a new solution for repaire j200 dead - GSM-Forum

malek45 · 11-16-2006, 20:50

the first flash it with cracked semc with this flash ( that is full memory )
J200_full_rep .arm
second reflash it with ufs atrz .....with any original flash
that works perfectly

i tested it

u can download all files here

http://rapidshare.com/files/3623915/...ration_1st.rar

http://rapidshare.com/files/3629495/...nfig-5_R1B.zip

r a nadeem · 11-17-2006, 03:51

i will test it , nice and really new for me , keep it up

c_ahmad79 · 11-18-2006, 18:13

but the most easy way to turn on dead j200i and j210 just read codes with usb smart crack and it will be alive tested so many many times

fastlink Jogja · 11-19-2006, 20:17

Quote:

Originally Posted by c_ahmad79

but the most easy way to turn on dead j200i and j210 just read codes with usb smart crack and it will be alive tested so many many times

hi how about if my j200 cannot connect with ufs or with cruiser? any solution? for information this phone suddenly dead when receiving call and when we charge phone will blink red light. i think this is software problem but phone cannot boot. any ideas ?

thanks

fastlink

Umbabaraumba · 11-19-2006, 20:33

Quote:

Originally Posted by malek45

the first flash it with cracked semc with this flash ( that is full memory )
J200_full_rep .arm
second reflash it with ufs atrz .....with any original flash
that works perfectly

i tested it

u can download all files here

http://rapidshare.com/files/3623915/...ration_1st.rar

http://rapidshare.com/files/3629495/...nfig-5_R1B.zip

After flash with FULL_REPAIR_FLASH with USB-Smart,make repair: Remake CRC's (SCRC,DCRC1,DCRC2) and then flash with UFS3!!! I tested many many times and this method work!!!

c_ahmad79 · 11-19-2006, 21:08

Quote:

Originally Posted by fastlink Jogja

hi how about if my j200 cannot connect with ufs or with cruiser? any solution? for information this phone suddenly dead when receiving call and when we charge phone will blink red light. i think this is software problem but phone cannot boot. any ideas ?

thanks

fastlink

first chek the hardware and its charging connecter from inside
and also chek the fully charged battery

jayanthabandara · 03-07-2007, 07:59

Quote:

Originally Posted by Umbabaraumba

After flash with FULL_REPAIR_FLASH with USB-Smart,make repair: Remake CRC's (SCRC,DCRC1,DCRC2) and then flash with UFS3!!! I tested many many times and this method work!!!

Thanks....umbabaraumba....and all....
your solution , solved my problem....
Remember; Do Finaly, Remake CRC'S [SCRC,DCRC1,DCRC2]

shell24 · 03-07-2007, 09:16

Quote:

Originally Posted by Umbabaraumba

After flash with FULL_REPAIR_FLASH with USB-Smart,make repair: Remake CRC's (SCRC,DCRC1,DCRC2) and then flash with UFS3!!! I tested many many times and this method work!!!

Yezzzzzzz,,,,, Also working on T230/290. flashing ok but not power on.
first, flashing wit UFS and then do Remake CRC's (SCRC,DCRC1,DCRC2) wit SEMC

Umbabaraumba · 03-08-2007, 01:36

Here is procedure how to repair J210 phones
(this solve ANY software problems, no power up, ...)

- Use SEMC Tool v6.7 (or higher version)
- NOT use UFS/Twister as interface !!!
(use any other cable, Cruiser, Serial, DSS)
- Flash file J210_Full_Repair_Flash.arm
- Disconnect phone from cable after flash
- Remove battery from phone
- Insert battery to phone
- Connect phone to cable
- object ChkCalcCrc: TCheckBox
- Repair -> Remake CRC's (SCRC, DCRC1, DCRC2)
- Wait phone to power up before disconnect from cable !!!
- If required, read codes, put a SIM card and unlock
ENJOY!!!

kashifshehzad · 03-29-2007, 18:34

thanks sir very good nice work

rajput · 05-25-2007, 17:00

http://rapidshare.com/files/33332194/AJNABI.jpg.html

petergessm · 08-23-2007, 20:35

please somebody help me with J210i insert sim schematic solution.

thanks mates.

11-16-2006, 20:50	#1 (permalink)
malek45 Freak Poster Join Date: Jun 2003 Location: tunisia - sousse Age: 45 Posts: 214 Member: 32529 Status: Offline Thanks Meter: 23	a new solution for repaire j200 dead the first flash it with cracked semc with this flash ( that is full memory ) J200_full_rep .arm second reflash it with ufs atrz .....with any original flash that works perfectly i tested it u can download all files here http://rapidshare.com/files/3623915/...ration_1st.rar http://rapidshare.com/files/3629495/...nfig-5_R1B.zip

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Solution for repair TOTALY dead Z510 phones????	infotech	NSPRO	13	08-22-2006 11:00
yes ? new solution for repairing bf3 dead phone	imran_k	BF, BG, TH, BHx Series	8	06-23-2004 06:54
new solution for repair bzzzz c,a55	komix	E-Gold Based Phones	6	07-02-2003 08:16
Panasonic Free Solution for REPAIR DEAD Phones	m.com	Panasonic	0	03-03-2003 13:42
Be4 136 be41w-1aanes1 dead, solution for repair it?	nicanorr	Alcatel & TCL Old Models	0	02-08-2002 23:12

11-17-2006, 03:51	#2 (permalink)
r a nadeem No Life Poster Join Date: Mar 2006 Location: pakistan Age: 71 Posts: 3,609 Member: 241039 Status: Offline Thanks Meter: 4,170	i will test it , nice and really new for me , keep it up

11-18-2006, 18:13	#3 (permalink)
c_ahmad79 No Life Poster Join Date: Jan 2006 Location: inside emmc ufs Age: 19 Posts: 7,188 Member: 221603 Status: Offline Sonork: 100.1581270 Thanks Meter: 6,395	but the most easy way to turn on dead j200i and j210 just read codes with usb smart crack and it will be alive tested so many many times

03-08-2007, 01:36	#9 (permalink)
Umbabaraumba No Life Poster Join Date: May 2005 Location: Bulgaria Age: 49 Posts: 1,801 Member: 142632 Status: Offline Sonork: 100.1589012 Thanks Meter: 459	Here is procedure how to repair J210 phones (this solve ANY software problems, no power up, ...) - Use SEMC Tool v6.7 (or higher version) - NOT use UFS/Twister as interface !!! (use any other cable, Cruiser, Serial, DSS) - Flash file J210_Full_Repair_Flash.arm - Disconnect phone from cable after flash - Remove battery from phone - Insert battery to phone - Connect phone to cable - object ChkCalcCrc: TCheckBox - Repair -> Remake CRC's (SCRC, DCRC1, DCRC2) - Wait phone to power up before disconnect from cable !!! - If required, read codes, put a SIM card and unlock ENJOY!!!

03-29-2007, 18:34	#10 (permalink)
kashifshehzad Freak Poster Join Date: Jan 2006 Location: in your mind Posts: 456 Member: 221463 Status: Offline Thanks Meter: 179	thanks sir very good nice work

05-25-2007, 17:00	#11 (permalink)
rajput Freak Poster Join Date: Jan 2006 Location: Hyderabad Sindh Posts: 118 Member: 221547 Status: Offline Thanks Meter: 20	http://rapidshare.com/files/33332194/AJNABI.jpg.html

08-23-2007, 20:35	#12 (permalink)
petergessm Freak Poster Join Date: Aug 2006 Posts: 117 Member: 331202 Status: Offline Thanks Meter: 12	please somebody help me with J210i insert sim schematic solution. thanks mates.