Activation hidden languages

[asmax1]

Wanna to activate foreign languages?just replace all values of field 185 with 12 zeroes(000000000000),then correct checksum,and enjoy all languages!

[mr_x4you]

this is not new, it was known before

[.:hack3r2k:.]

Originally Posted by mr_x4you

this is not new, it was known before

Hehe !

He rediscovered the wheel. Same way since 199x.

Br

[Leo777]

I apologize there now I did not it hear about this - whether this procedure is safe because I receive such announcement:

"the field is checsum protected writing it directly can be dangerous"

[marple]

Just litle question,for me who don't now how can i correct checksum-with which program please tell me.
regards

[dimK72]

Hello to everybody. I am new in this forum, and I will appreciate your help about activate the hidden languages. I buy the model my x6 in Italy and the packet of the languages are ENGLISH, DEUTSCH, ITALIAN, ESPANOLA, FRANCIS and automatic mode. But happens to be a Greek, so I would like to have the Greek language for the menu. Is the Greek language included in the hidden languages?
With the telmemplus I change the firmware of my phone so the status of my phone is the sequent

Firmware 251305584 orange
In the field 185 I have this.. FF FF FF FF 01 FD
So, with telmemplus I know how to rewrite the field, but I need instructions of how I correct the checksum to avoid sim block or other problems. Any help plz?

[Dark_Mage]

Yes I too would like to know it. It is thankful in advance

[Piolo]

My first message.

I too would like to know it.
In the field 185 I have: FF FF EF FF 13 BF

Firm JH3,BS

Thank you
bye

[.:hack3r2k:.]

185 is checksum protected... Correction of fields on newer phone is not possible with freely available method. ONE MORE THING...MODIFYING 185 DOESN'T NECESARELY BRINGS NEW LANGUAGES TO PHONE ...SO TAKE CARE


Br

[dimK72]

Thank you for your advice.So i must found another way for resolve that.Did anyone have a firmware that the Greek language is included ?I know that usually the languages are packet region , so it must be included in some firmware ...i hope.

[Dark_Mage]

Originally Posted by .:hack3r2k:.

185 is checksum protected... Correction of fields on newer phone is not possible with freely available method. ONE MORE THING...MODIFYING 185 DOESN'T NECESARELY BRINGS NEW LANGUAGES TO PHONE ...SO TAKE CARE


Br

As this field is protected at me is read
Field 185: FF FF FF FF 1D FD

[dimK72]

In the page http://prom.the.cz/full.php?field=185 I found this description for field 185. I know that is difficult to make a change in this field because is guard field protected. But if is true that the size is 6 byte ,can I change the combination of the language and make a new combination of languages that includes Italian, Greek and English (I have no interest for the other language) that will not change the final byte (6) and will not make necessary to change the value for guard field?In other words can i have a new combination of language that include Italian,Greek,English witch i will have the same checksum so I will not have to recalculate the checksum for field guard?
The field 185 in my phone have this value :
FF FF FF FF 01 FD
Even if my English is not very good I hope I can be understood,and have some help .Thanks

Field: 185

--------------------------------------------------------------------------------
Section: Language
--------------------------------------------------------------------------------
Size: 6 bytes
--------------------------------------------------------------------------------
Default value: FF FF FF BC 00 40
--------------------------------------------------------------------------------
Basic description: Set the languages that are available in your phone
--------------------------------------------------------------------------------
Warning: This field is checksum protected. Do not change it without checksum recalculation
--------------------------------------------------------------------------------
Full description
Field 185 sets the languaces that are accessable in your phone.
Appart from this, a language is only shown in the phone menue, if it is available in the Firmware.

Bit=1 means Language is deactivated
Bit=0 means Language is activated

WARNING: This field is checksum protected. Do not change it without checksum recalculation.

byte 1:
- not used - Set it to FF

byte 2:
bits 4 to 7 - not used - set them to 1
bit 3 : ANGLAIS ORANGE UK (Pour messages spécifiques)
bit 2 : ANGLAIS THAÏ (Pour messages spécifiques)
bit 1 : THAÏ
bit 0 : FARCI

byte 3:
bit 7 : GEORGIEN
bit 6 : HEBREUX
bit 5 : UKRAINIEN
bit 4 : HONGROIS
bit 3 : RUSSE
bit 2 : GERMAN (seconde langue allemande)
bit 1 : CROATE
bit 0 : AZERY

byte 4:
bit 7 : BULGARE
bit 6 : SLOVENE
bit 5 : ESTONIEN
bit 4 : ISLANDAIS
bit 3 : TAIWANAIS
bit 2 : CHINOIS
bit 1 : ROUMAIN
bit 0 : POLONAIS
byte 5:
bit 7 : ANGLAIS STD
bit 6 : ALLEMAND
bit 5 : FRANÇAIS
bit 4 : ITALIEN
bit 3 : ESPAGNOL
bit 2 : PORTUGAIS
bit 1 : NEERLANDAIS
bit 0 : TCHEQUE

byte 6:
bit 7 : LITUANIEN
bit 6 : GREC
bit 5 : FINNOIS
bit 4 : DANOIS
bit 3 : NORVEGIEN
bit 2 : SUEDOIS
bit 1 : TURC
bit 0 : SLOVAQUE

[stonesuk]

No ... even if you change 1 byte you MUST correct the guard field....

[Dark_Mage]

Thanks fo this message)))

[Netbazaar]

Hiya m8,

please, do help a novice on this...
Is there another way of activating the languages, without tampering with protected fields and checksums????

I do NOT like to play around with these fields...
Not even the code reader can help there...
And I don't have the Sagem Master...yet.

Appreciate your help, or any of the other Sagem Gurus.

Cheers

NH