§§§== No More Adapt For F1 Very Simple==§§§ - GSM-Forum

bakarioss · 07-18-2007, 17:25

Use this modification on your F1 box , and use any cable UFS....JAFF....

Tested even last update , work nickel
just enjoy your work
bakarioss still YKECH

gsmcable · 07-18-2007, 21:03

for TX2?

B.R.
GSMCABLE

upgrader · 07-19-2007, 00:00

Quote:

Originally Posted by bakarioss

Use this modification on your F1 box , and use any cable UFS....JAFF....

Tested even last update , work nickel
just enjoy your work
bakarioss still YKECH

thanks mate but berrer to wait for bphreaks team to confirm if this ok.

br

bakarioss · 07-19-2007, 08:18

I made in my box 3 month Ago

Freestyler2000 · 07-19-2007, 09:04

Hi,

Thanks for suggesting this modification. It smells a bit of a Prodigy 7.02

I have just modified my device and tested flashing 6270.

NSS used Phone RX2 line and everything is fine.

As a note i would like to add that some cables use VPP on the place of RX2 line.
This VPP should be cut inside the battery connector. Otherwise the RX2 line
will short the VPP and the phone will not power on.

Best regards
Daniel

Freestyler2000 · 07-19-2007, 09:05

And this is the flashing log.

Flashing rm56b5003.85.ppm_c ...
Booting Phone...
RAP3 ASIC ID:000000010000022600010006010C...
RAP3 EM ASIC ID:00000232
RAP3 EM ASIC ID:00000352
RAP3 PUBLIC ID:12F001024CB95056DAA448324490...
RAP3 ASIC MODE:00
RAP3 HASH:BAF3A9C3DBFA8454937DB77F2B88...
RAP3 ROM ID:191EC665DFAAF68F
Sending RAP3 Bootloader...Done.
Sending RAP3 Algorithm...Done.
Phones booting completed in 0 min, 6 sec.
Erasing PPM area...Done.
Erasing completed in 0 min, 31 sec.
Flashing PPM area...Done.
Flashing completed in 0 min, 18 sec.
Phone Restarted.
NSS: Flashing complete.
NSS: Total time: 0 min 55 sec.
NSS: *********** AFP ***********
NSS: Scanning product via FBUS...Done.
NSS: Detected: RM-56
NSS: --> AFP complete.

bakarioss · 07-19-2007, 09:51

Tank you sir for testing , It's nice to support F1 great box for >NOKIA
Just one question , Do you have any future Module to add like ..samsung ...or..
AnyWay my setool card work fine Inside the SC , no need any modification.

Vansy · 07-19-2007, 10:11

First I have did this modify but after have RX2 line for use hight bootloader, I need to fix it back.

hrcell · 07-19-2007, 14:43

Quote:

Originally Posted by bakarioss

Use this modification on your F1 box , and use any cable UFS....JAFF....

Tested even last update , work nickel
just enjoy your work
bakarioss still YKECH

no need adaptor again sir??
10-8 pin

upgrader · 07-20-2007, 16:45

Quote:

Originally Posted by Freestyler2000

Hi,

Thanks for suggesting this modification. It smells a bit of a Prodigy 7.02

I have just modified my device and tested flashing 6270.

NSS used Phone RX2 line and everything is fine.

As a note i would like to add that some cables use VPP on the place of RX2 line.
This VPP should be cut inside the battery connector. Otherwise the RX2 line
will short the VPP and the phone will not power on.

Best regards
Daniel

may i know what are those some cables that uses vpp on the rx2 line

br

Freestyler2000 · 07-21-2007, 08:20

Actually, sorry to disappoint you guys, but this modification is only good for DCT4 without VPP attached pin.

We will prepare full diagrams of what needs to be done to modify it.

Best regards
Daniel

bakarioss · 07-21-2007, 10:20

About BB5 , Some Model Tested using 7pin Cable
=6630
=6680
=N70
=6280
=6131
=N72
that's 100000000% tested by me.

