939 FW4,1M Hardware Failure - GSM-Forum

MPS · 10-28-2002, 00:20

939 FW4,1M Hardware Failure!!!
Any sugesstion? Anybody may hel me?

Regards,
MPS

MPS · 10-29-2002, 11:14

no solution??
regards,
MPS

10-29-2002, 22:47

Put "00" in field 231.

MPS · 10-30-2002, 07:40

Thanks, but 231 stay 00.
Regards,
MPS

RUM · 10-30-2002, 08:29

in field 231 =05
if phone not contain phisical external eeprom - this big problem !!!

chris922 · 10-30-2002, 10:36

This field claims to be 00. But in fact it is 05.
Try to write this field with sagemdr.. You will get an error.
So either if this phone has a physical eeprom, you can read the content with ponyprogrammer and use sagemfieldextractor to repaur field 231 and write it back to the phone...
Or you can set the second byte from field 168 to 01.
But then, you have to repair the checksum for this field.

10-28-2002, 00:20	#1 (permalink)
MPS Freak Poster Join Date: Nov 2001 Location: Poland Posts: 302 Member: 7365 Status: Offline Thanks Meter: 2	939 FW4,1M Hardware Failure 939 FW4,1M Hardware Failure!!! Any sugesstion? Anybody may hel me? Regards, MPS

10-30-2002, 08:29	#5 (permalink)
RUM Freak Poster Join Date: Feb 2002 Location: BELARUS Posts: 368 Member: 9791 Status: Offline Thanks Meter: 4	put 00 to field 231 in field 231 =05 if phone not contain phisical external eeprom - this big problem !!! Last edited by RUM; 10-30-2002 at 08:50.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP,I need flash file for 939 FW4.1M	lapik	Infineon C16X M51 & ARM7 M52 BASED	1	12-06-2002 01:15
Hardware failure on a 939 FW4,0V	mr_x4you	Infineon C16X M51 & ARM7 M52 BASED	9	10-09-2002 16:25
Sagem FW930 4.1M Hardware failure	mr_x4you	ARM9 BASED M62 / M62+	0	06-27-2001 07:30
Sagem 922 4.1M Hardware failure	Niksy	ARM9 BASED M62 / M62+	0	11-21-2000 07:04
Sagem MC922 v4.1M hardware failure!!!!	tomi_no	ARM9 BASED M62 / M62+	2	11-15-2000 09:55

10-29-2002, 11:14	#2 (permalink)
MPS Freak Poster Join Date: Nov 2001 Location: Poland Posts: 302 Member: 7365 Status: Offline Thanks Meter: 2	no solution?? regards, MPS

10-29-2002, 22:47	#3 (permalink)
legija Guest Posts: n/a Member:	Put "00" in field 231.

10-30-2002, 07:40	#4 (permalink)
MPS Freak Poster Join Date: Nov 2001 Location: Poland Posts: 302 Member: 7365 Status: Offline Thanks Meter: 2	Thanks, but 231 stay 00. Regards, MPS

10-30-2002, 10:36	#6 (permalink)
chris922 No Life Poster Join Date: Mar 2002 Posts: 774 Member: 10175 Status: Offline Thanks Meter: 0	This field claims to be 00. But in fact it is 05. Try to write this field with sagemdr.. You will get an error. So either if this phone has a physical eeprom, you can read the content with ponyprogrammer and use sagemfieldextractor to repaur field 231 and write it back to the phone... Or you can set the second byte from field 168 to 01. But then, you have to repair the checksum for this field.