!! all new nok 6020,3220,6270 DEATH !! Why... - GSM-Forum

distefano · 09-29-2005, 09:02

Beware !!

--------------------------------------------------------------------------------

It seem that we have some big troubles with some n6020 and 3220.
Fitst time I put anly PPM by Gryffin to 3220.All was ok but no possible to make a call.Phone was calling, and than back to main screen.
I tryed to flash phone mcu ppm cnt.
Now phone is death.
On Twister flashing start but I get error and flash is NIO NAME.
On Gryfin and GTI phone is possible to flash but not power on,and after flashing mcu and ppm flashing succesfully I got error.Just phone not switch on.
Any idea?
It is about new phones from germany,sw of Pho... is latest.
It looks like new loaders needed ir something new in update.
I know how to make phone alive but it is to much work to do to change Flsch IC and make RPL.Beside, it is to expensive too.
So what to do now ??

WBR
diStefano

*MaTeOoSh* · 09-29-2005, 09:32

it's simply the new flash chip ...

mobitek · 09-29-2005, 09:34

Quote:

Originally Posted by distefano

Beware !!

--------------------------------------------------------------------------------

It seem that we have some big troubles with some n6020 and 3220.
Fitst time I put anly PPM by Gryffin to 3220.All was ok but no possible to make a call.Phone was calling, and than back to main screen.
I tryed to flash phone mcu ppm cnt.
Now phone is death.
On Twister flashing start but I get error and flash is NIO NAME.
On Gryfin and GTI phone is possible to flash but not power on,and after flashing mcu and ppm flashing succesfully I got error.Just phone not switch on.
Any idea?
It is about new phones from germany,sw of Pho... is latest.
It looks like new loaders needed ir something new in update.
I know how to make phone alive but it is to much work to do to change Flsch IC and make RPL.Beside, it is to expensive too.
So what to do now ??

WBR
diStefano

What software version is on the 3220 "made in germany" I have flashed a number of these, had no problems yet

vule · 09-29-2005, 10:10

Quote:

Originally Posted by *MaTeOoSh*

it's simply the new flash chip ...

It's new MCUID too...

BR

Vule

chiragp · 09-29-2005, 10:22

i think there should some proper discussion here or we all go in so much loss that we can not think pls experts go through this post because every one get this same pro

distefano · 09-29-2005, 17:18

We need new fia and maybe other new files.
So MASTERS OF SW we wait for Yours help as quick as possible

flashfone · 09-29-2005, 17:20

Quote:

Originally Posted by distefano

Beware !!

--------------------------------------------------------------------------------

It seem that we have some big troubles with some n6020 and 3220.
Fitst time I put anly PPM by Gryffin to 3220.All was ok but no possible to make a call.Phone was calling, and than back to main screen.
I tryed to flash phone mcu ppm cnt.
Now phone is death.
On Twister flashing start but I get error and flash is NIO NAME.
On Gryfin and GTI phone is possible to flash but not power on,and after flashing mcu and ppm flashing succesfully I got error.Just phone not switch on.
Any idea?
It is about new phones from germany,sw of Pho... is latest.
It looks like new loaders needed ir something new in update.
I know how to make phone alive but it is to much work to do to change Flsch IC and make RPL.Beside, it is to expensive too.
So what to do now ??

WBR
diStefano

I have done these fones many times no problem!!
mate

Khryssis · 09-30-2005, 15:00

Yes, all of you have done this type of phone many times but be alerted that there are new types (I think with new flash chip and MCU ID) that will die if you flash the normal way.

Anyone with any detailed info about flash chip and mcuid please post here.

Regards.

sathya84 · 09-30-2005, 15:43

I have three 6020 phones dead at the same way. I think also that some new loaders are we want atherwise new firmware we want. In my 6020 i flashed with 3.52 version so that its dead. I want 3.92v for that anybady help me i will try and say that result.

