A1000 After Unlock Hang In ""3g""-help Me For Tp Resistor Value - GSM-Forum

zone2 · 07-18-2008, 17:57

tried a A1000 to unlock.first backup

"S Blank Rainbow POG 354911002294726.mbk" saved, 11.23 Mb

then tried to unlock-got unlock ok-logs as below

Searching for phone... found S Blank Rainbow POG, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 3.10
Reading flash id... Intel - 28F128L18B
Reading flash id/2... none, OK
Phone group: A1000,M1000
Hardware IMEI: 354911002294726
IMEI OTP status: locked
Security area saved to "PDS for S Blank Rainbow POG 354911002294726.mbk"
"S Blank Rainbow POG 354911002294726.mbk" saved, 11.23 Mb
Unlocking phone... OK

but after unlock-set on-but hang in ""3G"" LOGO

SO I THINK ITS SOFTWARE-

i did not see flash file for A1000 to flash in smart clip-so tried in SCOUT-BUT AN ERROR .
""""FLASH FAILED-FLASH COMPLETED WITH ERROR-FLASH LIBRARY ERROR 119"""

IS IT HARDWARE?

TRIED IN RSD LITE ALSO-NEAR 75% FLASHING COMPLETED-THEN AN ERROR

WHAT I DO TO REVIVE MY PHONE?

in below link show that its due to testpoint resistor damaged.

http://forum.gsmhosting.com/vbb/show...ighlight=a1000

i have not another A1000 BOARD to replace it-can i replace any another motorola models?

help me

thank u

bootgsm · 07-18-2008, 22:53

hello upload a good photo of test point on your a1000 or send it to my email

RauF 2 · 07-19-2008, 07:49

no need to flash follow hard reset. i cant upload pictures.

see the link. http://dc39.4shared.com/img/15494290...ar.jpg?sizeM=3

uqbah · 07-19-2008, 08:13

Quote:

Originally Posted by zone2

tried a A1000 to unlock.first backup

"S Blank Rainbow POG 354911002294726.mbk" saved, 11.23 Mb

then tried to unlock-got unlock ok-logs as below

Searching for phone... found S Blank Rainbow POG, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 3.10
Reading flash id... Intel - 28F128L18B
Reading flash id/2... none, OK
Phone group: A1000,M1000
Hardware IMEI: 354911002294726
IMEI OTP status: locked
Security area saved to "PDS for S Blank Rainbow POG 354911002294726.mbk"
"S Blank Rainbow POG 354911002294726.mbk" saved, 11.23 Mb
Unlocking phone... OK

but after unlock-set on-but hang in ""3G"" LOGO

SO I THINK ITS SOFTWARE-

i did not see flash file for A1000 to flash in smart clip-so tried in SCOUT-BUT AN ERROR .
""""FLASH FAILED-FLASH COMPLETED WITH ERROR-FLASH LIBRARY ERROR 119"""

IS IT HARDWARE?

TRIED IN RSD LITE ALSO-NEAR 75% FLASHING COMPLETED-THEN AN ERROR

WHAT I DO TO REVIVE MY PHONE?

in below link show that its due to testpoint resistor damaged.

http://forum.gsmhosting.com/vbb/show...ighlight=a1000

i have not another A1000 BOARD to replace it-can i replace any another motorola models?

help me

thank u

yes u can find it on c975 also...

br khalid

Pandemonio100 · 07-19-2008, 09:11

Restore backup of security and look if phone turn on in normal mode.

zipzap_kill · 11-04-2008, 07:29

done with reset use this pic

phone@studio · 05-17-2010, 17:02

simply do PDS repair with usb smart cracked ver3.9.thats all.post reply after operation.

07-18-2008, 17:57	#1 (permalink)
zone2 Freak Poster Join Date: Oct 2007 Location: KERALA Posts: 332 Member: 609370 Status: Offline Thanks Meter: 13	A1000 After Unlock Hang In ""3g""-help Me For Tp Resistor Value tried a A1000 to unlock.first backup "S Blank Rainbow POG 354911002294726.mbk" saved, 11.23 Mb then tried to unlock-got unlock ok-logs as below Searching for phone... found S Blank Rainbow POG, getting test interface... interface not found Switching to flash mode... OK Reading phone boot version... 3.10 Reading flash id... Intel - 28F128L18B Reading flash id/2... none, OK Phone group: A1000,M1000 Hardware IMEI: 354911002294726 IMEI OTP status: locked Security area saved to "PDS for S Blank Rainbow POG 354911002294726.mbk" "S Blank Rainbow POG 354911002294726.mbk" saved, 11.23 Mb Unlocking phone... OK but after unlock-set on-but hang in ""3G"" LOGO SO I THINK ITS SOFTWARE- i did not see flash file for A1000 to flash in smart clip-so tried in SCOUT-BUT AN ERROR . """"FLASH FAILED-FLASH COMPLETED WITH ERROR-FLASH LIBRARY ERROR 119""" IS IT HARDWARE? TRIED IN RSD LITE ALSO-NEAR 75% FLASHING COMPLETED-THEN AN ERROR WHAT I DO TO REVIVE MY PHONE? in below link show that its due to testpoint resistor damaged. http://forum.gsmhosting.com/vbb/show...ighlight=a1000 i have not another A1000 BOARD to replace it-can i replace any another motorola models? help me thank u

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help Me To Flash A1000-hang In ""3g"" Logo After Unlock	zone2	Smart-Clip	1	07-01-2008 09:26
A1000 After Unlock Hang In ""3g"" Logo-help	zone2	Smart-Clip	3	06-29-2008 17:34
k800 dead after unlock CRUISER v11.00 help me please	rafart	Cruiser Suite	43	06-11-2007 19:39
please any one help me for how i know the new model for w800 and K750 want Tp with cr	gsm4libya	Cruiser Suite	0	05-07-2006 05:06
i have K750 problen in plothot hanging can any one help me for it	gsm4libya	Cruiser Suite	0	12-15-2005 02:08

07-18-2008, 22:53	#2 (permalink)
bootgsm No Life Poster Join Date: Jun 2007 Location: colmar Posts: 637 Member: 527800 Status: Offline Thanks Meter: 234	hello upload a good photo of test point on your a1000 or send it to my email

07-19-2008, 07:49	#3 (permalink)
RauF 2 Freak Poster Join Date: Jun 2008 Posts: 168 Member: 792891 Status: Offline Thanks Meter: 33	no need to flash follow hard reset. i cant upload pictures. see the link. http://dc39.4shared.com/img/15494290...ar.jpg?sizeM=3

07-19-2008, 09:11	#5 (permalink)
Pandemonio100 No Life Poster Join Date: Feb 2001 Location: ITALY Age: 51 Posts: 3,969 Member: 3381 Status: Offline Thanks Meter: 1,171	Restore backup of security and look if phone turn on in normal mode.

05-17-2010, 17:02	#7 (permalink)
phone@studio Freak Poster Join Date: Jul 2005 Location: nigeria,benin Age: 44 Posts: 119 Member: 164820 Status: Offline Sonork: phone@studio Thanks Meter: 8	simply do PDS repair with usb smart cracked ver3.9.thats all.post reply after operation.