GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Samsung Flashers, Software, Firmware. (https://forum.gsmhosting.com/vbb/f200/)
-   -   Samsung e2530 successfully flash done with flasher . (https://forum.gsmhosting.com/vbb/f200/samsung-e2530-successfully-flash-done-flasher-1491808/)

aZimBahar 06-17-2012 09:38
Samsung e2530 successfully flash done with flasher .
 
Samsung e2530 successfully flash done with flasher .



Download mode- press * then connect usb .

here driver & flasher
flashtool_e2_rou.zip - 4shared.com - online file sharing and storage - download


Gide here for flash .
  • open FlashTool_E2
  • add bin file
  • add cds file
  • add dffs file
  • add psi file
  • now mark {starup in normal mode }
  • select erase while flash before download
  • click next
  • now click start usb1
  • connect phone with boot mode

here done log . . .
Quote:
Device synchronized.
Injecting EBL
Boot-loader is active
EBL version: xmm2130_JH1_512_128_10.2_M1S1 10..2
Boot mode is: BB
Using: Faster CRC, Writing all blocks
Package length is 2048 - protocol: 1.16
Baud rate set to 921600
Get flash id.
CFI stage 1
Flash ID is: 88810089
CFI stage 2
Boot process finished

Start downloading item 'CODE:catfish.fls'' from file 'D:\HWK SAMSUNG FILE\E2530\E2530XXKE3_OXAKD2\E2530XXKE3_bin.fls''.
Erasing all flash memory
Sending sec-pack.
Load region 0
Use flash pre-erase.
Sending data.
WARNING: Target EBL does not support NVM handling
Sending end-pack.
Checksum OK (0x1DC2)
Verify OK
Process time was 5 min 10 sec.

Start downloading item 'CODE:catfish.fls'' from file 'D:\HWK SAMSUNG FILE\E2530\E2530XXKE3_OXAKD2\E2530XXKE3_cds.fls''.
Sending sec-pack.
Load region 0
Use flash pre-erase.
Sending data.
WARNING: Target EBL does not support NVM handling
Sending end-pack.
Checksum OK (0x2B38)
Verify OK
Process time was 9.6 sec.

Start downloading item 'CUST:temp_GT-E2530_OXA.dffs'' from file 'D:\HWK SAMSUNG FILE\E2530\E2530XXKE3_OXAKD2\E2530OXAKD2.dffs''.
Sending sec-pack.
Load region 0
Use flash pre-erase.
Sending data.
Sending end-pack.
Verify OK
Process time was 1 min 21 sec.

Start downloading item 'BOOT CORE SLB:dwdtoolsrc/bootcore/make/.output/XMM6180_EHS2AGR_CATFISH_NOR_IVY/fls/psi_flash.fls'' from file 'D:\HWK SAMSUNG FILE\E2530\E2530XXKE3_OXAKD2\E2530XXKE3_psi_flash. fls''.
Sending sec-pack.
Load region 0
Use flash pre-erase.
Sending data.
Sending end-pack.
Checksum OK (0xFE89)
Verify OK
Process time was 562 msec.

Total time was 6 min 44 sec.
Channel 1 is succesfully closed.
If your computer does not detect your phone:

1. Run flashtool E2
2. connect phone to computer WITHOUT battery
3. insert the charged battery to phone

aZimBahar 09-08-2012 09:25
If your computer does not detect your phone:
  • 1. Run flashtool E2
  • 2. connect phone to computer WITHOUT battery
  • 3. insert the charged battery to phone

Here More About Samsung Infinion Mobile .
All Gide Of Samsung Infinion Mobile A To Z
http://forum.gsmhosting.com/vbb/f200...3/#post8735173




Br,
One-Man
..::azimbahar::..

rajeshorissa.30 01-27-2013 15:30
how to unlock samsung c 3262...........

Md Salim Khan 03-12-2014 15:18
Quote:
Originally Posted by ..::One-Man::.. (Post 8508588)
Samsung e2530 successfully flash done with flasher .



