C975 Boot 0.5.f.1 - GSM-Forum

alhamde16 · 01-21-2007, 12:06

I GOT A C975 r245_u82.21.80i
BOOT 0.5.f.1
I HAVE SMART CLIP V2.26
SMARTMOTO V 1.23
CAN I UNLOCK IT
AND HOW
THX IN ADV

Antuk · 01-21-2007, 12:15

I had the same phone, it is impossible to unlock it with your version of Smart-clip. You must have S-card, and it's unlocking with patch.

With S-card, I unlocked it in a few minutes.

Mr.Tinkertrain · 01-22-2007, 08:59

@ alhamde16,

If C975 r245_u82.21.80i original firmware version and the boot is 0.5.f.1, then you can unlock it with simple "One Button" method.
If original firmware version was R245_U_82.21.91I then it can be unlocked with new version of Smart-Clip and SmartMoto.

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

alhamde16 · 01-22-2007, 12:54

the original firmware is C975 r245_u82.21.80i but the boot was 6.1.2 and i downgreade it to 0.5.f.1
the phone is ok but i cant unlock it by pressing the unlock button
the cable i use is the same to flashe it is that ok
please help me

GSM_Support · 01-22-2007, 13:31

Make sure that is not a FORCED BOOT MODE CABLE...

Best Regards
GSMServer team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

Afzaal · 01-22-2007, 13:42

I use Force Boot Cable in Unlocking A1000.
What Else we can do with this Cable???
BR.

sabby_singh · 01-22-2007, 20:10

sir,i tried to unlock c975 firmware R245_U_82.21.91I with patch file.it showing error D3 and unlocking failed now hone is not on. i've flashed it with C975_R24_U_80[1].2F.3B.00.02P_lp002C_full_flash.smf but i'm still not able to make on or unlock it
plz. help me it's urgent

Mr.Tinkertrain · 01-23-2007, 08:45

@ sabby_singh,

Please show log file fromm unlock procedure.

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

alhamde16 · 01-23-2007, 12:34

Quote:

Originally Posted by GSM_Support

Make sure that is not a FORCED BOOT MODE CABLE...

Best Regards
GSMServer team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

my cable is forced boot i made it to flash took the schem from bootloader what should i use insted , please schematic
thx in adv

Mr.Tinkertrain · 01-23-2007, 13:07

@ alhamde16,

you should use standard cable. Pinout can be found here:http://www.smart-clip.com/motorola_p...dard_cable.png

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

mrfixit · 01-23-2007, 13:19

Quote:

Originally Posted by alhamde16

I GOT A C975 r245_u82.21.80i
BOOT 0.5.f.1
I HAVE SMART CLIP V2.26
SMARTMOTO V 1.23
CAN I UNLOCK IT
AND HOW
THX IN ADV

I did the same c975 by put phone in bootloader mode and press unlock at sc.

phone powered on normaly did not work for me, but bootloader mode unlocked it in seconds.
and this was yesterday

GSM_Support · 01-23-2007, 14:53

The phone has to be powered ON for Smart-Clip unlock process, not in boot mode.

Best Regards
GSMServer team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

alhamde16 · 01-27-2007, 09:03

thanks alot to Mr.Tinkertrain and GSM_Support
for theire great support ihave unlocked the phone by the new cable and phone in normal boot
thx alot again

01-21-2007, 12:06	#1 (permalink)
alhamde16 Freak Poster Join Date: May 2004 Age: 48 Posts: 177 Member: 65863 Status: Offline Thanks Meter: 15	C975 Boot 0.5.f.1 I GOT A C975 r245_u82.21.80i BOOT 0.5.f.1 I HAVE SMART CLIP V2.26 SMARTMOTO V 1.23 CAN I UNLOCK IT AND HOW THX IN ADV

01-22-2007, 20:10	#7 (permalink)
sabby_singh Registered User Join Date: Dec 2004 Location: largest democratic country Posts: 801 Member: 100376 Status: Offline Sonork: 100.1591842 Thanks Meter: 150	sir,i tried to unlock c975 firmware R245_U_82.21.91I with patch file.it showing error D3 and unlocking failed now hone is not on. i've flashed it with C975_R24_U_80[1].2F.3B.00.02P_lp002C_full_flash.smf but i'm still not able to make on or unlock it plz. help me it's urgent Last edited by sabby_singh; 01-22-2007 at 20:52.

01-23-2007, 14:53	#12 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	The phone has to be powered ON for Smart-Clip unlock process, not in boot mode. Best Regards GSMServer team www.smart-clip.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com Last edited by GSM_Support; 01-23-2007 at 15:21.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
repaired pds on c975 0.6.1.2 now it boots up as 0.5.f.1 what next	moni108	Smart-Clip	15	05-25-2007 09:21
URGENT ABOUT C975 (fw ...91i) Boot 0.5.f.1 !!!	humbedj	Smart-Clip	0	12-21-2006 20:10
working solution for C975 boot loader 0.5.f.1,sw version not found	GOODNESS	Motorola P2k	1	12-20-2006 21:24
C975 bloader 0.5.F.1	thor_666	Smart-Clip	1	07-20-2006 12:39
c975 boot 0.5.F.1 cant unlock	marzaa	Smart-Clip	5	04-26-2006 09:47

01-21-2007, 12:15	#2 (permalink)
Antuk Insane Poster Join Date: Apr 2005 Location: Vilnius, Lithuania Age: 52 Posts: 89 Member: 133394 Status: Offline Thanks Meter: 18	I had the same phone, it is impossible to unlock it with your version of Smart-clip. You must have S-card, and it's unlocking with patch. With S-card, I unlocked it in a few minutes.

01-22-2007, 08:59	#3 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ alhamde16, If C975 r245_u82.21.80i original firmware version and the boot is 0.5.f.1, then you can unlock it with simple "One Button" method. If original firmware version was R245_U_82.21.91I then it can be unlocked with new version of Smart-Clip and SmartMoto. Best Regards Smart-clip team www.smart-clip.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

01-22-2007, 12:54	#4 (permalink)
alhamde16 Freak Poster Join Date: May 2004 Age: 48 Posts: 177 Member: 65863 Status: Offline Thanks Meter: 15	the original firmware is C975 r245_u82.21.80i but the boot was 6.1.2 and i downgreade it to 0.5.f.1 the phone is ok but i cant unlock it by pressing the unlock button the cable i use is the same to flashe it is that ok please help me

01-22-2007, 13:31	#5 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	Make sure that is not a FORCED BOOT MODE CABLE... Best Regards GSMServer team www.smart-clip.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

01-22-2007, 13:42	#6 (permalink)
Afzaal No Life Poster Join Date: Mar 2005 Location: lets See. Posts: 3,399 Member: 128918 Status: Offline Thanks Meter: 282	I use Force Boot Cable in Unlocking A1000. What Else we can do with this Cable??? BR.

01-23-2007, 08:45	#8 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ sabby_singh, Please show log file fromm unlock procedure. Best Regards Smart-clip team www.smart-clip.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

01-23-2007, 13:07	#10 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ alhamde16, you should use standard cable. Pinout can be found here:http://www.smart-clip.com/motorola_p...dard_cable.png Best Regards Smart-clip team www.smart-clip.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

01-27-2007, 09:03	#13 (permalink)
alhamde16 Freak Poster Join Date: May 2004 Age: 48 Posts: 177 Member: 65863 Status: Offline Thanks Meter: 15	thanks alot to Mr.Tinkertrain and GSM_Support for theire great support ihave unlocked the phone by the new cable and phone in normal boot thx alot again