T100 "dead" after use of DirectIMEIWriter - GSM-Forum

zebraC · 02-20-2005, 22:17

Hi all,

I am new to phone flashing, so please bear with me.

I recently tried to "unlock" a Samsung T100 using USTv6.0. I could "Net unlock" it just fine using this and the normal mobile to serial (COM) cable. I realised I needed to re-write the IMEI as well. I found that USVv6.0 could not do this for me. =(

I went in search of another tool - in the form of DirectIMEIWriter. After running its "test" program - and putting the phone in "TEST" mode, I tried to change the IMEI - and the phone no longer responded!

Now the phone seems physically "dead". I can no longer power it up and it will not respond to the signals I send it from the computer. =(

What should I do? I really hope this phone is not now useless.

Many thanks.

zebra.

GOODNESS · 02-21-2005, 07:55

try to remove the battery and charge it fully,then put the battery back and
flash it with t100 wintdn

zebraC · 02-21-2005, 08:43

Found v2.0 of the software. So far, no luck. It does not seem to do anything when flashing. Found OGM and AXF files. Seems to not respond/show any progress. =(.

Still no ability to "power" the phone.

02-20-2005, 22:17	#1 (permalink)
zebraC Junior Member Join Date: Feb 2005 Age: 41 Posts: 2 Member: 119258 Status: Offline Thanks Meter: 0	T100 "dead" after use of DirectIMEIWriter Hi all, I am new to phone flashing, so please bear with me. I recently tried to "unlock" a Samsung T100 using USTv6.0. I could "Net unlock" it just fine using this and the normal mobile to serial (COM) cable. I realised I needed to re-write the IMEI as well. I found that USVv6.0 could not do this for me. =( I went in search of another tool - in the form of DirectIMEIWriter. After running its "test" program - and putting the phone in "TEST" mode, I tried to change the IMEI - and the phone no longer responded! Now the phone seems physically "dead". I can no longer power it up and it will not respond to the signals I send it from the computer. =( What should I do? I really hope this phone is not now useless. Many thanks. zebra.

02-21-2005, 08:43	#3 (permalink)
zebraC Junior Member Join Date: Feb 2005 Age: 41 Posts: 2 Member: 119258 Status: Offline Thanks Meter: 0	Found v2.0 of the software. So far, no luck. It does not seem to do anything when flashing. Found OGM and AXF files. Seems to not respond/show any progress. =(. Still no ability to "power" the phone. Last edited by zebraC; 02-21-2005 at 09:19.

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
My Genie-Universal "Dead" after Firmware upgrade to v0.183 [ANSWERED]	xiaoyuz	Genie Universal	9	03-28-2010 03:49
NK 5200 die after use of bluetooth	mdpm	Universalbox	4	04-09-2008 08:51
Smart-Clip dead after use of wrong polarity on power Adapter!!!	mayer	Smart-Clip	4	01-18-2005 19:27
Ericsson T28 "dead" after flashed eeprom	tratten	Old Ericsson Phones & Sony Phones	8	03-25-2003 11:56
T192 dead after use of test point.	Migeni	Motorola Old Legacy (EMMI)	8	02-18-2003 19:17

02-21-2005, 07:55	#2 (permalink)
GOODNESS Banned Join Date: Feb 2004 Location: Portharcourt,Nigeria Posts: 811 Member: 89584 Status: Offline Thanks Meter: 68	try to remove the battery and charge it fully,then put the battery back and flash it with t100 wintdn