GX-25 - Full Factory Reset ??? - GSM-Forum

erha1 · 12-13-2005, 11:20

GX-25 - Full Factory Reset ??? How execute ???

bond95 · 12-13-2005, 11:26

Sharp reset EEP

1, push at once key 0+3+right option key up+red key (white screen)
2, in sequence push key 0,1,2,3, right option key up,1 (service menu)
3, write 99 and push right option key up
4, write 01 and push right option key up (now start RESET EEPROM)
Wait.....
5, push any key
6, push blue key menu (save)
7, power off

Platijet · 12-13-2005, 11:47

@bond95 :
first try and then post.this doesn't work on gx25.

@erha1 :

what you mean "why"??

tgg_bg · 02-09-2006, 19:24

Hi
Is It possible to open this service menu without first unlocking the phone with software unlocker?(I used Furious unlocker and now it is possible)
Entering a code?
Special keyboard combination?
And why is not possible?Could you share?
thanks

Pandemonio100 · 02-09-2006, 19:39

1) Remove SIM
2) Press 0,3,Right Soft Key, Power key together about 5 seconds. – The screen will flicker.
3) Press 0,1,2,3, Right Soft Key, 1 key sequentially.
--> Backlight turns on and ‘Manual Diag mode Input Function No. [_]’ is displayed.
4) Input '99' and press Soft2 key.
--> ‘F99 User Function – Input Mode No :_’ is displayed.
5) Input '1' and press Soft2 key.
--> Message "EE_FORMAT START" is displayed immediately, then after a short wait, the following lines will also be displayed
"EE_FORMAT OK"
"EE_INIT(1) START"
"EE-INIT(1)"
"FINISHED"
"PLEASE ANY KEY"
are displayed. (This takes a short while)
6) Press Soft 2
7) Press 'M' key. ( <--- very important )
‘Manual Diag mode Input Function No.[_]’ menu is displayed again.

Aamir_Zia · 02-09-2006, 20:33

this not works for GX25
but on older models then GX25

Platijet · 02-09-2006, 21:49

work's only to gx10/gx10i and for old versions of gx15

Pandemonio100 · 02-10-2006, 10:14

Strange i have ths procedure form Sharp doc information.

Platijet · 02-10-2006, 10:43

i mean step's 1 2 and 3. the rest is same. you can't enter diag mode using keypad in all models

AXP · 02-10-2006, 20:21

Is It possible to open this service menu in GX30i?

*phone-company* · 02-11-2006, 11:51

axp....of course it`s possible to open service menü in GX30i.....Just use Datacable, programm and your brain

hawks007 · 06-28-2009, 20:10

Quote:

Originally Posted by Pandemonio100

1) Remove SIM
2) Press 0,3,Right Soft Key, Power key together about 5 seconds. – The screen will flicker.
3) Press 0,1,2,3, Right Soft Key, 1 key sequentially.
--> Backlight turns on and ‘Manual Diag mode Input Function No. [_]’ is displayed.
4) Input '99' and press Soft2 key.
--> ‘F99 User Function – Input Mode No :_’ is displayed.
5) Input '1' and press Soft2 key.
--> Message "EE_FORMAT START" is displayed immediately, then after a short wait, the following lines will also be displayed
"EE_FORMAT OK"
"EE_INIT(1) START"
"EE-INIT(1)"
"FINISHED"
"PLEASE ANY KEY"
are displayed. (This takes a short while)
6) Press Soft 2
7) Press 'M' key. ( <--- very important )
‘Manual Diag mode Input Function No.[_]’ menu is displayed again.

hi work for me this method for Gx25 but litel difrence when i Press 0,3,Right Soft Key, Power key phone lcd remain black and i continue press 0,1,2,3 so on. my phone have broken conecter it wasnt conct with cable so thankss

Fat-Boy · 06-28-2009, 21:30

its not working for me. will try again later and let you guys know. thanks

12-13-2005, 11:20	#1 (permalink)
erha1 Junior Member Join Date: Nov 2003 Location: Poland Age: 52 Posts: 7 Member: 44293 Status: Offline Thanks Meter: 0	GX-25 - Full Factory Reset ??? GX-25 - Full Factory Reset ??? How execute ??? Last edited by erha1; 12-13-2005 at 12:17.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How making full factory reset on 7650 with keypad?	cyberbob	WD2 & APE (Symbian Phones)	7	05-16-2003 17:40
How making full factory reset on 7250 with keypad?	patric	Nokia Digital Core Technology 4 ( DCT-4 )	2	05-15-2003 11:50
7210 Full Factory Reset	YaSSaX	Nokia Digital Core Technology 4 ( DCT-4 )	2	12-29-2002 20:11
full factory reset on dct4	samson111	Nokia Digital Core Technology 4 ( DCT-4 )	4	04-27-2002 18:43
6210 full factory reset	tkerek	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	01-08-2002 23:35

