****PATCHING IMEI JST USING YOUR UFS here!!! - GSM-Forum

ryumahon · 08-01-2005, 17:44

this is what ive learned in our local gsm forum....

all you only need is UFS and GRIFFIN

1. download all imei patches of JAF
2. flash the phone with mcu and ppm with its correct version (ex.. 8310 v6.20)
3. now put NHM-7V06.20.fia in ppm
4. flash it without MCU..
5. check info... you will notice that imei will be ---
*** if you insert a sim card it wont accept any. phone restricted will appear
6. ufs can't unlock this phone so its time for the griffin box to do the unlocking...

after that check it out!!! you now have a phone with an invisible imei!!!

hehehe!! tried and tested with 1unit 8310...

if you check *#06# you cant see the imei... now even the network provider cant blocked your phone..

i hope somebody can try this and check if the phone will work 100%...

enjoy!

The Repair Shop · 08-01-2005, 17:48

but if the nework can not "see" your imei, how does the network even know the phone is on?

ryumahon · 08-01-2005, 17:50

try it mate before you ask.... the phone will still get signal...

kenichi · 08-01-2005, 18:40

test mobile with a wavetek..... and told us with IMEI is sent to net.

hitibiti · 08-01-2005, 19:04

sory
tested don't worck

Alim Hape · 08-01-2005, 19:14

Quote:

Originally Posted by ryumahon

this is what ive learned in our local gsm forum....

all you only need is UFS and GRIFFIN

1. download all imei patches of JAF
2. flash the phone with mcu and ppm with its correct version (ex.. 8310 v6.20)
3. now put NHM-7V06.20.fia in ppm
4. flash it without MCU..
5. check info... you will notice that imei will be ---
*** if you insert a sim card it wont accept any. phone restricted will appear
6. ufs can't unlock this phone so its time for the griffin box to do the unlocking...

after that check it out!!! you now have a phone with an invisible imei!!!

hehehe!! tried and tested with 1unit 8310...

if you check *#06# you cant see the imei... now even the network provider cant blocked your phone..

i hope somebody can try this and check if the phone will work 100%...

enjoy!

are u drunk???
imei show is only bypassed by this procedure...
the original IMEI is still there but hidden from phone!
so...network can still SEE imei & BLOCK ur phone!!!

br,

rico_deep · 08-02-2005, 03:25

correct me if i'm wrong, using griffin it only see ESN# not IMEI#, i've tried it on 6310,6310i,3530,6510 and 8310..All phones work fine without *#06#IMEI...is it posible that this phones registered to network as a CDMA phones. cos CDMA phones have ESN#

karwos · 08-02-2005, 08:20

Sure, it NOT will work in way which u presented

Some peoples have solution for it, some not

QADRI MOBILE · 08-02-2005, 08:33

This is a great treak if it's working.Let us try then post the result.

B,r.

hornet-bad · 08-03-2005, 01:16

ummm
why not am gona try it

cyahus2k · 08-03-2005, 06:34

and post also the patches

ryumahon · 08-03-2005, 08:04

sample patch here!!! one at a time only...

http://rapidshare.de/files/3603106/NHM-7V06.20.fia.html <------- 8310 patch

ryumahon · 08-03-2005, 08:18

Quote:

Originally Posted by DMD

@ ryumahon

All JAF patches are freely available so whats up with your "one time only patch" and JAF at 99euro is it really worth the effort?

D.

so what is it with you??? since you said its free.. why dont you post here instead so that everybody here will thank you!!!

99euro for you is nothing but for some its already expensive... if you think this is worthless then dont read and jst shut your ***** up.

DMD · 08-03-2005, 10:56

@ ryumahon

*** open your eyes is posted on this very forum, yes this one!

Patch away Doos

rico_deep · 08-03-2005, 12:10

first phone has IMEI....

Phone data:
V 05.35/17-08-04/RH-9/(c) NMP.
IMEI 010144508130055
Product Code 0509406
MCU Version V 05.35/17-08-04/RH-9/(c) NMP.
HW Version 1224
UEM Version 8
UPP Version 4384

Then Flashing PPM only with Jaf pacth (fia)......

Initializing Phone...
Flash configuration:
9F02010001257E000200401000020000...
Boot and Flash loaders operation took 4.773000 seconds
Erasing - erase took 1.256000 seconds
Flashing PPM - flashing took 0.776000 seconds
Flashing DONE
After flash processing...
Trying autopower

After flashing.....

Phone data:
V 05.35/17-08-04/RH-9/(c) NMP.
ESN 07214330127
Product Code 0509406
MCU Version V 05.35/17-08-04/RH-9/(c) NMP.
HW Version 1224
UEM Version 8
UPP Version 4384

Instead of IMEI, it's ESN#...ESN 07214330127

unlock it with Griffin...anybody knows ESN stand for??????.

08-01-2005, 17:44	#1 (permalink)
ryumahon No Life Poster Join Date: Apr 2001 Location: Sun Age: 44 Posts: 2,773 Member: 4021 Status: Offline Thanks Meter: 782	**PATCHING IMEI JST USING YOUR UFS here!!! this is what ive learned in our local gsm forum.... all you only need is UFS and GRIFFIN 1. download all imei patches of JAF 2. flash the phone with mcu and ppm with its correct version (ex.. 8310 v6.20) 3. now put NHM-7V06.20.fia in ppm 4. flash it without MCU.. 5. check info... you will notice that imei will be --- * if you insert a sim card it wont accept any. phone restricted will appear 6. ufs can't unlock this phone so its time for the griffin box to do the unlocking... after that check it out!!! you now have a phone with an invisible imei!!! hehehe!! tried and tested with 1unit 8310... if you check *#06# you cant see the imei... now even the network provider cant blocked your phone.. i hope somebody can try this and check if the phone will work 100%... enjoy!

