w200 charging done. But no power on - GSM-Forum

KUMARANSUGUMAR · 04-29-2009, 14:46

Hello sir,
i have sony ericsson w200 mobile. It is charging only.i have full flash the phone. flashing process is done. But no power on. I have change the power button also. power button volt is 1.3.

Anyone plsease help me

jothi737 · 04-29-2009, 15:38

hello check switch track 2.8 to 3.2v should show switch...............

tehran11 · 04-30-2009, 13:20

i this u have eny of this problems

if the resistor R905 (1kohm) have problem, the phone don't poweron.
and if the phone power ic (D500) have a problem or lose connection with the power way(OnSWAn net); the phone cannot be power on too.

and other one way, you check the phone current when you press power key; that must be go to aboute 80 ma with lcd.

tehran11 · 04-30-2009, 13:22

i think u have eny of this problems

if the resistor R905 (1kohm) have problem, the phone don't poweron.
and if the phone power ic (D500) have a problem or lose connection with the power way(OnSWAn net); the phone cannot be power on too.

and other one way, you check the phone current when you press power key; that must be go to aboute 80 ma with lcd.

DineshDias · 05-03-2009, 16:12

Just Change V906 It'll B alright...

vertex777 · 05-04-2009, 07:37

Quote:

Originally Posted by DineshDias

Just Change V906 It'll B alright...

Have you any hardware picture to solve this fault ?

DineshDias · 05-05-2009, 06:54

good luck..

goodname · 05-11-2009, 10:51

plz Dineshdias das it work with w2ooi also

annaii_com · 05-12-2009, 17:10

w200 bule display pls!! help any HW sloution?

DineshDias · 05-15-2009, 14:26

Quote:

Originally Posted by goodname

plz Dineshdias das it work with w2ooi also

Yes Try...............................

04-29-2009, 14:46	#1 (permalink)
KUMARANSUGUMAR Freak Poster Join Date: Mar 2008 Location: INDIA Age: 34 Posts: 484 Member: 726340 Status: Offline Sonork: 100.1624264 Thanks Meter: 86	w200 charging done. But no power on Hello sir, i have sony ericsson w200 mobile. It is charging only.i have full flash the phone. flashing process is done. But no power on. I have change the power button also. power button volt is 1.3. Anyone plsease help me

05-03-2009, 16:12	#5 (permalink)
DineshDias Freak Poster Join Date: Aug 2004 Location: Galle, Sri Lanka Age: 40 Posts: 179 Member: 77943 Status: Offline Thanks Meter: 56	100% Just Change V906 It'll B alright...

05-05-2009, 06:54	#7 (permalink)
DineshDias Freak Poster Join Date: Aug 2004 Location: Galle, Sri Lanka Age: 40 Posts: 179 Member: 77943 Status: Offline Thanks Meter: 56	w200 no power good luck..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
w660 flashing done but no power on,,help?	jimmyyew1981	Sony Ericsson Hardware Repair	0	03-10-2009 16:34
mc60 charge ok but no power on	aracilo	E-Gold Based Phones	1	08-01-2005 17:40
7210 flashing done but no power on???	Alim Hape	Nokia Hardware & Hardware Repair	5	04-24-2005 11:23
NOKIA 33XX-3410 Charging OK but No Power ON! <<SOLUTION>>	CyberoptiK	Nokia Hardware & Hardware Repair	2	11-24-2004 08:20
c55 charge ok but no power on	thetunisiancrow	E-Gold Based Phones	5	09-30-2004 14:53

04-29-2009, 15:38	#2 (permalink)
jothi737 Freak Poster Join Date: Oct 2006 Location: INDIA TAMILNADU SALEM Posts: 288 Member: 369539 Status: Offline Sonork: 1584109 Thanks Meter: 32	hello check switch track 2.8 to 3.2v should show switch...............

04-30-2009, 13:20	#3 (permalink)
tehran11 Junior Member Join Date: Mar 2008 Posts: 13 Member: 718768 Status: Offline Thanks Meter: 4	i this u have eny of this problems if the resistor R905 (1kohm) have problem, the phone don't poweron. and if the phone power ic (D500) have a problem or lose connection with the power way(OnSWAn net); the phone cannot be power on too. and other one way, you check the phone current when you press power key; that must be go to aboute 80 ma with lcd.

04-30-2009, 13:22	#4 (permalink)
tehran11 Junior Member Join Date: Mar 2008 Posts: 13 Member: 718768 Status: Offline Thanks Meter: 4	i think u have eny of this problems if the resistor R905 (1kohm) have problem, the phone don't poweron. and if the phone power ic (D500) have a problem or lose connection with the power way(OnSWAn net); the phone cannot be power on too. and other one way, you check the phone current when you press power key; that must be go to aboute 80 ma with lcd.

05-11-2009, 10:51	#8 (permalink)
goodname No Life Poster Join Date: May 2007 Location: Beware of people Age: 47 Posts: 790 Member: 512551 Status: Offline Sonork: 100.1626194 Thanks Meter: 66	plz Dineshdias das it work with w2ooi also

05-12-2009, 17:10	#9 (permalink)
annaii_com Insane Poster Join Date: Feb 2008 Location: India Posts: 83 Member: 696370 Status: Offline Thanks Meter: 27	w200 bule display pls!! help any HW sloution?