Is it possile to reprogram/flash Siemens Gigaset 3015 DECT base? - GSM-Forum

chris_ua · 02-15-2004, 21:39

Hi!

Is it possible to read/write firmware of this base unit. This unit has an answering machine in it, but the messages are prerecorded in german. I would like to try to change them to russian.
There is an Atmel AT45DB041 4mbit flash chip and an Infineon CPU in it.
On the housing there are three suspicious holes with contacts on the mainboard under them -- could it be a serial port for progrmming?

If somebody have any info on these phones or a service manual, please, give me a clue.

Thanks.

Grmn · 02-15-2004, 23:37

Quote:

Originally Posted by chris_ua

Hi!

Is it possible to read/write firmware of this base unit. This unit has an answering machine in it, but the messages are prerecorded in german. I would like to try to change them to russian.
There is an Atmel AT45DB041 4mbit flash chip and an Infineon CPU in it.
On the housing there are three suspicious holes with contacts on the mainboard under them -- could it be a serial port for progrmming?

If somebody have any info on these phones or a service manual, please, give me a clue.

Thanks.

three suspicious holes with contacts on the mainboard under them
i2c-interface,for programming 24c32
reprogramming at45db042 on Labtool48 Very simply.

djlu2003 · 02-27-2004, 18:16

hi,
there are a special conector for these 3 holes for reprogramming with labtool48??

there are another cheaper device programmer to do this :-) ???

a lot of thanks in advance.

regards.
djlu!

02-15-2004, 21:39	#1 (permalink)
chris_ua Freak Poster Join Date: Jan 2001 Location: Uzhgorod, Ukraine Age: 47 Posts: 305 Member: 3023 Status: Offline Thanks Meter: 1	Is it possile to reprogram/flash Siemens Gigaset 3015 DECT base? Hi! Is it possible to read/write firmware of this base unit. This unit has an answering machine in it, but the messages are prerecorded in german. I would like to try to change them to russian. There is an Atmel AT45DB041 4mbit flash chip and an Infineon CPU in it. On the housing there are three suspicious holes with contacts on the mainboard under them -- could it be a serial port for progrmming? If somebody have any info on these phones or a service manual, please, give me a clue. Thanks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Is it possible to read flash from one phone to flash to other same model	msa	ARM9 BASED M62 / M62+	3	04-15-2012 09:22
Is it possible to USB flash E65 with new firmware	elgar	J.A.F. By Jafsupport.com	4	11-24-2007 21:19
is it possible to replace flash chip on DCT?	sat	Nokia Digital Core Technology 4 ( DCT-4 )	15	10-18-2003 13:08
is it possile to unlock a Nokia 3330 if I put de IMEI?	renacuajo	Phone Unlocking Codes & Maps	1	02-23-2003 21:49

02-27-2004, 18:16	#3 (permalink)
djlu2003 Major Poster Join Date: Dec 2003 Posts: 48 Member: 47568 Status: Offline Thanks Meter: 0	hi, there are a special conector for these 3 holes for reprogramming with labtool48?? there are another cheaper device programmer to do this :-) ??? a lot of thanks in advance. regards. djlu!