Unlock "Phone Model"
 

Help! Whats the "Phone Model" of V300, there is no in the List

@ Lhick,

this phone can be unlocked using Simple "One Button" method.

Standard unlock procedure for P2K models
1. Power on the Smart-Clip from power adapter and E/G indicator will light green.
2. Power on the phone without SIM card and flash card (if present).
3. Connect the phone to Smart-Clip and press the "Unlock" button (red on older Clips).
4. E/G indicator will light green and go off, the phone will switch off (some models will automatically turn on then).
5. E/G will light green on success or red on error.
6. Successful unlock resets User Code to 1234, Security Code to 000000.

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

Sorry I didnt try it first, I just go to PC...

Gr8 team wat does it mean?

Searching for phone... found Motorola Phone (V300), getting test interface... OK
Model V300
Firmware TRIPLETS_G_0B.08.A5R_A
Switching to flash mode... OK [S Flash Neptune LTE]
Reading phone boot version... 7.60
Reading flash id... Intel - 28F128L18B
Reading flash id/2... Intel - 28F128L18T, OK
Phone group: V30x,V40x,V50x,V52x,V60x
Hardware IMEI: 353104006738622
IMEI OTP status: locked
Security area saved to "PDS for Motorola V300 353104006738622.mbk"
Current phone does not correspond model selection

BR

try to use simple unlock button of smartclip no need PC...

OLD boot version 7.60...

Bro I could not get u,,,where is simple button,,there is just 1 button ( Unlock Via TP) n wat do u mean by no need pc,,plz tell me more if u can,,thanx

BR

hotman, you should perform steps as was mentioned by Mr.Tinkertrain more than 4years ago!

simple button (one button, unlock button ...) is here:
http://img228.imageshack.us/img228/2489/img215b.jpg

lolz,,,thanx for the giant pic,,,but that i pressed nothing happened,,or it needs rj45 cable to connect or with same usb cable will work ?

BR

u only need the same usb cable plugged into the smart clip usb jack and to press the unlock button (phone must be on)

BR;)

@paffka

@FREEGuille

Yes thanx for helping me,,its done 100% successfully.

BR