08-03-2005, 10:56	#14 (permalink)
DMD No Life Poster Join Date: Jun 2002 Location: CTSA Age: 46 Posts: 2,194 Member: 12660 Status: Offline Thanks Meter: 7	@ ryumahon *** open your eyes is posted on this very forum, yes this one! Patch away Doos Last edited by Narry; 08-03-2005 at 12:14. Reason: this is ufs3 tornado section

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Use your original ufs-3+hwk box acting as jaf [100%]	amit123	Nokia Hardware & Hardware Repair	6	07-30-2009 10:05
use sonic semctool v1.228 with your ufs	sunnyboy	Sony Ericsson	62	02-12-2006 18:09
Don't use Ufs2_v25.fbi file to update your UFS Box!!!	ufs2flasher	UFS2 + UFS3-Tornadoflasher	17	09-11-2005 21:18
The great exchange of USED phone's value in your country here!	qwe7410	Off Topic Zone	3	01-30-2003 17:50

08-01-2005, 17:48	#2 (permalink)
The Repair Shop No Life Poster Join Date: Feb 2003 Location: In My Pub Posts: 5,828 Member: 307549 Status: Offline Thanks Meter: 188	but if the nework can not "see" your imei, how does the network even know the phone is on?

08-01-2005, 17:50	#3 (permalink)
ryumahon No Life Poster Join Date: Apr 2001 Location: Sun Age: 44 Posts: 2,773 Member: 4021 Status: Offline Thanks Meter: 782	try it mate before you ask.... the phone will still get signal...

08-01-2005, 18:40	#4 (permalink)
kenichi No Life Poster Join Date: Aug 2001 Location: Madrid (from here to heaven) Age: 42 Posts: 811 Member: 6084 Status: Offline Thanks Meter: 4	test mobile with a wavetek..... and told us with IMEI is sent to net.

08-01-2005, 19:04	#5 (permalink)
hitibiti No Life Poster Join Date: Mar 2003 Location: Canada Age: 44 Posts: 8,146 Member: 24023 Status: Offline Sonork: 100.61317 Thanks Meter: 2,630	sory tested don't worck

08-02-2005, 03:25	#7 (permalink)
rico_deep No Life Poster Join Date: Jul 2005 Location: philippine Posts: 1,113 Member: 159757 Status: Offline Thanks Meter: 461	correct me if i'm wrong, using griffin it only see ESN# not IMEI#, i've tried it on 6310,6310i,3530,6510 and 8310..All phones work fine without *#06#IMEI...is it posible that this phones registered to network as a CDMA phones. cos CDMA phones have ESN#

08-02-2005, 08:20	#8 (permalink)
karwos No Life Poster Join Date: Feb 2005 Location: Poland Age: 34 Posts: 4,943 Member: 117496 Status: Offline Sonork: 100.83919 Thanks Meter: 22,689	Sure, it NOT will work in way which u presented Some peoples have solution for it, some not

08-02-2005, 08:33	#9 (permalink)
QADRI MOBILE Freak Poster Join Date: Mar 2005 Location: P A K I S T A N Posts: 445 Member: 127985 Status: Offline Sonork: 100.109417 Thanks Meter: 38	This is a great treak if it's working.Let us try then post the result. B,r.

08-03-2005, 01:16	#10 (permalink)
hornet-bad Freak Poster Join Date: Dec 2004 Age: 51 Posts: 103 Member: 95127 Status: Offline Thanks Meter: 3	ummm why not am gona try it

08-03-2005, 06:34	#11 (permalink)
cyahus2k Freak Poster Join Date: Dec 2003 Location: Singapore Age: 47 Posts: 110 Member: 45377 Status: Offline Thanks Meter: 1	and post also the patches

08-03-2005, 08:04	#12 (permalink)
ryumahon No Life Poster Join Date: Apr 2001 Location: Sun Age: 44 Posts: 2,773 Member: 4021 Status: Offline Thanks Meter: 782	sample patch here!!! one at a time only... http://rapidshare.de/files/3603106/NHM-7V06.20.fia.html <------- 8310 patch

08-03-2005, 12:10	#15 (permalink)
rico_deep No Life Poster Join Date: Jul 2005 Location: philippine Posts: 1,113 Member: 159757 Status: Offline Thanks Meter: 461	first phone has IMEI.... Phone data: V 05.35/17-08-04/RH-9/(c) NMP. IMEI 010144508130055 Product Code 0509406 MCU Version V 05.35/17-08-04/RH-9/(c) NMP. HW Version 1224 UEM Version 8 UPP Version 4384 Then Flashing PPM only with Jaf pacth (fia)...... Initializing Phone... Flash configuration: 9F02010001257E000200401000020000... Boot and Flash loaders operation took 4.773000 seconds Erasing - erase took 1.256000 seconds Flashing PPM - flashing took 0.776000 seconds Flashing DONE After flash processing... Trying autopower After flashing..... Phone data: V 05.35/17-08-04/RH-9/(c) NMP. ESN 07214330127 Product Code 0509406 MCU Version V 05.35/17-08-04/RH-9/(c) NMP. HW Version 1224 UEM Version 8 UPP Version 4384 Instead of IMEI, it's ESN#...ESN 07214330127 unlock it with Griffin...anybody knows ESN stand for??????.