gx10i xxxx - GSM-Forum

mobitek · 12-03-2005, 15:44

Have 1 with 4 xxxx on screen when start up ? i can get into diag mode but not sure what to do from here

mobitek · 12-05-2005, 11:54

Quote:

Originally Posted by mobitek

Have 1 with 4 xxxx on screen when start up ? i can get into diag mode but not sure what to do from here

Need some help here plz,

AdrianO · 12-05-2005, 12:05

Use this program .. and everything will be ok

Default Test

br
AdrianO

mobitek · 12-05-2005, 13:44

Quote:

Originally Posted by AdrianO

Use this program .. and everything will be ok
Default Test
br
AdrianO

thanks m8 but no cable, can it be done without cable?

Platijet · 12-05-2005, 15:15

are you shure that your phone is GX10i ??

try this solution.doesn't need cable.

Remove SIM
(phone is off)
1- Press 0, 3, top right key and Red key together for about 3 secs until a white display is shown.

2-Press 0, 1, 2, 3, top right key, 1, in sequence. The Diagnosis menu should be displayed.

3- Enter 99 and press the top right key. A message should be displayed saying Input Mode No:

4-Enter 1 and press the top right key. The following messages should appear:
· EE_FORMAT START
· EE_FORMAT OK
· EE_INIT(1) START
· EE_INIT(1) OK
· BBSRAM CLEAR END
· FINISHED
· PLEASE ANY KEY
5- Wait until all the above messages are displayed and then press the top right key.
6- Press the M key (very important). Message should display Diag Param Saving.
7- Press the red key to power down the phone

mobitek · 12-07-2005, 10:29

Quote:

Originally Posted by Platijet

are you shure that your phone is GX10i ??
try this solution.doesn't need cable.
Remove SIM
(phone is off)
1- Press 0, 3, top right key and Red key together for about 3 secs until a white display is shown.
2-Press 0, 1, 2, 3, top right key, 1, in sequence. The Diagnosis menu should be displayed.
3- Enter 99 and press the top right key. A message should be displayed saying Input Mode No:
4-Enter 1 and press the top right key. The following messages should appear:
· EE_FORMAT START
· EE_FORMAT OK
· EE_INIT(1) START
· EE_INIT(1) OK
· BBSRAM CLEAR END
· FINISHED
· PLEASE ANY KEY
5- Wait until all the above messages are displayed and then press the top right key.
6- Press the M key (very important). Message should display Diag Param Saving.
7- Press the red key to power down the phone

Ok done everything you said but when i get to 3- enter 99 than top right key i get a msg saying, "F09 Diag Function" And nothing else, Really need help here please

AdrianO · 12-07-2005, 14:44

U must have a UNLOCK GX10 Cable ..

br
AdrianO

Unlocker AL · 12-09-2005, 13:38

Quote:

Originally Posted by AdrianO

Use this program .. and everything will be ok
Default Test
br
AdrianO

for me this soft does not work

Seedy · 06-30-2007, 20:02

I know this is an old topic but this is just to thanks for the Defaul Test sw - it just revived a GX10i i had stuck on xxxx for ages

12-03-2005, 15:44	#1 (permalink)
mobitek Freak Poster Join Date: Jul 2005 Age: 51 Posts: 186 Member: 161012 Status: Offline Thanks Meter: 1	gx10i xxxx Have 1 with 4 xxxx on screen when start up ? i can get into diag mode but not sure what to do from here

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
From N80 4.xxxx.xx.41 to N80ie 4.xxxx.xx.38	john_Denver	Nokia Base Band 5 ( BB-5 )	6	12-05-2006 18:44
Xxxx Zulea Where Has All The Support Gone ??????? Xxxx	stevier	SonyEricsson (USB-Smart)	4	03-28-2006 13:32
GX10 and GX10i - the same ? need unlock to GX10i	sp-lox	Sharp	7	08-19-2003 09:57

12-05-2005, 12:05	#3 (permalink)
AdrianO Freak Poster Join Date: Apr 2004 Location: Night Mare Age: 47 Posts: 108 Member: 61859 Status: Offline Thanks Meter: 2	Use this program .. and everything will be ok Default Test br AdrianO

12-05-2005, 15:15	#5 (permalink)
Platijet No Life Poster Join Date: Apr 2003 Location: Greece Age: 47 Posts: 3,358 Member: 26279 Status: Offline Thanks Meter: 274	are you shure that your phone is GX10i ?? try this solution.doesn't need cable. Remove SIM (phone is off) 1- Press 0, 3, top right key and Red key together for about 3 secs until a white display is shown. 2-Press 0, 1, 2, 3, top right key, 1, in sequence. The Diagnosis menu should be displayed. 3- Enter 99 and press the top right key. A message should be displayed saying Input Mode No: 4-Enter 1 and press the top right key. The following messages should appear: · EE_FORMAT START · EE_FORMAT OK · EE_INIT(1) START · EE_INIT(1) OK · BBSRAM CLEAR END · FINISHED · PLEASE ANY KEY 5- Wait until all the above messages are displayed and then press the top right key. 6- Press the M key (very important). Message should display Diag Param Saving. 7- Press the red key to power down the phone

12-07-2005, 14:44	#7 (permalink)
AdrianO Freak Poster Join Date: Apr 2004 Location: Night Mare Age: 47 Posts: 108 Member: 61859 Status: Offline Thanks Meter: 2	U must have a UNLOCK GX10 Cable .. br AdrianO

06-30-2007, 20:02	#9 (permalink)
Seedy No Life Poster Join Date: Dec 2001 Posts: 1,175 Member: 8102 Status: Offline Thanks Meter: 118	I know this is an old topic but this is just to thanks for the Defaul Test sw - it just revived a GX10i i had stuck on xxxx for ages