News from Ufsxsupport.com

[gsm_search]

Originally Posted by john_john

[email protected]
pass______ 40001

Site: www.u-box.org U can download many Latest Files from Here!

please........

[GsmMunna]

Originally Posted by miandad

i have problem 1110 flashing 4.04
does any one know what problem is that

st Boot Ok, DCT4, UPP: 2201
Fl0: 0x01000000-0x01FFFFFF,00EC2268,Sam No Name
Algorithm: u_amd.fia, Ver: 4.49.0
Algorithm Ok, MSID: 8488DBA91D7D1D8C39911B1CFB
Decoded MSID: 3E4EBAE9-00007BBF-A9000000
Encoded FAID: 220EA955-8815959D-38B0B318
Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00
Area2: 0x01010000-0x013BFFFF Erased, Time: 00:27
Area3: 0x013C0000-0x013EFFFF Erased, Time: 00:01
Erasing: 0x017C0000-0x017EFFFF ...
Erasing Error: 10, at: 0x017C0000-0x017DFFFF, 940207, Time: 00:00
Process Failed, Repowering Mobile



thx

Cheal Your Flash Ic
Fl0: 0x01000000-0x01FFFFFF,00EC2268,Sam No Name( Flash ID Not There..)

Solution

Rehot Your Flash Ic or Change (May Be Damage) an Flash Phone Again...


WBR
GSMMUNNA

[miandad]

Originally Posted by GSMMUNNA

Cheal Your Flash Ic
Fl0: 0x01000000-0x01FFFFFF,00EC2268,Sam No Name( Flash ID Not There..)

Solution

Rehot Your Flash Ic or Change (May Be Damage) an Flash Phone Again...


WBR
GSMMUNNA

thx gsmmunna but i flash new mobile set for change the language....i flash 4 of them now all are deads

[KPbICMAH]

Originally Posted by miandad

thx gsmmunna but i flash new mobile set for change the language....i flash 4 of them now all are deads

If you want to change language, you don't have to flash MCU, it is enough to flash just the PPM with your language for the firmware in your phone. Now, what should I suggest to you?

First, what is the version of UFS_DCTx software you are using? If it is old, try to update it to version 1.4e or download the UFS HWK suite 3.01.

Second, if you are familiar with any HEX editor, try to open the MCU file, find the sequence 017C 0000 017E FFFF in the beginning of the file and change it to 0200 0000 02FF FFFF - I think your DCTx software does not recognize flash ID properly and tries to erase what is actually out of bounds.

[tpmarcus]

thank guys for the update thats the way foward

[miandad]

Originally Posted by KPbICMAH

If you want to change language, you don't have to flash MCU, it is enough to flash just the PPM with your language for the firmware in your phone. Now, what should I suggest to you?

First, what is the version of UFS_DCTx software you are using? If it is old, try to update it to version 1.4e or download the UFS HWK suite 3.01.

Second, if you are familiar with any HEX editor, try to open the MCU file, find the sequence 017C 0000 017E FFFF in the beginning of the file and change it to 0200 0000 02FF FFFF - I think your DCTx software does not recognize flash ID properly and tries to erase what is actually out of bounds.

i try with dctx1.4e.. but no solution/ i thing this problem with FIA. my FIA version is 4.49 .. any 1 complete flash 1110. plz give me a pure solution to flash 1110..

thx for response KPbICMAH

i m waiting..............

[miandad]

Originally Posted by KPbICMAH

If you want to change language, you don't have to flash MCU, it is enough to flash just the PPM with your language for the firmware in your phone. Now, what should I suggest to you?

First, what is the version of UFS_DCTx software you are using? If it is old, try to update it to version 1.4e or download the UFS HWK suite 3.01.

Second, if you are familiar with any HEX editor, try to open the MCU file, find the sequence 017C 0000 017E FFFF in the beginning of the file and change it to 0200 0000 02FF FFFF - I think your DCTx software does not recognize flash ID properly and tries to erase what is actually out of bounds.

i try with 1.4e but problem is still here.. i thing this problem with FIA. My FIA version 4.49 and 1110 v.4.04.... does any 1 complete flash 1110.. plz give me a solution what i do with 1110 flash....

thx KPbICMAH
i m waiting..........

[KPbICMAH]

I have the same DCTx version and same FIA version and I flashed several 1110 and didn't have a problem. It looks like your phone has a new flash, which is detected properly (00EC2268), but is not known to DCTx software (Sam No Name). Thus your software assumes it is a 16 Meg flash (Fl0: 0x01000000-0x01FFFFFF), when in fact it is only 4 Megs (0x013C0000-0x013EFFFF erases successfully, but 0x017C0000-0x017EFFFF does not). So, I have patched the MCU for you and uploaded to rapidshare.

Now, download the patched MCU. Flash the phone using this MCU and whatever PPM you need. PPM does not need patching. This should help. Just let me know the results, so I can sleep well.

[miandad]

thx KPbICMAH... but its not working yet after flash there is nothing.... its not going local or test modes.... its mean its dead....

thx KPbICMAH for helping me i m trying next method may be its work...... if u find some thing plz tell me

[KPbICMAH]

Originally Posted by miandad

thx KPbICMAH... if u find some thing plz tell me

An update: Yesterday I also got a 1110 with this flash ID. After some playing around and checking info on the 'net, here is what you should do:

1. Firmware 4.04 will kill the phone. Find a later version (I have 5.03; can share it if you let me know what language pack you need).
2. Install UFS Suite v3.01, which works correctly with this flash version. If you cannot find it (in my case it didn't work), select "Skip erase from area: 4" in the older versions - that is an alternative to patching the MCU file to avoid attempting to erase non-existent flash areas.
3. Flash your phone with the latest version of MCU, PPM and CNT, using the "Skip erase" trick or the latest version of DCTx software.
4. Pray it doesn't say CONTACT SERVICE afterwards.

If the phone starts Ok from the box, but shows CS with the battery, we are in deep sh#t. UFS doesn't seem to have a solution to this (yet). Consider yourself lucky if you have someone with MT-box or JAF or Griffin. I am not so lucky.

[miandad]

good nexhat... thx
do u flash it with 5.03..if its success flash plz upload mcu+ia language packeg .... i try skip erase area 4 but it did not work..... plz upload 5.03 lanuage ia thx....

[KPbICMAH]

MCU, PPM and content (ia) uploaded to http://rapidshare.de/files/29696386/1110ia503.zip.html. Don't forget to select Skip Erase: 4 when flashing.

[miandad]

thankx KPbICMAH v503 is working on 1110 ........

[farrukhayub]

Hello to all
i have searched the forum but not satisfied about w600i unlocking with hwk,Although i can't mark w600i in KZF but i tried to select the w550i to unlock for sim restriction,by doing so my set get dead,and more over i have flashed it with w550i mcu,but still cant power on,and onUFSXHWK there is none of w600i files.
So plz reply wat to do know to awake w600i
thanx

[gsm_search]

Just U go to www.u-box.org & Download the Files

User: [email protected] ; Pass:40001