T630 "band Locked" Solution.

[hooi76]

Hi Mr pawaa, can u riiipp the R7A011_CHINA_2 too. I'mm looking for that file

[hooi76]

i flash again and the phone now got signal, but i can not hear other party speakes and other party can't hear me too. there is no ring sound when i browse the ring tone menu (SETTING > SOUND AND ALERTS > RING SIGNAL.)

I lost my original SA when after finish click the RSA button, i mistakenly removed the battery.and there is no backup
and when i click the RSA it shows

Mcu_Id: 5B 08 02 01 FF FF FF FF
Certificate Error 2: 46 32 AA 01
Certificate Rejected: 46 32 AA 01
Certificated Boot Failed, 00:07

Please Connect Cable to Switched-Off Mobile
Mcu_Id: 5B 08 02 01 FF FF FF FF
Secure Boot Ok, Time: 00:14
Fl_Id : 00898864 Intel 28F640W18T {2}
Blk_0 : 800000
IMEI : 354527-00-601291-2
ULock : Factory_Off : 0000
***** : "New" GDFS SA Layout, Cannot Calculate Codes
LockSt: Sim_Locks Open, Mcc+Mnc: FFF-FF, 5555 55
Mcu_Sw: K[IprgCXC;QOk~k5G"
BackUp:'T630_354527006012912_uns_14_Apr_05_03_07_0 8_AM.sim'
Blk0: 800000
GDFS Flash Erased: 1 sector(s), Time: 00:00
GDFS Flash Written: 53248 byte(s), Time: 00:01
GDFS Security Area Restore Done, Time: 00:03
OTP IMEI: 30-354527-00-601291-2, Locked
Old IMEI: 354527-00-601291-2
"New" Security Area Layout Detected
New IMEI: 354527-00-601291-2
GDFS Flash Erased: 1 sector(s), Time: 00:00
GDFS Flash Written: 24576 byte(s), Time: 00:00
GDFS Security Block Init Done, Time: 00:09

[pawaa]

Originally Posted by hooi76

i flash again and the phone now got signal, but i can not hear other party speakes and other party can't hear me too. there is no ring sound when i browse the ring tone menu (SETTING > SOUND AND ALERTS > RING SIGNAL.)

I lost my original SA when after finish click the RSA button, i mistakenly removed the battery.and there is no backup
and when i click the RSA it shows

Mcu_Id: 5B 08 02 01 FF FF FF FF
Certificate Error 2: 46 32 AA 01
Certificate Rejected: 46 32 AA 01
Certificated Boot Failed, 00:07

Please Connect Cable to Switched-Off Mobile
Mcu_Id: 5B 08 02 01 FF FF FF FF
Secure Boot Ok, Time: 00:14
Fl_Id : 00898864 Intel 28F640W18T {2}
Blk_0 : 800000
IMEI : 354527-00-601291-2
ULock : Factory_Off : 0000
***** : "New" GDFS SA Layout, Cannot Calculate Codes
LockSt: Sim_Locks Open, Mcc+Mnc: FFF-FF, 5555 55
Mcu_Sw: K[IprgCXC;QOk~k5G"
BackUp:'T630_354527006012912_uns_14_Apr_05_03_07_0 8_AM.sim'
Blk0: 800000
GDFS Flash Erased: 1 sector(s), Time: 00:00
GDFS Flash Written: 53248 byte(s), Time: 00:01
GDFS Security Area Restore Done, Time: 00:03
OTP IMEI: 30-354527-00-601291-2, Locked
Old IMEI: 354527-00-601291-2
"New" Security Area Layout Detected
New IMEI: 354527-00-601291-2
GDFS Flash Erased: 1 sector(s), Time: 00:00
GDFS Flash Written: 24576 byte(s), Time: 00:00
GDFS Security Block Init Done, Time: 00:09

Don't you worry My Friend,

Want to see some magic ? ok put the same MCU in GDFS and click flash GDFS and "init Secblk" and every thing will be ok again, and if your BT or Camera is having some problem flash Given Modem file. play around the GUI all functions are to be used according to the their functionalities...

[PaWaa]

[pawaa]

Ok Guys, For Greek And Turkish Friends I Would Like To Present T630_R8C005_EMEA3 .

[PaWaa]

[Fronius]

Originally Posted by pawaa

Ok Guys, For Greek And Turkish Friends I Would Like To Present T630_R8C005_EMEA3 .

[PaWaa]

Can we get EMEA2, please?

Regards

[hooi76]

Hi Mr pawaa, can you rip the R7A011_CHINA_2 for me.

Thanks In Advance.

After flashing all the procedures mentioned, my phone still can not hear from other party voice and other party can only hear my voice very very very very very very soft although i shout.

And when i browse the ring tone menu at SETTINGS > SOUNDS AND ALERT > RING SIGNAL there is no sound. But when people call in, there is ringing sound.

[Genius]

Use simple solution and dont ask for ripped MCU or other stuff...

