Motorola V235 dead after unlock by Smart-Clip - GSM-Forum

emwugsm · 06-02-2006, 08:44

Hello. Yesterday I've got Motorola V235 handset to unlock - new one from Polkomtel PlusGSM Poland. Ofcause I've made the whole Test-Point procedure, as usual, and succesfully unlocked (also backuped language file). The mobile worked. Today the owner camed, and said that the phone went off by it self and there's no ability to power it on.

FW Version inside: R3512_G_0A.30.3FR

I would be very happy if someone had a backup of FW for this mobile. I've searched on Boot-Loader support and haven't found it

Best regards
eMWu^GSM

Mr.Tinkertrain · 06-02-2006, 08:48

Hello emwugsm,

Backup made by another Smart-Clip won't help You, because backup files can be used only with that Smart-Clip by which they were made.
As son as we will have files for this phone, we will upload them on boot-loader.com

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

emwugsm · 06-02-2006, 09:56

Thx for reply, i hope it will be in very near future. But if i have another working V235 handset could I use a backup from it for restoring the dead one (I have origional PDS Zone) ?

BR
eMWu^GSM

Mr.Tinkertrain · 06-02-2006, 10:04

@ emwugsm,

yes, You can flash the phone with backup file and after that that Restore Original Security Area.

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

gr8jaro · 08-31-2006, 00:54

Hello.I've got sema problem as emwugsm. After whole unlocking procedure by TP, i can't power up mobile, after insert baterry keypad just blink and tkats all, there's no posibility to power it up. I use SmartMoto version1.23, Clip version 2.26, and whole procedure looks ok, even at the end display communicate "unlock mobile...ok", but it'not... Please Help

GSM_Support · 09-01-2006, 15:17

Make sure that phone battery is fully charged, perform repair PDS & full flash.

Best Regards
GSMServer team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

gr8jaro · 09-02-2006, 00:14

I did that, i preformed repair PDS, afetr that i put full flash and still nothing, i use additional power suply 3,7 V... now my mobile is dead for good, not even blink, no connection with the clip. I check it on 2 diffrent Smart Clips and Victor no results... any ideas...
Would be thankfull for any help

Regards gr8jaro

06-02-2006, 08:44	#1 (permalink)
emwugsm Freak Poster Join Date: Oct 2004 Location: Poland - Lubin (DLU) Age: 36 Posts: 243 Member: 88545 Status: Offline Thanks Meter: 7	Motorola V235 dead after unlock by Smart-Clip Hello. Yesterday I've got Motorola V235 handset to unlock - new one from Polkomtel PlusGSM Poland. Ofcause I've made the whole Test-Point procedure, as usual, and succesfully unlocked (also backuped language file). The mobile worked. Today the owner camed, and said that the phone went off by it self and there's no ability to power it on. FW Version inside: R3512_G_0A.30.3FR I would be very happy if someone had a backup of FW for this mobile. I've searched on Boot-Loader support and haven't found it Best regards eMWu^GSM

06-02-2006, 08:48	#2 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	Hello emwugsm, Backup made by another Smart-Clip won't help You, because backup files can be used only with that Smart-Clip by which they were made. As son as we will have files for this phone, we will upload them on boot-loader.com Best Regards Smart-clip team www.smart-clip.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com Last edited by Mr.Tinkertrain; 06-02-2006 at 15:27.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
c139 dead after unlock in smart clip	deepak pahwa	Smart-Clip	2	04-20-2008 06:28
K1 Dead after unlock with Smart-clip	.::MoBiLeDoC::.	Smart-Clip	65	09-22-2007 10:37
Motorola E770 no netword after unlocked by smart-clip	manou_patou	Motorola P2k	4	09-06-2006 21:21
Need Help V975 Dead After Unlocking With Smart Clip	::.::SOUFIZ GSM::.::	Motorola P2k	13	09-04-2005 17:01
v70 dead after unlocking by pateriot clip	mobidoc	Motorola P2k	14	11-19-2002 23:08

06-02-2006, 09:56	#3 (permalink)
emwugsm Freak Poster Join Date: Oct 2004 Location: Poland - Lubin (DLU) Age: 36 Posts: 243 Member: 88545 Status: Offline Thanks Meter: 7	Thx for reply, i hope it will be in very near future. But if i have another working V235 handset could I use a backup from it for restoring the dead one (I have origional PDS Zone) ? BR eMWu^GSM

06-02-2006, 10:04	#4 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ emwugsm, yes, You can flash the phone with backup file and after that that Restore Original Security Area. Best Regards Smart-clip team www.smart-clip.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

08-31-2006, 00:54	#5 (permalink)
gr8jaro Junior Member Join Date: Feb 2006 Location: Poland Age: 45 Posts: 21 Member: 231958 Status: Offline Thanks Meter: 0	Hello.I've got sema problem as emwugsm. After whole unlocking procedure by TP, i can't power up mobile, after insert baterry keypad just blink and tkats all, there's no posibility to power it up. I use SmartMoto version1.23, Clip version 2.26, and whole procedure looks ok, even at the end display communicate "unlock mobile...ok", but it'not... Please Help

09-01-2006, 15:17	#6 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	Make sure that phone battery is fully charged, perform repair PDS & full flash. Best Regards GSMServer team www.smart-clip.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

09-02-2006, 00:14	#7 (permalink)
gr8jaro Junior Member Join Date: Feb 2006 Location: Poland Age: 45 Posts: 21 Member: 231958 Status: Offline Thanks Meter: 0	I did that, i preformed repair PDS, afetr that i put full flash and still nothing, i use additional power suply 3,7 V... now my mobile is dead for good, not even blink, no connection with the clip. I check it on 2 diffrent Smart Clips and Victor no results... any ideas... Would be thankfull for any help Regards gr8jaro