k3 moto succes unlock removing emecon
 

here my logs


thanks to gsm server,,,,and lord guide me to remove emecon


SmartMoto 2.45
S-Card: 107****** Smart-Clip dongle, v 1.52, assigned Smart-Clip: 923***** Europe, initializing... OK
Clip serial: 923*******, version: 3.25, initializing... OK
Searching for phone... found S Flash Argon, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 4.10
Sending boot... OK
Processing data, 6 of 6 block...OK
Erasing flash memory OK
Sending firmware OK
Searching for phone... found S Flash Argon
Switching to flash mode... OK
Reading phone boot version... 0.00
Reading flash id... AMD - S29WS512P
Phone group: K3,M702iG,M702iS,V1100,V3xx,V6,V9
Hardware IMEI: 355848010******
IMEI OTP status: locked
Security area saved to "PDS for S Flash Argon 35584801******.mbk"
Performing restore from temparary backup file C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_18A3080844B6D051.bk_
Restore OK
Unlocking phone... OK






make work safe removing emecon.......

make work safe removing emecon.......so how did you do that for us
to succeed like you ,dont post logs your procedure on how to remove safely
is better to post:(...

i used microscope,,,nadle. and nail cuter...only



slowly pust nadle into emecon point to no.7 pins......

good job alvin



br
keaelite

moto k3 unlock
 

hi, can please tell me did you remove any glue or surrounding adhesive at test point location ? i cant seem to connect to testpoint

usb cable connected ok (to smclip)
red wire going to + battery connector
testpoint A wire (yellow)
black wire = nothing connected

am i do something wrong , thanks