If U have DIV LPT U can unlock/flash/repair all T630 R7A011 and higher versions

1. Download main flash R7Axxx, R8Cxxx for DIV (*.sbn)
also download modem file same version
2. Remove RSA if active
3. Make Backup GDFS
4. Write Flash ( main & modem )
5. Afther flash, restore backup of GDFS
6. Rebuild SP Area using OTP imei

Enjoy,

But remmember if phone is R7Axxx or higher, U cant download it to lower version coz hardware difference, always use current version or higher...

U can also repair all phones even if u dont have backup of original phone.
Just use any other GDFS backup from another phone, IMEI will be changed
but only for short time, press Rebuild SP Area using OTP IMEI and your original
IMEI will be restored...

Same this solution work's also with UFS box, and here is even easier coz U
dont need to read backup of phone, software read it on a first booting...



For UFS if u have first connected phone to this device, U have original
SA area stored in your Backup directory and afther all above mentioned
use option " RESTORE SA ", afther that press " Init Sec Block ".
U have unlocked and working phone.



That's all...

[pawaa]

Originally Posted by Genius

Use simple solution and dont ask for ripped MCU or other stuff...

If U have DIV LPT U can unlock/flash/repair all T630 R7A011 and higher versions

1. Download main flash R7Axxx, R8Cxxx for DIV (*.sbn)
also download modem file same version
2. Remove RSA if active
3. Make Backup GDFS
4. Write Flash ( main & modem )
5. Afther flash, restore backup of GDFS
6. Rebuild SP Area using OTP imei

Enjoy,

But remmember if phone is R7Axxx or higher, U cant download it to lower version coz hardware difference, always use current version or higher...

U can also repair all phones even if u dont have backup of original phone.
Just use any other GDFS backup from another phone, IMEI will be changed
but only for short time, press Rebuild SP Area using OTP IMEI and your original
IMEI will be restored...

Same this solution work's also with UFS box, and here is even easier coz U
dont need to read backup of phone, software read it on a first booting...



For UFS if u have first connected phone to this device, U have original
SA area stored in your Backup directory and afther all above mentioned
use option " RESTORE SA ", afther that press " Init Sec Block ".
U have unlocked and working phone.

That's all...

Clapps..... Give him a big hand with both thumbs up,

Mr. Genius, Sorry but this thread was started to help the guys who don't have anyother hardware or software solution other then UFS/Twister/N-Box and thanks for your debate, now i am out of it...

Guys now Mr. Genius Will Provide You The Flashes You Was Requesting For UFS.

[PaWaa]

[Genius]

Originally Posted by pawaa

Clapps..... Give him a big hand with both thumbs up,

Mr. Genius, Sorry but this thread was started to help the guys who don't have anyother hardware or software solution other then UFS/Twister/N-Box and thanks for your debate, now i am out of it...

Guys now Mr. Genius Will Provide You The Flashes You Was Requesting For UFS.

[PaWaa]

Yes, U have help many of them...
But some of them now have pb with bluetoth, camere etc...
There will be very soon update for UFS regarding this problem so all of
them will solve their problem easy.

I will not provide any flash file for any of these SW, and also I will not argue
with U about nothing.

My point was to all members who facing this problem, to searc for " GOOD "
flash files and continue doing quality unlock.

Sorry if U missunderstud me!

B.R
GeniuSShadoW

[hooi76]

Please provide R7A011 GDFS file too since there is a hardware changes

[pawaa]

Originally Posted by Genius

Yes, U have help many of them...
But some of them now have pb with bluetoth, camere etc...
There will be very soon update for UFS regarding this problem so all of
them will solve their problem easy.

I will not provide any flash file for any of these SW, and also I will not argue
with U about nothing.

My point was to all members who facing this problem, to searc for " GOOD "
flash files and continue doing quality unlock.

Sorry if U missunderstud me!

B.R
GeniuSShadoW

Dear Genius,

Well, That BT and camera problem was fixed because modem flash was also provided, but thanks for jumping into a running thread to lend me a helping hand to help more ppl ...

I'll Try To Provide Requested Firmware Packages To Help My Forum Fellows According To My Poor Knowladge And Skill...

[PaWaa]

[pawaa]

Originally Posted by hooi76

Please provide R7A011 GDFS file too since there is a hardware changes

You can use the same 12 MB MCU as GDFS also, Because it als contains GDFS in it, but don't forget to uncheck "protect SA....." check box.

[PaWaa]

[Fronius]

Mr pawaa, can you, please, provide T630 EMEA2 file.
Thanx alot.

Pegards

[pawaa]

Originally Posted by Fronius

Mr pawaa, can you, please, provide T630 EMEA2 file.
Thanx alot.

Pegards

As many of my fellows are requesting for EMEA2, so now EMEA2 has a very high preority and my next post will contain EMEA2 FLASH (INSH*****)...

[PaWaa]

[Fronius]

Originally Posted by pawaa

As many of my fellows are requesting for EMEA2, so now EMEA2 has a very high preority and my next post will contain EMEA2 FLASH (INSH*****)...

[PaWaa]

Thanx, mate. I dont know what else can I say.

Regards