12-13-2005, 11:26	#2 (permalink)
bond95 No Life Poster Join Date: Feb 2005 Location: Lviv Age: 61 Posts: 644 Member: 121481 Status: Offline Thanks Meter: 432	Sharp reset EEP 1, push at once key 0+3+right option key up+red key (white screen) 2, in sequence push key 0,1,2,3, right option key up,1 (service menu) 3, write 99 and push right option key up 4, write 01 and push right option key up (now start RESET EEPROM) Wait..... 5, push any key 6, push blue key menu (save) 7, power off

12-13-2005, 11:47	#3 (permalink)
Platijet No Life Poster Join Date: Apr 2003 Location: Greece Age: 47 Posts: 3,358 Member: 26279 Status: Offline Thanks Meter: 274	@bond95 : first try and then post.this doesn't work on gx25. @erha1 : what you mean "why"??

02-09-2006, 19:24	#4 (permalink)
tgg_bg Junior Member Join Date: Feb 2006 Posts: 2 Member: 230242 Status: Offline Thanks Meter: 0	Hi Is It possible to open this service menu without first unlocking the phone with software unlocker?(I used Furious unlocker and now it is possible) Entering a code? Special keyboard combination? And why is not possible?Could you share? thanks

02-09-2006, 19:39	#5 (permalink)
Pandemonio100 No Life Poster Join Date: Feb 2001 Location: ITALY Age: 51 Posts: 3,969 Member: 3381 Status: Offline Thanks Meter: 1,171	1) Remove SIM 2) Press 0,3,Right Soft Key, Power key together about 5 seconds. – The screen will flicker. 3) Press 0,1,2,3, Right Soft Key, 1 key sequentially. --> Backlight turns on and ‘Manual Diag mode Input Function No. [_]’ is displayed. 4) Input '99' and press Soft2 key. --> ‘F99 User Function – Input Mode No :_’ is displayed. 5) Input '1' and press Soft2 key. --> Message "EE_FORMAT START" is displayed immediately, then after a short wait, the following lines will also be displayed "EE_FORMAT OK" "EE_INIT(1) START" "EE-INIT(1)" "FINISHED" "PLEASE ANY KEY" are displayed. (This takes a short while) 6) Press Soft 2 7) Press 'M' key. ( <--- very important ) ‘Manual Diag mode Input Function No.[_]’ menu is displayed again.

02-09-2006, 20:33	#6 (permalink)
Aamir_Zia No Life Poster Join Date: Dec 2003 Location: Karachi Pakistan Age: 38 Posts: 6,770 Member: 47321 Status: Offline Sonork: 100.54032 Thanks Meter: 497	this not works for GX25 but on older models then GX25

02-09-2006, 21:49	#7 (permalink)
Platijet No Life Poster Join Date: Apr 2003 Location: Greece Age: 47 Posts: 3,358 Member: 26279 Status: Offline Thanks Meter: 274	work's only to gx10/gx10i and for old versions of gx15

02-10-2006, 10:14	#8 (permalink)
Pandemonio100 No Life Poster Join Date: Feb 2001 Location: ITALY Age: 51 Posts: 3,969 Member: 3381 Status: Offline Thanks Meter: 1,171	Strange i have ths procedure form Sharp doc information.

02-10-2006, 10:43	#9 (permalink)
Platijet No Life Poster Join Date: Apr 2003 Location: Greece Age: 47 Posts: 3,358 Member: 26279 Status: Offline Thanks Meter: 274	i mean step's 1 2 and 3. the rest is same. you can't enter diag mode using keypad in all models

02-10-2006, 20:21	#10 (permalink)
AXP Junior Member Join Date: Feb 2006 Posts: 10 Member: 230321 Status: Offline Thanks Meter: 0	Is It possible to open this service menu in GX30i?

02-11-2006, 11:51	#11 (permalink)
phone-company No Life Poster Join Date: Mar 2004 Location: Nederlands / Germany / Danmark Age: 51 Posts: 2,461 Member: 60001 Status: Offline Sonork: 100.106474 Thanks Meter: 151	axp....of course it`s possible to open service menü in GX30i.....Just use Datacable, programm and your brain

06-28-2009, 21:30	#13 (permalink)
Fat-Boy Crazy Poster Join Date: Aug 2007 Posts: 46 Member: 577194 Status: Offline Thanks Meter: 5	its not working for me. will try again later and let you guys know. thanks