ViperGSM · 09-30-2005, 15:50

i solved this 6020 problem with 3.92 version,also was killed with 3.52

Raskal · 09-30-2005, 21:49

Quote:

Originally Posted by distefano

Beware !!

--------------------------------------------------------------------------------

It seem that we have some big troubles with some n6020 and 3220.
Fitst time I put anly PPM by Gryffin to 3220.All was ok but no possible to make a call.Phone was calling, and than back to main screen.
I tryed to flash phone mcu ppm cnt.
Now phone is death.
On Twister flashing start but I get error and flash is NIO NAME.
On Gryfin and GTI phone is possible to flash but not power on,and after flashing mcu and ppm flashing succesfully I got error.Just phone not switch on.
Any idea?
It is about new phones from germany,sw of Pho... is latest.
It looks like new loaders needed ir something new in update.
I know how to make phone alive but it is to much work to do to change Flsch IC and make RPL.Beside, it is to expensive too.
So what to do now ??

WBR
diStefano

Have you try it with JAF?

B.R.,
Raskal

debeliamark · 10-01-2005, 05:47

Quote:

Originally Posted by distefano

Beware !!

--------------------------------------------------------------------------------

It seem that we have some big troubles with some n6020 and 3220.
Fitst time I put anly PPM by Gryffin to 3220.All was ok but no possible to make a call.Phone was calling, and than back to main screen.
I tryed to flash phone mcu ppm cnt.
Now phone is death.
On Twister flashing start but I get error and flash is NIO NAME.
On Gryfin and GTI phone is possible to flash but not power on,and after flashing mcu and ppm flashing succesfully I got error.Just phone not switch on.
Any idea?
It is about new phones from germany,sw of Pho... is latest.
It looks like new loaders needed ir something new in update.
I know how to make phone alive but it is to much work to do to change Flsch IC and make RPL.Beside, it is to expensive too.
So what to do now ??

WBR
diStefano

It's true ... so phone work correct when test it with GSM tester but send some crap data to network providers, at least phone registered to network also send / recive packets, but going like bared unit. Look like a PM structure is changed.

Hint1 - exclude FullFactory setting after flash when use Griffin.
Hint1a - upload only PPM with UFS/Tornado/ect...
Hint2 - but stupid, because is slow and rewrite original data - rewrite PM from phone original maded uder 4.54 ( for 3220 ) and / sorry until now i have no right data for other afected models ( 6230i, 6020, 6030 for sure and may be 6021 ) / then flash with Griffin/UFS ect...

So there must be added from support teams SW developers some trick to jump arround ******ing network when flashing.

WBR, DebeliaMark, BG

klaus4 · 10-01-2005, 18:04

Quote:

Originally Posted by Raskal

Have you try it with JAF?

B.R.,
Raskal

Your ****ing product should be better than ufs????? This is the joke of the year realy

distefano · 10-02-2005, 20:12

I used PBB,GTI,Twister,Griffin but no succes

Phone is still death.
Now I am sure that we need new files to make phone alive (fia, etc)

WBR
diStefano

Raskal · 10-02-2005, 20:19

I tested 6020 here and works with JAF. Look at flasing log.

http:///vbb/showpo...7&postcount=34

I will test now with latest twister version and also post the log.

09-29-2005, 09:02	#1 (permalink)
distefano Freak Poster Join Date: May 2003 Location: POLAND Age: 48 Posts: 476 Member: 29669 Status: Offline Thanks Meter: 1	!! all new nok 6020,3220,6270 DEATH !! Why... Beware !! -------------------------------------------------------------------------------- It seem that we have some big troubles with some n6020 and 3220. Fitst time I put anly PPM by Gryffin to 3220.All was ok but no possible to make a call.Phone was calling, and than back to main screen. I tryed to flash phone mcu ppm cnt. Now phone is death. On Twister flashing start but I get error and flash is NIO NAME. On Gryfin and GTI phone is possible to flash but not power on,and after flashing mcu and ppm flashing succesfully I got error.Just phone not switch on. Any idea? It is about new phones from germany,sw of Pho... is latest. It looks like new loaders needed ir something new in update. I know how to make phone alive but it is to much work to do to change Flsch IC and make RPL.Beside, it is to expensive too. So what to do now ?? WBR diStefano