Remark : let's make small logical analyse if DCT4 work 100% with this modification and this cable work with other Nokia Tool , so BB5 cable work also with other box (UFS JAFF...) , finalize by logic BB5 7pin cable work with F1
b.r

RNC_EBM · 07-21-2007, 13:58

FOR RX2 LINE MODIFICATION

CHECK IT HERE

br

RNC_EBM

bakarioss · 08-02-2007, 22:22

Remark / My Modification not use RX2 must be (UNPICK) and flash loader Version 6.XX ( already posted before ) and no NEED ADAPTATOR
If you like to use RX2 find simple modification
===============================================
Checking Framework...Done.
->..pdginterfc.dll version: 1.0.479
->....pdg4fbus.dll version: 1.0.1641
->....pdg4mbus.dll version: 1.0.106
->.....pdg4fls.dll version: 1.0.1164
->....pdg4flsc.dll version: 1.0.0.58
->pdgphonebook.dll version: 1.0.189
->.bb5usbflash.dll version: 1.0.0.42
Reading USB device...Done.
->SN: 10xxx, HW: 10.08, Build: 03.10.01.26
->Extended Info not available.
Testing Interfaces...
->FBUS UART...Supported.
->MBUS UART...Supported.
->Flash Bus...Supported.
Testing Directories...
->DCT4 Loaders Dir('Flash')......Found.
-->114 file(s) found.
-->Loaders version: v. 6.50.053 for RD&A
->ADSP Loaders Dir('FlashUsb')...Found.
-->10 file(s) found.
->DCT3 Loaders Dir('fls1sup')....Found.
-->0 file(s) found.
-->Please copy the loaders first!
->Products Dir('products').......Found.
================================
===N O K I A 6630 TESTED BY MODIFICATION

Flashing RM1_6.050340_B4.C0R ...
Booting Phone...
APE ASIC ID:17100701
APE ASIC MODE:00
APE PUBLIC ID

9ED19DED5CF658F0D1C8889502C...
APE HASH:2C05369F57CC3C4CF9E783E83D9B...
APE ROM ID:AB5E4ADB27A06946
RAP3 ASIC ID:000000010000022600010006000C...
RAP3 EM ASIC ID:00000232
RAP3 EM ASIC ID:00000341
RAP3 PUBLIC ID:0B60011408824F57689A310637D2...
RAP3 ASIC MODE:00
RAP3 HASH:E9EFF4BFAA5393217CA6B17755FC...
RAP3 ROM ID:F28A211FAC901AEE
Sending RAP3 Bootloader...Done.
Sending RAP3 Algorithm...Done.
Sending APE Bootloader...Done.
Sending APE Algorithm...Done.
Reading Keys...Done.
Phones booting completed in 0 min, 10 sec.
Erasing MCU area...Done.
Erasing completed in 0 min, 46 sec.
Flashing MCU area...Done.
Flashing completed in 2 min, 5 sec.
Phone Restarted.
Flashing RM1_6.050340.v01 ...
Booting Phone...
APE ASIC ID:17100701
APE ASIC MODE:00
APE PUBLIC ID

9ED19DED5CF658F0D1C8889502C...
APE HASH:2C05369F57CC3C4CF9E783E83D9B...
APE ROM ID:AB5E4ADB27A06946
RAP3 ASIC ID:000000010000022600010006000C...
RAP3 EM ASIC ID:00000232
RAP3 EM ASIC ID:00000341
RAP3 PUBLIC ID:0B60011408824F57689A310637D2...
RAP3 ASIC MODE:00
RAP3 HASH:E9EFF4BFAA5393217CA6B17755FC...
RAP3 ROM ID:F28A211FAC901AEE
Sending RAP3 Bootloader...Done.
Sending RAP3 Algorithm...Done.
Sending APE Bootloader...Done.
Sending APE Algorithm...Done.
Phones booting completed in 0 min, 9 sec.
Erasing PPM area...Done.
Erasing completed in 0 min, 1 sec.
Flashing PPM area...Done.
Flashing completed in 0 min, 25 sec.
Phone Restarted.
NSS: Flashing complete.
NSS: Total time: 3 min 39 sec.
NSS: *********** AFP ***********
NSS: Scanning product via FBUS...Done.
NSS: Detected: RM-1
NSS: Uploading Product Profile...Skipped.
NSS: Changing mode to Normal.....Done.
NSS: --> AFP complete.
*******************************

