G530H after flash touchscreen not working..

[watari31]

guys help can anyone experience this kind of problem have try to flash G530H on

G530HDXU2AOE2_G530HOLB2AOE1_G530HXXU2AOD1_HOME.tar .md5

and it failed but after i on the phone still can on but touchscreen not working..

original firmware inside is ff:
AP:G530HXCU1AOA2
CP:G530HXCU1AOA2
CSC:G530H0JV1AOA2

i have try to flash on this firmware

G530HXCU1AOA2_G530HOJV1AOA1_G530HXCU1AOA2_HOME.tar .md5
G530HXCU1AOA2_G530HSER1AOA2_G530HXCU1AOA2_HOME.tar .md5

ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G530HXCU1AOA2_G530HSER1AOA2_G530HXCU1AOA2_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> aboot.mbn
<ID:0/013> NAND Write Start!!
<ID:0/013> sbl1.mbn
<ID:0/013> rpm.mbn
<ID:0/013> tz.mbn
<ID:0/013> hyp.mbn
<ID:0/013> NON-HLOS.bin
<ID:0/013> sec.dat
<ID:0/013> boot.img
<ID:0/013> recovery.img
<ID:0/013> system.img.ext4
<ID:0/013> cache.img.ext4
<ID:0/013> hidden.img.ext4
<ID:0/013> modem.bin
<ID:0/013> RQT_CLOSE !!
<ID:0/013> RES OK !!
<ID:0/013> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)


both successfully finish the flashing but still the touchscreen not working..

[watari31]

problem solved i changed the fullset lcd w/ tp..

but im still puzzled why become lcd w/tp problem from which i just reprogram the phone. hmmm possible because of the DV or DS thing well we dont know...