09-29-2005, 17:18	#6 (permalink)
distefano Freak Poster Join Date: May 2003 Location: POLAND Age: 48 Posts: 476 Member: 29669 Status: Offline Thanks Meter: 1	yeah We need new fia and maybe other new files. So MASTERS OF SW we wait for Yours help as quick as possible

10-02-2005, 20:12	#14 (permalink)
distefano Freak Poster Join Date: May 2003 Location: POLAND Age: 48 Posts: 476 Member: 29669 Status: Offline Thanks Meter: 1	no I used PBB,GTI,Twister,Griffin but no succes Phone is still death. Now I am sure that we need new files to make phone alive (fia, etc) WBR diStefano

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
speaker ways nok 6020	pian_aneurysm	Nokia Hardware & Hardware Repair	6	12-13-2008 06:07
why always error when flashing 6020,3220	CONG YANG	MT-BOX	2	08-25-2007 09:25
All Nokia New Phones like 3250, 6270, 6280, 6630, 6680, 6681, 6682, 7370 N90 and N70.	singapore	Nokia Base Band 5 ( BB-5 )	10	04-20-2006 23:24
Unlock NOK 6610i and all NEW	dusky	Nokia Digital Core Technology 4 ( DCT-4 )	1	05-17-2005 08:14

09-29-2005, 09:32	#2 (permalink)
MaTeOoSh No Life Poster Join Date: Dec 2000 Location: gsmdoctor.pl Age: 48 Posts: 1,317 Member: 2755 Status: Offline Thanks Meter: 42	it's simply the new flash chip ...

09-29-2005, 10:22	#5 (permalink)
chiragp Cheater -Don't Deal with him- Join Date: Jan 2005 Location: U S A / GOA /CHINA Age: 44 Posts: 6,848 Member: 106367 Status: Offline Sonork: 100.1577436 Thanks Meter: 2,452	i think there should some proper discussion here or we all go in so much loss that we can not think pls experts go through this post because every one get this same pro

09-30-2005, 15:00	#8 (permalink)
Khryssis Freak Poster Join Date: Oct 2003 Location: MaxCom♥ Age: 45 Posts: 257 Member: 41067 Status: Offline Thanks Meter: 4	Yes, all of you have done this type of phone many times but be alerted that there are new types (I think with new flash chip and MCU ID) that will die if you flash the normal way. Anyone with any detailed info about flash chip and mcuid please post here. Regards.

09-30-2005, 15:43	#9 (permalink)
sathya84 Insane Poster Join Date: Aug 2005 Age: 39 Posts: 99 Member: 167773 Status: Offline Thanks Meter: 8	I have three 6020 phones dead at the same way. I think also that some new loaders are we want atherwise new firmware we want. In my 6020 i flashed with 3.52 version so that its dead. I want 3.92v for that anybady help me i will try and say that result.

09-30-2005, 15:50	#10 (permalink)
ViperGSM No Life Poster Join Date: Jan 2004 Location: Serbia Age: 40 Posts: 871 Member: 49634 Status: Offline Sonork: 100.1671023 Thanks Meter: 71	i solved this 6020 problem with 3.92 version,also was killed with 3.52

10-02-2005, 20:19	#15 (permalink)
Raskal Banned Join Date: Oct 1999 Age: 55 Posts: 14,535 Member: 563 Status: Offline Thanks Meter: 22,328	I tested 6020 here and works with JAF. Look at flasing log. http:///vbb/showpo...7&postcount=34 I will test now with latest twister version and also post the log.