sonyerr Z200 - GSM-Forum

.::sly::. · 09-03-2005, 09:17

plz how can flash it wit twister? what flash files will i select

kades · 09-03-2005, 12:49

Hi mate!

Follows my tested procedure, it's safest:

1) Make sure battery is fully charged.
2) Load atrz and press connect (do not connect phone yet)
3) Press Go
4) Attach cable to phone make sure phone is off and not say charging!
5) BOOT OK
6) DISABLE "High speed flashing"
6) CHOOSE FLASH FILES
MCU1 = z200_125722_R6C_Con5.bis
MCU2 = z200_125722_R6C_fix5.bis
CUST = z200_cust_std.bis
7) FLASH MCU AND AFTER FLASH CUST
8) INIT SECBLK
9) Phone does not power on then take out battery, re-attach battery and press ok, wait for flash to finish.

09-03-2005, 09:17	#1 (permalink)
.::sly::. Freak Poster Join Date: Nov 2004 Location: Ngeria Age: 41 Posts: 247 Member: 94542 Status: Offline Sonork: 104341 Thanks Meter: 77	sonyerr Z200 plz how can flash it wit twister? what flash files will i select

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sonyerric files	syed tuqeer	HWK	4	07-15-2008 15:40
z200 not charging,another z200 mic problem.	de brain box	Sony Ericsson Hardware Repair	3	12-10-2007 09:31
SONYERRIC Z310i	Dr cellular uk	Sony Ericsson	5	06-30-2007 11:36
Mt-box Nokia & Mt-box Sonyerr. == Mt-box Total	kalpeshoza	MT-BOX	2	04-25-2007 07:39
Infinity please Update sonyerrics J220,J230	Wesleyraff	Infinity-Box	1	12-16-2006 17:20

09-03-2005, 12:49	#2 (permalink)
kades No Life Poster Join Date: Aug 2004 Location: Brazil Age: 44 Posts: 754 Member: 77651 Status: Offline Thanks Meter: 21	Hi mate! Follows my tested procedure, it's safest: 1) Make sure battery is fully charged. 2) Load atrz and press connect (do not connect phone yet) 3) Press Go 4) Attach cable to phone make sure phone is off and not say charging! 5) BOOT OK 6) DISABLE "High speed flashing" 6) CHOOSE FLASH FILES MCU1 = z200_125722_R6C_Con5.bis MCU2 = z200_125722_R6C_fix5.bis CUST = z200_cust_std.bis 7) FLASH MCU AND AFTER FLASH CUST 8) INIT SECBLK 9) Phone does not power on then take out battery, re-attach battery and press ok, wait for flash to finish.