MW930 strange problem! Help!!!!!!! - GSM-Forum

-=LTi=- · 08-21-2002, 07:43

Hi guys!

I have an MW930 FW: FF3,1T : 301000 1905
with this strange problem:

On the display i can read that 'Hardware Error .....' u know.
So somebody told me to write 0 to field 231.

But i couldn't write that field. sagem doctor can't even
read the right value from that field.I tried other sw that
can read & write fields & read was fine but no ona can write.

I tried some other sw that said click here to repair
'Hardware error ...' message on the screen.

And the strange thing is that when i say ok repair the problem
almost every sw can do it & it's workin' until the phone is on,
but when i turn off & on again the phone say 'Hardware Error....'
again!!!!!

Anybody know what couse this & how to repair?????
Urgent please help!!!!!

Sanchez · 08-21-2002, 09:42

Hi, in the new versions of 930 the field 231 is read/write protected (at least by cable) the only one solution is to read eeprom with pony programmer, patch it a little bit and write it back to the phone.

WBR Sanchez

-=LTi=- · 08-21-2002, 09:54

Ok. But what's that when i use a sw
to solve this problem.It can fix until
the phone is still on or when i try to
set the service mode it is the same
so the phone is working fine until
i turn it off and on again.

Sanchez · 08-21-2002, 09:57

Hhhhhm strange i hear somthing like this at first time, sorry buddy i dont know whats wrong. U can send eeprom (readed with pony) from the phone to me: [email protected] i can take a look, maybe i can help u.

WBR Sanchez

-=LTi=- · 08-21-2002, 10:01

Sorry i can't do that, 'couse i havn't got
a shematic 4 the pony programmer.
Do u have 1 4 me???
I would be very grateful.

Sanchez · 08-21-2002, 15:40

www.google.com search for pony programmer.

WBR Sanchez

ardagul · 08-21-2002, 20:10

I have a solution for this...............
you need 5V for charging pin 1 to connect...........it's important...

now you must be find correct code for simlock.........
we are ready to solve hardware failure mistakes on phone.
insert a sim card,
connect plug to phone off position phone starting charge normally
read field 268 and store it a paper.......
put field 268 : 00 00 than reset phone with sagem marker denny
phone starting it self and charging again.put field 268 old value and push power button look at the screen. sim locked.write correct code and phone unlocked...................

-=LTi=- · 08-22-2002, 08:17

ardagul

What's field 268?
And why do i have to do this beside charging?

ardagul · 08-23-2002, 21:25

I don't know excatly field 268 but I know this field is exual hard failure 268-5257 combination.............

some sagems haven't got eeprom pycical.Ýf you don't know monitor mode this no change any more .My solution work with ....
I make a lot of sagems this % 100 working .........

-=LTi=- · 08-24-2002, 07:48

Ok, thx m8!

Have a nice day!

08-21-2002, 07:43	#1 (permalink)
-=LTi=- Freak Poster Join Date: Oct 2001 Location: Behind the Moon Posts: 149 Member: 6874 Status: Offline Thanks Meter: 0	MW930 strange problem! Help!!!!!!! Hi guys! I have an MW930 FW: FF3,1T : 301000 1905 with this strange problem: On the display i can read that 'Hardware Error .....' u know. So somebody told me to write 0 to field 231. But i couldn't write that field. sagem doctor can't even read the right value from that field.I tried other sw that can read & write fields & read was fine but no ona can write. I tried some other sw that said click here to repair 'Hardware error ...' message on the screen. And the strange thing is that when i say ok repair the problem almost every sw can do it & it's workin' until the phone is on, but when i turn off & on again the phone say 'Hardware Error....' again!!!!! Anybody know what couse this & how to repair????? Urgent please help!!!!!

