fail to unlock V3r A.52 - GSM-Forum

chris2007 · 03-17-2009, 09:58

Code:

Clip serial: xxxxxxxxxxx, version: 4.08, initializing... OK
Searching for phone... found Motorola Phone (V3r), getting test interface... OK
Model V3r
Firmware R3443U2_G_0E.C0.17R
Switching to flash mode... OK [S Flash Neptune LTE2]
Reading phone boot version... A.52
Boot prepare... failed

Clip serial: xxxxxxxxxxx, version: 4.08, initializing... OK
Searching for phone... found Motorola Phone (V3r), getting test interface... OK
Model V3r
Firmware R3443U2_G_0E.C0.17R
Switching to flash mode... OK [S Flash Neptune LTE2]
Reading phone boot version... A.52
Boot prepare... failed

GSM_Support · 03-17-2009, 10:03

The models with boot version A.52 require to be connected using TP method.

Best Regards
GSMServer team

chris2007 · 03-17-2009, 10:09

i used TP method boot always fail...

GSM_Support · 03-17-2009, 10:19

In this case you didn't connect the TP properly or ever you got the wrong point.
If you perform all correctly, then SmartMoto detects the handset as "S Blank Neptune LTE", "S Blank"Paragon POG" or "S Blank Rainbow" and boot version should be indicated as 2.00 or 3.00.

Best Regards
GSMServer team

rana_ · 03-17-2009, 10:39

connect set smartclip with tp,sarch phone and go to unlock model select than press unlock tp wait 5-10 secend than desconnect tp......waiting for complect unlock phone....................try same way ur phone unlock 100%

chris2007 · 03-17-2009, 10:39

problems for wrong connect tp,i tp in the other end of the resistor

now phone successfully unlock

Code:

Clip serial: xxxxxxx, version: 4.08, initializing... OK
Searching for phone... found S Blank Neptune LTE2, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 3.00
io timeout
Clip serial: xxxxxxxxx, version: 4.08, initializing... OK
Searching for phone... found S Blank Neptune LTE2, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 3.00
Reading flash id... ST - M30L0R8000B0
Reading flash id/2... none, OK
Phone group: V235,V360,V360v,V3i,V3r,L7,L7e,L7v,L71,L72,L9,K1,U3,W5,W490,W510,Z3
Hardware IMEI: 354519010848621
IMEI OTP status: locked
Security area saved to "PDS for S Blank Neptune LTE2 354519010848621.mbk"
Unlocking phone... OK
Turning phone off...  OK

GSM_Support · 03-17-2009, 11:38

Glad to know it. The thread can be closed now.

Best Regards
GSMServer team

03-17-2009, 10:19	#4 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	In this case you didn't connect the TP properly or ever you got the wrong point. If you perform all correctly, then SmartMoto detects the handset as "S Blank Neptune LTE", "S Blank"Paragon POG" or "S Blank Rainbow" and boot version should be indicated as 2.00 or 3.00. Best Regards GSMServer team Last edited by GSM_Support; 03-17-2009 at 10:29.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to unlock V3R - by Viru	viru	Motorola P2K (USB-Smart)	40	07-11-2011 13:36
How to unlock V3r	ufo_all	Motorola P2k	8	05-13-2008 21:18
How to unlock V3r bootloader 0A.52 !	lv99clck	Ultima Box Light	19	10-19-2007 12:25
unlock v3r 0A.52 R4515_G_08.BD.43R	abros	Smart-Clip	8	12-20-2006 19:48
How To Unlock V3r With P2k Easy Tool	::gsmcoder::	Motorola P2k	0	07-26-2006 19:56

03-17-2009, 10:03	#2 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	The models with boot version A.52 require to be connected using TP method. Best Regards GSMServer team

03-17-2009, 10:09	#3 (permalink)
chris2007 No Life Poster Join Date: Feb 2007 Posts: 3,197 Member: 453916 Status: Offline Sonork: 100.1620840 Thanks Meter: 246	i used TP method boot always fail...

03-17-2009, 10:39	#5 (permalink)
rana_ Freak Poster Join Date: Sep 2007 Location: BanglaDesh Posts: 451 Member: 597570 Status: Offline Sonork: 100.1590733 Thanks Meter: 159	connect set smartclip with tp,sarch phone and go to unlock model select than press unlock tp wait 5-10 secend than desconnect tp......waiting for complect unlock phone....................try same way ur phone unlock 100%

03-17-2009, 11:38	#7 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	Glad to know it. The thread can be closed now. Best Regards GSMServer team