Prodigy 1.1328 Poll please vote and give feedback

[bluelights]

hi

this is a poll to see customer views on the latest release from us :-

this poll is ONLY for the following Prodigy Version :-

Software : 1.1328
Device Firmaware : 2.40

do you think is better than previous, worse, not much better.

feedback is very valuble to us.

Br
Prodigy Team

[locom]

hi
i voted for average cause with this version it appeared some problems that with older version never appeared for example the problems when flashing phones.

BR
locom

[evan_silbert]

I voted for average since it wouldn't detect a 6820b in Local Mode... Could not unlock this phone after scan phone or after restart prodigy.

I was able to do it with the same cable and another box...

I always try my Prodigy first but this version made me go back...

[Prima]

I till now use 1010. I cannot instal and try a new software because was not present UEM Tools for 1328.
Where author UEM tools ? It alive ?

@bluelights

Can in future clean(remove) versions Prodigy protection for UEM tools.?
That worked old UEM tools.

[NeoZero26]

I voted worse because since the new update I can't flash nothing!!!!

I tested in 5 pcs and nothing, I'm really angry now, I use now my old griffin, but I think that Prodigy is so much better, but if I can't flash nothing with the prodigy now that's mean that this last update is the worse ever.

I need a solution because my prodigy is now like a piece of trash, not serving for nothing. The device is detected so I have no problem with the device detection.

I hope that in the next update u can help me and other customers to fix all their problem with their boxes.

Keep the good work and good luck. Regards

[hakima]

I voted for average coz I totally agree with @Prima!!!
Really need new UEM tool
WBR

[bluelights]

Originally Posted by NeoZero26

I voted worse because since the new update I can't flash nothing!!!!

I tested in 5 pcs and nothing, I'm really angry now, I use now my old griffin, but I think that Prodigy is so much better, but if I can't flash nothing with the prodigy now that's mean that this last update is the worse ever.

I need a solution because my prodigy is now like a piece of trash, not serving for nothing. The device is detected so I have no problem with the device detection.

I hope that in the next update u can help me and other customers to fix all their problem with their boxes.

Keep the good work and good luck. Regards

if you have griffin or any other flasher on your pc the FIA's will get messed up this is why you cannot flash, also check the post about the LPT settings and make sure your BIOS is setup correctly for Prodigy. but the reason u cant flash is for sure 99.9% FIA Related, you need to install the original nokia FLash update 3.13 and remove all others

[bluelights]

guys about the uem tools

have u tested the new GUI by i-mobile for prodigy ???? im not 100% but i beleive uem tools is built into it.

go and grab it from the prodigy forum under the SDK community section

br

[NeoZero26]

Originally Posted by bluelights

if you have griffin or any other flasher on your pc the FIA's will get messed up this is why you cannot flash, also check the post about the LPT settings and make sure your BIOS is setup correctly for Prodigy. but the reason u cant flash is for sure 99.9% FIA Related, you need to install the original nokia FLash update 3.13 and remove all others

Hi Bluelights;

I have tried in a brand new pc, installed the fia 3.13 and still can't flash, I don't know what I can do more than that.

But no problem, I will see if I can buy another box because I like Prodigy too much, and I think that is the best box for the nokia by far

Cheers

[garmani]

I voted for better of course. UEM tools is out? Really good news...

[ricson]

average also scared of using prodigy for now when flashing dct4 phones always when writing mcu error appear bootcore error.

what could be the solution for type of error.

[bluelights]

Originally Posted by NeoZero26

Hi Bluelights;

I have tried in a brand new pc, installed the fia 3.13 and still can't flash, I don't know what I can do more than that.

But no problem, I will see if I can buy another box because I like Prodigy too much, and I think that is the best box for the nokia by far

Cheers

hi

can you give the specs of your pc ? also can u confirm the settings in your system BIOS for the LPT settings, check this post and make sure

http://forum.gsmhosting.com/vbb/showthread.php?t=162861

br

[Prima]

OK its work 1328 ! not stable .!
read ask and backup rpl 3100 = ok
read ask and backup rpl 1100 = not ok backup RPL not work.
read self test 3100 = ok
read self test 1100 = not work.

[NeoZero26]

Originally Posted by bluelights

hi

can you give the specs of your pc ? also can u confirm the settings in your system BIOS for the LPT settings, check this post and make sure

http://forum.gsmhosting.com/vbb/showthread.php?t=162861

br

Yes I confirm the setting in the bios. The pc that I have, actually I have 2.

The first: AMD 3000+, RAM 512 DDR, HD 160Go, Motherboard Gygabite.
The other: AMD800, RAM 256 SDR, HD 40, Motherboard Asus.

I'm sure of one thing, before the last update, my prodigy box was working perfectly, but before I can't flash nothing, that's the true. I really tested all that I have read in this forum. Now I will test the SDK soft, and I will see if it work for me or not. Like I said before I have no problem with the box detection, the box is detected perfectly...

I will test and tell u more. See ya

[GSMsell]

"cannot perform authentication..." with new v. in some models