bakarioss · 08-02-2007, 22:53

Flashing rm217__05.00.mcusw ...
Booting Phone...
RAP3 ASIC ID:000000010000022600010006010C...
RAP3 EM ASIC ID:00000232
RAP3 EM ASIC ID:00000353
RAP3 PUBLIC ID:2150010855A860564EC0FD9F3DC9...
RAP3 ASIC MODE:00
RAP3 HASH:BAF3A9C3DBFA8454937DB77F2B88...
RAP3 ROM ID:191EC665DFAAF68F
Sending RAP3 Bootloader...Done.
Sending RAP3 Algorithm...Done.
Format Partition...Done.
Reading Keys...Done.
Phones booting completed in 0 min, 20 sec.
Erasing MCU area...Done.
Erasing completed in 1 min, 46 sec.
Flashing MCU area...Done.
Flashing completed in 1 min, 33 sec.
Phone Restarted.
Flashing rm217__05.00.image_mea1 ...
Booting Phone...
RAP3 ASIC ID:000000010000022600010006010C...
RAP3 EM ASIC ID:00000232
RAP3 EM ASIC ID:00000353
RAP3 PUBLIC ID:2150010855A860564EC0FD9F3DC9...
RAP3 ASIC MODE:00
RAP3 HASH:BAF3A9C3DBFA8454937DB77F2B88...
RAP3 ROM ID:191EC665DFAAF68F
Sending RAP3 Bootloader...Done.
Sending RAP3 Algorithm...Done.
Converting to 128k page size...Done.
Phones booting completed in 0 min, 30 sec.
Erasing CP area...Done.
Erasing completed in 1 min, 11 sec.
Flashing CP area...Done.
Flashing completed in 0 min, 16 sec.
Phone Restarted.
Flashing rm217__05.00.ppm_mea1 ...
Booting Phone...
RAP3 ASIC ID:000000010000022600010006010C...
RAP3 EM ASIC ID:00000232
RAP3 EM ASIC ID:00000353
RAP3 PUBLIC ID:2150010855A860564EC0FD9F3DC9...
RAP3 ASIC MODE:00
RAP3 HASH:BAF3A9C3DBFA8454937DB77F2B88...
RAP3 ROM ID:191EC665DFAAF68F
Sending RAP3 Bootloader...Done.
Sending RAP3 Algorithm...Done.
Phones booting completed in 0 min, 7 sec.
Erasing PPM area...Done.
Erasing completed in 0 min, 29 sec.
Flashing PPM area...Done.
Flashing completed in 0 min, 24 sec.
Phone Restarted.
NSS: Flashing complete.
NSS: Total time: 6 min 39 sec.
NSS: *********** AFP ***********
NSS: Scanning product via FBUS...Skipped.
NSS: --> AFP complete.

