t303 prepare faild - GSM-Forum

piracik · 03-05-2009, 12:49

Hi

T303 unlock -> failed
first prepare OK secound prepare faild

once managed to make both prepare OK but writing faild ;/

think ther's something wrong with connection (on SW) as i've chacked on two diffrent cables

Phone info:
SW: R2CA005
1209-8242
EROM:
CXC 12506 16_R5A036

Quote:

SmartMoto 3.20
S-Card: ******* Smart-Clip dongle, v 2.10, assigned Smart-Clip: ******** Europe, initializing... OK
Waiting for the phone to power on...OK
Sending boot...0xA007 failed
Waiting for the phone to power on...OK
Sending boot...OK
0x8E
reading phone info failed
Preparing... 0x8E
failed
Turning phone off
Waiting for the phone to power on...OK
Sending boot...0xA007 failed
Waiting for the phone to power on...OK
Sending boot...OK
Hardware IMEI: 3577***********
Manufacturer: Intel, Model: M18LR256B
Preparing...failed
Turning phone off
Waiting for the phone to power on...OK
Sending boot...OK
Hardware IMEI: 3577**********
Manufacturer: Intel, Model: M18LR256B
Preparing...failed
Turning phone off
Waiting for the phone to power on...OK
Sending boot...OK
Turning phone off
Waiting for the phone to power on...OK
Sending boot...OK
Hardware IMEI: 3577*********
Manufacturer: Intel, Model: M18LR256B
Preparing...failed
Turning phone off

Any tip ??

MGT SOFTWARE · 03-05-2009, 13:46

this is new chip try to use se tool3 by server it cost 2 credit

mcandre · 03-05-2009, 15:47

Quote:

Phone info:
SW: R2CA005
1209-8242
EROM:
CXC 12506 16_R5A036

The phone could be already patched by some software - so it can cause such errors.
Try to reflash this phone and repeat unlocking process once again.
Post result here.

chris2007 · 03-06-2009, 07:47

Quote:

Originally Posted by piracik

Hi

T303 unlock -> failed
first prepare OK secound prepare faild

once managed to make both prepare OK but writing faild ;/

think ther's something wrong with connection (on SW) as i've chacked on two diffrent cables

Phone info:
SW: R2CA005
1209-8242
EROM:
CXC 12506 16_R5A036

Any tip ??

what cable that you used??

i have DCU 60 should i used it??

maximas007 · 03-06-2009, 08:09

MGT SOFTWARE is right u need setool to unlock with atleast 3 credits but only 2 credits will be consumed smart clip dosent support this new security

mcandre · 03-06-2009, 11:14

Have somebody tried changing firmware version and unlocking afterwards?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ericsson GA628 preparation	phonebusiness	GSM Programming & Reverse Engineering	10	12-05-2023 04:43
t303 unlocked t303 SUCCESSFUL	delchoni	Infinity-Box	5	06-04-2009 18:42
T303 unlock faild...	teleflexs	Smart-Clip	1	03-14-2009 09:18
Can't prepare dump of Acer G620?	olegario	Acer	2	05-21-2003 09:42
Error: Cannot prepare phone [8210]	laxxe	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	27	09-22-2002 22:29

03-05-2009, 13:46	#2 (permalink)
MGT SOFTWARE No Life Poster Join Date: Feb 2004 Location: Dar es Salaam TANZANIA Posts: 2,221 Member: 53263 Status: Offline Sonork: gsm master Thanks Meter: 326	this is new chip try to use se tool3 by server it cost 2 credit

03-06-2009, 08:09	#5 (permalink)
maximas007 Freak Poster Join Date: Jan 2007 Location: India.Pin.629001 Posts: 456 Member: 433257 Status: Offline Thanks Meter: 43	MGT SOFTWARE is right u need setool to unlock with atleast 3 credits but only 2 credits will be consumed smart clip dosent support this new security

03-06-2009, 11:14	#6 (permalink)
mcandre No Life Poster Join Date: Mar 2006 Location: Central Europe Age: 39 Posts: 11,877 Member: 239548 Status: Offline Thanks Meter: 2,781	Have somebody tried changing firmware version and unlocking afterwards?