C35 PA very hot when try to call - GSM-Forum

SVH · 02-02-2004, 15:55

C35 was dropped
i changed PA PF08112 on RF3103
now when i try to make call PA is very hot and output power is very low (measured with powermeter)
i try to change on another RF3103 and result the same
PA are work 100%
i placed these PA into C35 withiut any problem
any advice?
Thanx
br

Springer · 02-02-2004, 17:01

Hi, change antenna switch! And if not help, change the external antenna connector. (switch)

B.R.

SVH · 02-02-2004, 22:35

do you think im so stupid???
allready changed switcher and more - i soldered antenna direct to the switcher
so i need really useful help

StudioGSM · 02-02-2004, 22:56

Check big capasitor near PA. If it has short-circuit do ground. And all way from "+" bat to PA.

BR
StudioGSM.pl

SVH · 02-04-2004, 21:40

Quote:

Originally Posted by StudioGSM

Check big capasitor near PA. If it has short-circuit do ground. And all way from "+" bat to PA.

BR
StudioGSM.pl

allready checked - capacitor is good
and visually "+" line is good (not s.c.)
any ideas??

genocite · 02-08-2004, 15:37

what is this RF 3103 ?? never heard about it be4, is it the nokia 3310 black colour pa ? if yes, can it be used into C35 ?? i've ever tried that once but never work

Springer · 02-09-2004, 00:15

Yes. Rf3103 compatible with pf08109B an pf08112B. Good for c-s-m-a35, nok3310,3330,3410,3510(i),etc

hooi76 · 02-13-2004, 19:15

Hi Mr Springer.

How about C25? Is it compatible too?

**Brka** · 02-15-2004, 06:01

heh ...
not all series ar compatible ...

i had this case once ...

simply put PF08112B (original) or from 3310 - PF08109B ..
must work 100%

b.r.
ALexandar.

Madxim · 02-21-2004, 14:40

Quote:

Originally Posted by Brka

heh ...
not all series ar compatible ...

i had this case once ...

simply put PF08112B (original) or from 3310 - PF08109B ..
must work 100%

b.r.
ALexandar.

You right I had two phones(C35) on which 3103 was not work, on one phone in result i had hole in PA

, the best choice is using 08112 or 08109, i`m not tried 08125 may be somebody tried this one?
WBR
Max

2100 · 03-02-2004, 14:03

There is another compatibility PA used in 6610 (Name of Product is Argilent something.... with the code 8899).
I tested on 3310 and it's safe using it, no hot, no signal poor, nothing and it's durable in hot temperature while planting the PA to the board. I tried to take out and put it back and take out and put back 3-4 times (of course u need skills to do so without overheating it up-everthing will die of over heat stuff).

But i haven't tried on C35 since everybody is talking about the compatibilty of the pf08109B for C35, coz i don't have the phone to test.

02-02-2004, 15:55	#1 (permalink)
SVH No Life Poster Join Date: Mar 2002 Location: Europe, Lemberstadt Age: 53 Posts: 2,311 Member: 9889 Status: Offline Thanks Meter: 50	C35 PA very hot when try to call C35 was dropped i changed PA PF08112 on RF3103 now when i try to make call PA is very hot and output power is very low (measured with powermeter) i try to change on another RF3103 and result the same PA are work 100% i placed these PA into C35 withiut any problem any advice? Thanx br

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A2618 "Attention battery low" when try to call	SVH	Sony Ericsson Hardware Repair	5	07-30-2003 21:34
3310 when try to make call shut donw!!!!!¨¨	sergioems	Nokia Hardware & Hardware Repair	3	02-22-2003 04:46
138-04 hangs when i try to call	iHi	Alcatel & TCL Old Models	2	03-10-2002 18:47
problem with Eric 1018. It shows full network, but when I try to call, it goes down	sat	Sony Ericsson Hardware Repair	1	08-15-2001 10:36
I have c25 - everything OK- but when try to make a call ...	mcmomo	x1x to x45/x50	8	07-24-2001 20:33

02-02-2004, 17:01	#2 (permalink)
Springer Freak Poster Join Date: Sep 2002 Location: Nokialand Age: 43 Posts: 147 Member: 15909 Status: Offline Thanks Meter: 0	Hi, change antenna switch! And if not help, change the external antenna connector. (switch) B.R.

02-02-2004, 22:35	#3 (permalink)
SVH No Life Poster Join Date: Mar 2002 Location: Europe, Lemberstadt Age: 53 Posts: 2,311 Member: 9889 Status: Offline Thanks Meter: 50	do you think im so stupid??? allready changed switcher and more - i soldered antenna direct to the switcher so i need really useful help

02-02-2004, 22:56	#4 (permalink)
StudioGSM Freak Poster Join Date: Aug 2002 Location: Poland Age: 44 Posts: 303 Member: 15122 Status: Offline Thanks Meter: 18	Check big capasitor near PA. If it has short-circuit do ground. And all way from "+" bat to PA. BR StudioGSM.pl

02-08-2004, 15:37	#6 (permalink)
genocite No Life Poster Join Date: Jul 2001 Location: md Age: 25 Posts: 761 Member: 5379 Status: Offline Thanks Meter: 0	what is this RF 3103 ?? never heard about it be4, is it the nokia 3310 black colour pa ? if yes, can it be used into C35 ?? i've ever tried that once but never work

02-09-2004, 00:15	#7 (permalink)
Springer Freak Poster Join Date: Sep 2002 Location: Nokialand Age: 43 Posts: 147 Member: 15909 Status: Offline Thanks Meter: 0	Yes. Rf3103 compatible with pf08109B an pf08112B. Good for c-s-m-a35, nok3310,3330,3410,3510(i),etc

02-13-2004, 19:15	#8 (permalink)
hooi76 No Life Poster Join Date: Dec 2001 Location: In front of my computer Posts: 1,594 Member: 7741 Status: Offline Thanks Meter: 111	Hi Mr Springer. How about C25? Is it compatible too?

02-15-2004, 06:01	#9 (permalink)
Brka Moderator Join Date: Jun 1999 Location: Serbia Age: 48 Posts: 8,207 Member: 163 Status: Offline Thanks Meter: 7,786	heh ... not all series ar compatible ... i had this case once ... simply put PF08112B (original) or from 3310 - PF08109B .. must work 100% b.r. ALexandar.

03-02-2004, 14:03	#11 (permalink)
2100 Crazy Poster Join Date: Apr 2003 Posts: 53 Member: 27569 Status: Offline Thanks Meter: 0	There is another compatibility PA used in 6610 (Name of Product is Argilent something.... with the code 8899). I tested on 3310 and it's safe using it, no hot, no signal poor, nothing and it's durable in hot temperature while planting the PA to the board. I tried to take out and put it back and take out and put back 3-4 times (of course u need skills to do so without overheating it up-everthing will die of over heat stuff). But i haven't tried on C35 since everybody is talking about the compatibilty of the pf08109B for C35, coz i don't have the phone to test.