E1070 stil a problem - GSM-Forum

Tinotenda · 01-20-2007, 07:19

here is my log guys

SmartMoto 2.15
S-Card: xxxxxxxxx Smart-Clip dongle, v 1.12, assigned Smart-Clip: xxxxxxxxx Europe, initializing... OK
Clip serial: xxxxxxxxx, version: 3.12, initializing... OK
Searching for phone... no phone found
Searching for phone... found Motorola Phone (E1070), getting test interface... OK
Model E1070
Firmware R252211LD_U_85.97.F11P
Switching to flash mode... OK [S Flash Rainbow POG]
Reading phone boot version... 6.81
Sending boot... OK
Performing backup to temporary file
Stored temporary backup to C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_F7661CFC8C8C2252.bk_
Backup OK
Erasing flash memory error 80
Searching for phone... found Motorola Phone (E1070), getting test interface... OK
Switching to flash mode... OK [S Flash Rainbow POG]
Reading phone boot version... 6.81
Sending boot... OK
Erasing flash memory OK
Sending firmware OK
Searching for phone... found S Blank Rainbow POG
Switching to flash mode... OK
Reading phone boot version... 3.10
Reading flash id... Intel - 28F256L18B (x2)
Phone group: E770,E1000,E1070,V3x,V975,V1050
Hardware IMEI: 356853xxxxxxxxx
WARNING! Your phone may not power on after downgrading firmware version. This phone can be unlocked only via patching.
Security area saved to "PDS for S Blank Rainbow POG xxxxxxxxx (1).mbk"
Performing restore from temparary backup file C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_F7661CFC8C8C2252.bk_
Restore OK
Unlocking phone... OK

But phone stil very much locked....

GSM_Support · 01-20-2007, 12:28

What do you think is this message for?

Quote:

WARNING! Your phone may not power on after downgrading firmware version. This phone can be unlocked only via patching.

Best Regards
GSMServer team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

amirkaaal · 01-20-2007, 15:44

if we flash it then is lock open or not

damabib · 01-20-2007, 19:02

same story here ....can we do via tp....loader 681

Tinotenda · 01-22-2007, 06:59

Quote:

Originally Posted by GSM_Support

What do you think is this message for?

Best Regards
GSMServer team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

where is the patch file then?

Cant see any option on smartmoto about E1070 patching

Mr.Tinkertrain · 01-22-2007, 08:21

If such message appears (WARNING! Your phone may not power on after downgrading firmware version. This phone can be unlocked only via patching.), then this phone can not be unlocked at this moment.
Please wait for new updates.

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

01-20-2007, 07:19	#1 (permalink)
Tinotenda No Life Poster Join Date: Dec 2003 Location: Harare, Zimbabwe/ South Africa Age: 44 Posts: 1,110 Member: 46546 Status: Offline Sonork: 100.1577435 Thanks Meter: 85	E1070 stil a problem here is my log guys SmartMoto 2.15 S-Card: xxxxxxxxx Smart-Clip dongle, v 1.12, assigned Smart-Clip: xxxxxxxxx Europe, initializing... OK Clip serial: xxxxxxxxx, version: 3.12, initializing... OK Searching for phone... no phone found Searching for phone... found Motorola Phone (E1070), getting test interface... OK Model E1070 Firmware R252211LD_U_85.97.F11P Switching to flash mode... OK [S Flash Rainbow POG] Reading phone boot version... 6.81 Sending boot... OK Performing backup to temporary file Stored temporary backup to C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_F7661CFC8C8C2252.bk_ Backup OK Erasing flash memory error 80 Searching for phone... found Motorola Phone (E1070), getting test interface... OK Switching to flash mode... OK [S Flash Rainbow POG] Reading phone boot version... 6.81 Sending boot... OK Erasing flash memory OK Sending firmware OK Searching for phone... found S Blank Rainbow POG Switching to flash mode... OK Reading phone boot version... 3.10 Reading flash id... Intel - 28F256L18B (x2) Phone group: E770,E1000,E1070,V3x,V975,V1050 Hardware IMEI: 356853xxxxxxxxx WARNING! Your phone may not power on after downgrading firmware version. This phone can be unlocked only via patching. Security area saved to "PDS for S Blank Rainbow POG xxxxxxxxx (1).mbk" Performing restore from temparary backup file C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_F7661CFC8C8C2252.bk_ Restore OK Unlocking phone... OK But phone stil very much locked....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
mobile ex 3.3 rev 1.7 fixed stil have a problem	bharat_3013	MXKEY Nokia Flasher and Unlocker (by Alim Hape)	83	04-18-2010 07:09
nokia 6303 big big problem stil cs problem	MR.MAMUN	MXKEY Nokia Flasher and Unlocker (by Alim Hape)	6	03-26-2010 14:15
vodafone 136/236 stil unlock problem?????????	hajukhan	FuriousGold	1	02-23-2010 07:53
e1070 unlock problem ???	bvj	Smart-Clip	23	12-27-2006 18:44
Stil problem k750 please wait	azuric	Sony Ericsson Hardware Repair	2	03-20-2006 23:26

01-20-2007, 15:44	#3 (permalink)
amirkaaal Freak Poster Join Date: Oct 2006 Location: kamran mobile pakistan Posts: 235 Member: 378820 Status: Offline Thanks Meter: 8	if we flash it then is lock open or not

01-20-2007, 19:02	#4 (permalink)
damabib No Life Poster Join Date: Jan 2005 Location: EVERYWHERE U GO Age: 46 Posts: 4,800 Member: 106026 Status: Offline Sonork: 100.77890 Thanks Meter: 127	same story here ....can we do via tp....loader 681

01-22-2007, 08:21	#6 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	If such message appears (WARNING! Your phone may not power on after downgrading firmware version. This phone can be unlocked only via patching.), then this phone can not be unlocked at this moment. Please wait for new updates. Best Regards Smart-clip team www.smart-clip.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com