG flasher, you need dll for each LG file.
if "LGFlashTool" is in the dll filename, its supported.

anyone know how to disable the tot crc checks in LG Flash? If you modify the .tot the crc check errors out. Looking thru the LG Flash dll... i see there is a "skip crc" function... but I am not sure how to use it.

wrong dll for kc910 whats wrong please help

Flasher for LG KC910 Renoir is LGMDP, not LG Flash Tool.

please help me http://forum.gsmhosting.com/vbb/atta...5&d=1382702984

http://forum.gsmhosting.com/vbb/atta...4&d=1382702984
please help sir

do not erase EFS or you will get yellow screen.

http://forum.gsmhosting.com/vbb/f177...-guide-752843/

make sure you install drivers and put phone in emergency download mode.

new version is available: LGFlashTool V1.8.1 - xda-developers

I have a client who somehow flashed the LG LS-980(Sprint) to the firmware for the LG LV-980 (Verizon) and the phone boots to the Verizon setup wizard but reboots soon after and is completely inoperable. When using LGFlashTool to attempt to restore the proper firmware back to LS-980 (Sprint) I get an error that says the DLL does not match because the phone is now showing its a LV-980. Is there a way to bypass that check and restore the proper firmware?

Wrong DLL for rd3610
 

Wrong DLL error for rd3610 model kindly help.:confused:

hello mr LBOZ, it seems I have deleted the wrong thing on my phone and have bricked it. flash's abort so im attempting to unbrick and restore everything. I can follow the instructions up until the point that you configure the ports.

Problem is, "Ports" simply does not show up in device manager. I'm on windows 8. Is there an alternate way of getting the phone onto the correct port?

thanks in advance.

guys my second problem is that my imei null on the lg flashing tools... could this be repairable? some one help me please.. model lg gx f310l korea...i accidentally wipe the system in TWRP recovery...need some help from you guys... looping on recovery every boot or install custom rom