08-02-2007, 22:22	#14 (permalink)
bakarioss No Life Poster Join Date: Oct 2003 Location: @@Afsus_ tunisia-sat@@ Age: 63 Posts: 1,625 Member: 42750 Status: Offline Thanks Meter: 114	Remark / My Modification not use RX2 must be (UNPICK) and flash loader Version 6.XX ( already posted before ) and no NEED ADAPTATOR If you like to use RX2 find simple modification =============================================== Checking Framework...Done. ->..pdginterfc.dll version: 1.0.479 ->....pdg4fbus.dll version: 1.0.1641 ->....pdg4mbus.dll version: 1.0.106 ->.....pdg4fls.dll version: 1.0.1164 ->....pdg4flsc.dll version: 1.0.0.58 ->pdgphonebook.dll version: 1.0.189 ->.bb5usbflash.dll version: 1.0.0.42 Reading USB device...Done. ->SN: 10xxx, HW: 10.08, Build: 03.10.01.26 ->Extended Info not available. Testing Interfaces... ->FBUS UART...Supported. ->MBUS UART...Supported. ->Flash Bus...Supported. Testing Directories... ->DCT4 Loaders Dir('Flash')......Found. -->114 file(s) found. -->Loaders version: v. 6.50.053 for RD&A ->ADSP Loaders Dir('FlashUsb')...Found. -->10 file(s) found. ->DCT3 Loaders Dir('fls1sup')....Found. -->0 file(s) found. -->Please copy the loaders first! ->Products Dir('products').......Found. ================================ ===N O K I A 6630 TESTED BY MODIFICATION Flashing RM1_6.050340_B4.C0R ... Booting Phone... APE ASIC ID:17100701 APE ASIC MODE:00 APE PUBLIC ID9ED19DED5CF658F0D1C8889502C... APE HASH:2C05369F57CC3C4CF9E783E83D9B... APE ROM ID:AB5E4ADB27A06946 RAP3 ASIC ID:000000010000022600010006000C... RAP3 EM ASIC ID:00000232 RAP3 EM ASIC ID:00000341 RAP3 PUBLIC ID:0B60011408824F57689A310637D2... RAP3 ASIC MODE:00 RAP3 HASH:E9EFF4BFAA5393217CA6B17755FC... RAP3 ROM ID:F28A211FAC901AEE Sending RAP3 Bootloader...Done. Sending RAP3 Algorithm...Done. Sending APE Bootloader...Done. Sending APE Algorithm...Done. Reading Keys...Done. Phones booting completed in 0 min, 10 sec. Erasing MCU area...Done. Erasing completed in 0 min, 46 sec. Flashing MCU area...Done. Flashing completed in 2 min, 5 sec. Phone Restarted. Flashing RM1_6.050340.v01 ... Booting Phone... APE ASIC ID:17100701 APE ASIC MODE:00 APE PUBLIC ID9ED19DED5CF658F0D1C8889502C... APE HASH:2C05369F57CC3C4CF9E783E83D9B... APE ROM ID:AB5E4ADB27A06946 RAP3 ASIC ID:000000010000022600010006000C... RAP3 EM ASIC ID:00000232 RAP3 EM ASIC ID:00000341 RAP3 PUBLIC ID:0B60011408824F57689A310637D2... RAP3 ASIC MODE:00 RAP3 HASH:E9EFF4BFAA5393217CA6B17755FC... RAP3 ROM ID:F28A211FAC901AEE Sending RAP3 Bootloader...Done. Sending RAP3 Algorithm...Done. Sending APE Bootloader...Done. Sending APE Algorithm...Done. Phones booting completed in 0 min, 9 sec. Erasing PPM area...Done. Erasing completed in 0 min, 1 sec. Flashing PPM area...Done. Flashing completed in 0 min, 25 sec. Phone Restarted. NSS: Flashing complete. NSS: Total time: 3 min 39 sec. NSS: ********* AFP ******* NSS: Scanning product via FBUS...Done. NSS: Detected: RM-1 NSS: Uploading Product Profile...Skipped. NSS: Changing mode to Normal.....Done. NSS: --> AFP complete. *****************************

