k610 mic problem - GSM-Forum

georgegsmro · 05-08-2007, 10:20

please help with mic ways on k610.

best regards

chentaur · 05-16-2007, 17:17

I have a K610 with the same problem. Witch is the mic BGA? THX

otsch · 05-23-2007, 01:43

You can do the old mic. with Hotair Desolder, and then against Nokia 6101 Mic. substituted without Solder only with the 2 Small Golden Spring.

B.R.

sjakie · 07-10-2007, 12:05

very good.

thanks
Sjakie

Quote:

Originally Posted by otsch

You can do the old mic. with Hotair Desolder, and then against Nokia 6101 Mic. substituted without Solder only with the 2 Small Golden Spring.

B.R.

Smay · 07-18-2007, 10:39

but its pcb not have reading on one point plz help what i do?

samirov-gsm · 12-29-2009, 13:30

05-08-2007, 10:20	#1 (permalink)
georgegsmro Freak Poster Join Date: Sep 2005 Location: cluj romania Posts: 390 Member: 185422 Status: Offline Thanks Meter: 41	k610 mic problem please help with mic ways on k610. best regards

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
k610 mic ways	baldovica	Sony Ericsson Hardware Repair	29	03-12-2014 03:34
Best way for changing k750 / k800 / k610 mic	platinumLA	Sony Ericsson Hardware Repair	5	10-23-2010 00:09
K610 mic pad damaged	littel	Sony Ericsson Hardware Repair	11	07-19-2010 22:41
k610 speaker n mic problem	shazrenda	Sony Ericsson Hardware Repair	1	04-10-2009 07:50
Sony Ericsson K610 mic	M jamshed iqbal	Sony Ericsson Hardware Repair	0	07-06-2007 13:35

05-16-2007, 17:17	#2 (permalink)
chentaur Junior Member Join Date: Sep 2005 Age: 41 Posts: 4 Member: 180691 Status: Offline Thanks Meter: 1	I have a K610 with the same problem. Witch is the mic BGA? THX

05-23-2007, 01:43	#3 (permalink)
otsch Junior Member Join Date: Apr 2005 Age: 44 Posts: 24 Member: 133339 Status: Offline Thanks Meter: 1	You can do the old mic. with Hotair Desolder, and then against Nokia 6101 Mic. substituted without Solder only with the 2 Small Golden Spring. B.R.

07-18-2007, 10:39	#5 (permalink)
Smay Major Poster Join Date: Aug 2005 Location: Pakistan Age: 47 Posts: 47 Member: 168810 Status: Offline Thanks Meter: 2	but its pcb not have reading on one point plz help what i do?

12-29-2009, 13:30	#6 (permalink)
samirov-gsm No Life Poster Join Date: Apr 2008 Posts: 4,525 Member: 759168 Status: Offline Thanks Meter: 12,866