08-21-2002, 20:10	#7 (permalink)
ardagul No Life Poster Join Date: Nov 2001 Location: türkiye Age: 59 Posts: 1,814 Member: 7114 Status: Offline Thanks Meter: 51	hardware failure solution!!!!!!!! I have a solution for this............... you need 5V for charging pin 1 to connect...........it's important... now you must be find correct code for simlock......... we are ready to solve hardware failure mistakes on phone. insert a sim card, connect plug to phone off position phone starting charge normally read field 268 and store it a paper....... put field 268 : 00 00 than reset phone with sagem marker denny phone starting it self and charging again.put field 268 old value and push power button look at the screen. sim locked.write correct code and phone unlocked...................

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
K510 strange problem help...	Hengki	Sony Ericsson	0	06-03-2007 14:12
x60 strange problem help!!!!	cora	Infinity-Box	0	11-27-2006 03:28
Nokia 6230 strange problem!? Help...	pchelpsi	Nokia Digital Core Technology 4 ( DCT-4 )	7	06-09-2004 08:24
GD67 strange problem!!!HELP!!!	gsm4dcs	Panasonic	2	04-30-2003 23:01
6310i strange problem, help me!	pchelpsi	Nokia Digital Core Technology 4 ( DCT-4 )	5	11-27-2002 11:44

08-21-2002, 09:42	#2 (permalink)
Sanchez No Life Poster Join Date: Aug 2000 Posts: 1,231 Member: 1896 Status: Offline Thanks Meter: 101	Hi, in the new versions of 930 the field 231 is read/write protected (at least by cable) the only one solution is to read eeprom with pony programmer, patch it a little bit and write it back to the phone. WBR Sanchez

08-21-2002, 09:54	#3 (permalink)
-=LTi=- Freak Poster Join Date: Oct 2001 Location: Behind the Moon Posts: 149 Member: 6874 Status: Offline Thanks Meter: 0	Ok. But what's that when i use a sw to solve this problem.It can fix until the phone is still on or when i try to set the service mode it is the same so the phone is working fine until i turn it off and on again.

08-21-2002, 09:57	#4 (permalink)
Sanchez No Life Poster Join Date: Aug 2000 Posts: 1,231 Member: 1896 Status: Offline Thanks Meter: 101	Hhhhhm strange i hear somthing like this at first time, sorry buddy i dont know whats wrong. U can send eeprom (readed with pony) from the phone to me: [email protected] i can take a look, maybe i can help u. WBR Sanchez

08-21-2002, 10:01	#5 (permalink)
-=LTi=- Freak Poster Join Date: Oct 2001 Location: Behind the Moon Posts: 149 Member: 6874 Status: Offline Thanks Meter: 0	Sorry i can't do that, 'couse i havn't got a shematic 4 the pony programmer. Do u have 1 4 me??? I would be very grateful.

08-21-2002, 15:40	#6 (permalink)
Sanchez No Life Poster Join Date: Aug 2000 Posts: 1,231 Member: 1896 Status: Offline Thanks Meter: 101	www.google.com search for pony programmer. WBR Sanchez

08-22-2002, 08:17	#8 (permalink)
-=LTi=- Freak Poster Join Date: Oct 2001 Location: Behind the Moon Posts: 149 Member: 6874 Status: Offline Thanks Meter: 0	ardagul What's field 268? And why do i have to do this beside charging?

08-23-2002, 21:25	#9 (permalink)
ardagul No Life Poster Join Date: Nov 2001 Location: türkiye Age: 59 Posts: 1,814 Member: 7114 Status: Offline Thanks Meter: 51	I don't know excatly field 268 but I know this field is exual hard failure 268-5257 combination............. some sagems haven't got eeprom pycical.Ýf you don't know monitor mode this no change any more .My solution work with .... I make a lot of sagems this % 100 working .........

08-24-2002, 07:48	#10 (permalink)
-=LTi=- Freak Poster Join Date: Oct 2001 Location: Behind the Moon Posts: 149 Member: 6874 Status: Offline Thanks Meter: 0	Ok, thx m8! Have a nice day!