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
mmc tab gone ,no more support for mmc unlock for 136exe ?	mccm	MT-BOX	3	09-25-2010 23:59
No More Waiting For Servers To Come Back - Motorola Codes Here	gsmunlocker	Main Sales Section	0	01-28-2004 21:36
No more logs for SP DCT4 unlocking!!!	er2000	Nokia Digital Core Technology 4 ( DCT-4 )	79	07-04-2002 16:12
No more logs for SP DCT4 unlocking!!!	Dejan Kaljevic	Main Sales Section	1	06-27-2002 14:46
No more flashes for A1018, T1x, T28 ?	mr_x4you	Old Ericsson Phones & Sony Phones	6	10-01-2001 18:18

07-18-2007, 21:03	#2 (permalink)
gsmcable Freak Poster Join Date: Nov 2001 Location: ShenZhen of CHINA Age: 52 Posts: 389 Member: 7311 Status: Offline Sonork: 100.105990 Thanks Meter: 12	for TX2? B.R. GSMCABLE

07-19-2007, 08:18	#4 (permalink)
bakarioss No Life Poster Join Date: Oct 2003 Location: @@Afsus_ tunisia-sat@@ Age: 63 Posts: 1,625 Member: 42750 Status: Offline Thanks Meter: 114	I made in my box 3 month Ago

07-19-2007, 09:04	#5 (permalink)
Freestyler2000 No Life Poster Join Date: Dec 2000 Location: UK Posts: 724 Member: 2868 Status: Offline Thanks Meter: 514	Hi, Thanks for suggesting this modification. It smells a bit of a Prodigy 7.02 I have just modified my device and tested flashing 6270. NSS used Phone RX2 line and everything is fine. As a note i would like to add that some cables use VPP on the place of RX2 line. This VPP should be cut inside the battery connector. Otherwise the RX2 line will short the VPP and the phone will not power on. Best regards Daniel

07-19-2007, 09:05	#6 (permalink)
Freestyler2000 No Life Poster Join Date: Dec 2000 Location: UK Posts: 724 Member: 2868 Status: Offline Thanks Meter: 514	And this is the flashing log. Flashing rm56b5003.85.ppm_c ... Booting Phone... RAP3 ASIC ID:000000010000022600010006010C... RAP3 EM ASIC ID:00000232 RAP3 EM ASIC ID:00000352 RAP3 PUBLIC ID:12F001024CB95056DAA448324490... RAP3 ASIC MODE:00 RAP3 HASH:BAF3A9C3DBFA8454937DB77F2B88... RAP3 ROM ID:191EC665DFAAF68F Sending RAP3 Bootloader...Done. Sending RAP3 Algorithm...Done. Phones booting completed in 0 min, 6 sec. Erasing PPM area...Done. Erasing completed in 0 min, 31 sec. Flashing PPM area...Done. Flashing completed in 0 min, 18 sec. Phone Restarted. NSS: Flashing complete. NSS: Total time: 0 min 55 sec. NSS: ********* AFP ********* NSS: Scanning product via FBUS...Done. NSS: Detected: RM-56 NSS: --> AFP complete.

07-19-2007, 09:51	#7 (permalink)
bakarioss No Life Poster Join Date: Oct 2003 Location: @@Afsus_ tunisia-sat@@ Age: 63 Posts: 1,625 Member: 42750 Status: Offline Thanks Meter: 114	Tank you sir for testing , It's nice to support F1 great box for >NOKIA Just one question , Do you have any future Module to add like ..samsung ...or.. AnyWay my setool card work fine Inside the SC , no need any modification.

07-19-2007, 10:11	#8 (permalink)
Vansy Banned Join Date: Sep 2003 Location: Cambodia Posts: 1,522 Member: 39069 Status: Offline Sonork: 100.1606677 Thanks Meter: 190	First I have did this modify but after have RX2 line for use hight bootloader, I need to fix it back.

