A800 Flashes, but not turn on. - GSM-Forum

Alex1234 · 10-02-2003, 05:42

I have one a800, water damaged.
It flashes OK, but no power on

Any suggestions?

WillGsm · 10-02-2003, 08:38

Change your flash IC, reflash it.

Syed · 10-02-2003, 12:12

changing flash is almost impossible.....it is glued more over can u charge ????

WBR
Syed

Alex1234 · 10-03-2003, 05:13

Glued... I remove glue.
It not so hard.

Syed · 10-03-2003, 06:55

@Alex1234

Nothing could be better then...... :-)
have a nice time repairing your phone.....

WBR
Syed

Alex1234 · 10-03-2003, 07:40

There are one contact point under flash is damaged...
I don't want to find line for this point, so phone is Dead...
Good Samsung phone - Dead phone.

AndreS · 10-12-2003, 20:34

pleaes tell me how can you remove the glue
10x in advance
andres

Alex1234 · 10-13-2003, 05:50

For removing glue i use hot air station and soldering iron.
1. Warm flash by hot air about 350-400 c.
2. Carefully scrape glue around flash IC by soldering iron.
3. Warm up & remove IC .
4. Remove glue by iron.

By very carefull & all be Ok.
On Samsung it possible to remove Flash, Processor and eeprom.

AndreS · 10-17-2003, 09:03

10x man

10-02-2003, 05:42	#1 (permalink)
Alex1234 Freak Poster Join Date: Jun 2003 Location: Russia Age: 45 Posts: 285 Member: 31044 Status: Offline Thanks Meter: 0	A800 Flashes, but not turn on. I have one a800, water damaged. It flashes OK, but no power on Any suggestions?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Imate JasJar Entering Bootloader mode but not turning on.	ZODI.	HTC & PDA WM( With Touchscreen)	7	11-15-2008 19:09
2600 flashing okay but not turn on	c_ahmad79	Nokia Hardware & Hardware Repair	6	07-26-2006 19:24
Alcatel 311 charging but not turning on!!!!	agpla	BF, BG, TH, BHx Series	3	04-18-2005 11:55
A800 charging but not power on	patric	Samsung Hardware Repair	0	04-08-2005 11:19
T610, turn off, but not turn on.....	PaPiTo	Sony Ericsson Hardware Repair	0	01-20-2005 23:05

10-02-2003, 08:38	#2 (permalink)
WillGsm Freak Poster Join Date: Nov 2001 Posts: 274 Member: 7398 Status: Offline Thanks Meter: 0	Change your flash IC, reflash it.

10-02-2003, 12:12	#3 (permalink)
Syed No Life Poster Join Date: Jan 2003 Location: Hong Kong. Age: 47 Posts: 3,092 Member: 19979 Status: Offline Thanks Meter: 116	changing flash is almost impossible.....it is glued more over can u charge ???? WBR Syed

10-03-2003, 05:13	#4 (permalink)
Alex1234 Freak Poster Join Date: Jun 2003 Location: Russia Age: 45 Posts: 285 Member: 31044 Status: Offline Thanks Meter: 0	Glued... I remove glue. It not so hard.

10-03-2003, 06:55	#5 (permalink)
Syed No Life Poster Join Date: Jan 2003 Location: Hong Kong. Age: 47 Posts: 3,092 Member: 19979 Status: Offline Thanks Meter: 116	@Alex1234 Nothing could be better then...... :-) have a nice time repairing your phone..... WBR Syed

10-03-2003, 07:40	#6 (permalink)
Alex1234 Freak Poster Join Date: Jun 2003 Location: Russia Age: 45 Posts: 285 Member: 31044 Status: Offline Thanks Meter: 0	There are one contact point under flash is damaged... I don't want to find line for this point, so phone is Dead... Good Samsung phone - Dead phone.

10-12-2003, 20:34	#7 (permalink)
AndreS No Life Poster Join Date: Aug 2003 Location: at home Posts: 4,432 Member: 36951 Status: Offline Sonork: 100.63212 Thanks Meter: 6,247	pleaes tell me how can you remove the glue 10x in advance andres

10-13-2003, 05:50	#8 (permalink)
Alex1234 Freak Poster Join Date: Jun 2003 Location: Russia Age: 45 Posts: 285 Member: 31044 Status: Offline Thanks Meter: 0	For removing glue i use hot air station and soldering iron. 1. Warm flash by hot air about 350-400 c. 2. Carefully scrape glue around flash IC by soldering iron. 3. Warm up & remove IC . 4. Remove glue by iron. By very carefull & all be Ok. On Samsung it possible to remove Flash, Processor and eeprom.

10-17-2003, 09:03	#9 (permalink)
AndreS No Life Poster Join Date: Aug 2003 Location: at home Posts: 4,432 Member: 36951 Status: Offline Sonork: 100.63212 Thanks Meter: 6,247	10x man