Download mode- press * then connect usb .

here driver & flasher
flashtool_e2_rou.zip - 4shared.com - online file sharing and storage - download


Gide here for flash .
  • open FlashTool_E2
  • add bin file
  • add cds file
  • add dffs file
  • add psi file
  • now mark {starup in normal mode }
  • select erase while flash before download
  • click next
  • now click start usb1
  • connect phone with boot mode

here done log . . .


If your computer does not detect your phone:

1. Run flashtool E2
2. connect phone to computer WITHOUT battery
3. insert the charged battery to phone
Thank fine working
I fail to flash Z3X but success flash by this tool
http://img28.imageshack.us/img28/8795/19ws.jpg

iSplit 03-14-2014 09:02
Quote:
Originally Posted by ..::One-Man::.. (Post 8735191)
If your computer does not detect your phone:
  • 1. Run flashtool E2
  • 2. connect phone to computer WITHOUT battery
  • 3. insert the charged battery to phone

Here More About Samsung Infinion Mobile .
All Gide Of Samsung Infinion Mobile A To Z





Br,
One-Man
..::azimbahar::..
nice.........
so help me sirrr............

active sagor 11-27-2014 10:16
Quote:
Originally Posted by ..::One-Man::.. (Post 8508588)
Samsung e2530 successfully flash done with flasher .



Download mode- press * then connect usb .

here driver & flasher
flashtool_e2_rou.zip - 4shared.com - online file sharing and storage - download


Gide here for flash .
  • open FlashTool_E2
  • add bin file
  • add cds file
  • add dffs file
  • add psi file
  • now mark {starup in normal mode }
  • select erase while flash before download
  • click next
  • now click start usb1
  • connect phone with boot mode

here done log . . .


If your computer does not detect your phone:

1. Run flashtool E2
2. connect phone to computer WITHOUT battery
3. insert the charged battery to phone




brother download link not work ...

yasir kamal 12-08-2014 12:58
Quote:
Originally Posted by iSplit (Post 10164605)
nice.........
so help me sirrr............
link not working sir:(

the_faker 10-16-2015 09:43
link not work ..................

jordache 09-05-2018 22:01
please new link......

...:::::NP™:::::... 09-05-2018 22:51
Hi,

If you need to download the tool, check here #1, the link has been updated.

If you need to download flash files, E2530XXJK6 or E2530






Sometimes old things are very important :) ;)

jordache 09-06-2018 00:16
thank you !!!!
but it doesnt work




Device synchronized.
Injecting EBL-Loader (RPSI).
Injecting EBL
Boot-loader is active
EBL version: xmm2130_JH1_512_128_10.2_M1S1 10..2
Boot mode is: BB
Using: Faster CRC, Writing all blocks
Package length is 2048 - protocol: 1.16
Baud rate set to 921600
Get flash id.
CFI stage 1
Flash ID is: 88810089
CFI stage 2
Boot process finished

Start downloading item 'BOOT CORE SLB:dwdtoolsrc/bootcore/make/.output/XMM6180_EHS2AGR_CATFISH_NOR_IVY/fls/psi_flash.fls'' from file 'C:\Users\kouka\Downloads\E2530XXJK6\E2530_XXJK6\E 2530XXJK6\E2530 PRO E2530XXJK6\E2530XXJK6_psi_flash.fls''.
Erasing all flash memory
Process time was 11 min 17 sec.

WIN32 Comport error 31. Line 2175
The windows COM port driver has reported the specified error.
Check the Microsoft Win32 Error descriptions for further explanations.
Channel 1 is succesfully closed.

jordache 09-06-2018 01:14
thank you !!!!
how its possible but its ok for me
thank you thank you thank you

...:::::NP™:::::... 09-06-2018 06:04
Hi,

All the drivers have been installed properly, especially infineon driver ?

currently this phone has not yet received for flash by win7 because it is very old, but it has worked with Win XP SP3.


All times are GMT +1. The time now is 01:36.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.18081 seconds with 6 queries

SEO by vBSEO