07-21-2007, 08:20	#11 (permalink)
Freestyler2000 No Life Poster Join Date: Dec 2000 Location: UK Posts: 724 Member: 2868 Status: Offline Thanks Meter: 514	Actually, sorry to disappoint you guys, but this modification is only good for DCT4 without VPP attached pin. We will prepare full diagrams of what needs to be done to modify it. Best regards Daniel

07-21-2007, 10:20	#12 (permalink)
bakarioss No Life Poster Join Date: Oct 2003 Location: @@Afsus_ tunisia-sat@@ Age: 63 Posts: 1,625 Member: 42750 Status: Offline Thanks Meter: 114	About BB5 , Some Model Tested using 7pin Cable =6630 =6680 =N70 =6280 =6131 =N72 that's 100000000% tested by me. Remark : let's make small logical analyse if DCT4 work 100% with this modification and this cable work with other Nokia Tool , so BB5 cable work also with other box (UFS JAFF...) , finalize by logic BB5 7pin cable work with F1 b.r

07-21-2007, 13:58	#13 (permalink)
RNC_EBM No Life Poster Join Date: Dec 2004 Location: PHILIPPINES Posts: 5,294 Member: 101860 Status: Offline Sonork: 100.1582168 100.77603 Thanks Meter: 6,036	FOR RX2 LINE MODIFICATION CHECK IT HERE br RNC_EBM

08-02-2007, 22:53	#15 (permalink)
bakarioss No Life Poster Join Date: Oct 2003 Location: @@Afsus_ tunisia-sat@@ Age: 63 Posts: 1,625 Member: 42750 Status: Offline Thanks Meter: 114	Flashing rm217__05.00.mcusw ... Booting Phone... RAP3 ASIC ID:000000010000022600010006010C... RAP3 EM ASIC ID:00000232 RAP3 EM ASIC ID:00000353 RAP3 PUBLIC ID:2150010855A860564EC0FD9F3DC9... RAP3 ASIC MODE:00 RAP3 HASH:BAF3A9C3DBFA8454937DB77F2B88... RAP3 ROM ID:191EC665DFAAF68F Sending RAP3 Bootloader...Done. Sending RAP3 Algorithm...Done. Format Partition...Done. Reading Keys...Done. Phones booting completed in 0 min, 20 sec. Erasing MCU area...Done. Erasing completed in 1 min, 46 sec. Flashing MCU area...Done. Flashing completed in 1 min, 33 sec. Phone Restarted. Flashing rm217__05.00.image_mea1 ... Booting Phone... RAP3 ASIC ID:000000010000022600010006010C... RAP3 EM ASIC ID:00000232 RAP3 EM ASIC ID:00000353 RAP3 PUBLIC ID:2150010855A860564EC0FD9F3DC9... RAP3 ASIC MODE:00 RAP3 HASH:BAF3A9C3DBFA8454937DB77F2B88... RAP3 ROM ID:191EC665DFAAF68F Sending RAP3 Bootloader...Done. Sending RAP3 Algorithm...Done. Converting to 128k page size...Done. Phones booting completed in 0 min, 30 sec. Erasing CP area...Done. Erasing completed in 1 min, 11 sec. Flashing CP area...Done. Flashing completed in 0 min, 16 sec. Phone Restarted. Flashing rm217__05.00.ppm_mea1 ... Booting Phone... RAP3 ASIC ID:000000010000022600010006010C... RAP3 EM ASIC ID:00000232 RAP3 EM ASIC ID:00000353 RAP3 PUBLIC ID:2150010855A860564EC0FD9F3DC9... RAP3 ASIC MODE:00 RAP3 HASH:BAF3A9C3DBFA8454937DB77F2B88... RAP3 ROM ID:191EC665DFAAF68F Sending RAP3 Bootloader...Done. Sending RAP3 Algorithm...Done. Phones booting completed in 0 min, 7 sec. Erasing PPM area...Done. Erasing completed in 0 min, 29 sec. Flashing PPM area...Done. Flashing completed in 0 min, 24 sec. Phone Restarted. NSS: Flashing complete. NSS: Total time: 6 min 39 sec. NSS: ********* AFP ********* NSS: Scanning product via FBUS...Skipped. NSS: --> AFP complete.