Unlock "Phone Model" - GSM-Forum

Lhick · 12-05-2006, 10:23

Help! Whats the "Phone Model" of V300, there is no in the List

Mr.Tinkertrain · 12-05-2006, 10:31

@ Lhick,

this phone can be unlocked using Simple "One Button" method.

Standard unlock procedure for P2K models
1. Power on the Smart-Clip from power adapter and E/G indicator will light green.
2. Power on the phone without SIM card and flash card (if present).
3. Connect the phone to Smart-Clip and press the "Unlock" button (red on older Clips).
4. E/G indicator will light green and go off, the phone will switch off (some models will automatically turn on then).
5. E/G will light green on success or red on error.
6. Successful unlock resets User Code to 1234, Security Code to 000000.

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

Lhick · 12-05-2006, 11:19

Sorry I didnt try it first, I just go to PC...

mobile_hotman · 04-10-2011, 16:40

Gr8 team wat does it mean?

Searching for phone... found Motorola Phone (V300), getting test interface... OK
Model V300
Firmware TRIPLETS_G_0B.08.A5R_A
Switching to flash mode... OK [S Flash Neptune LTE]
Reading phone boot version... 7.60
Reading flash id... Intel - 28F128L18B
Reading flash id/2... Intel - 28F128L18T, OK
Phone group: V30x,V40x,V50x,V52x,V60x
Hardware IMEI: 353104006738622
IMEI OTP status: locked
Security area saved to "PDS for Motorola V300 353104006738622.mbk"
Current phone does not correspond model selection

BR

jakoy · 04-10-2011, 16:53

try to use simple unlock button of smartclip no need PC...

OLD boot version 7.60...

mobile_hotman · 04-10-2011, 17:20

Quote:

Originally Posted by jakoy

try to use simple unlock button of smartclip no need PC...

OLD boot version 7.60...

Bro I could not get u,,,where is simple button,,there is just 1 button ( Unlock Via TP) n wat do u mean by no need pc,,plz tell me more if u can,,thanx

BR

paffka · 04-11-2011, 07:41

hotman, you should perform steps as was mentioned by Mr.Tinkertrain more than 4years ago!

simple button (one button, unlock button ...) is here:

mobile_hotman · 04-11-2011, 16:48

Quote:

Originally Posted by paffka

hotman, you should perform steps as was mentioned by Mr.Tinkertrain more than 4years ago!

simple button (one button, unlock button ...) is here:

lolz,,,thanx for the giant pic,,,but that i pressed nothing happened,,or it needs rj45 cable to connect or with same usb cable will work ?

BR

FREEGuille · 04-11-2011, 20:18

Quote:

Originally Posted by mobile_hotman

lolz,,,thanx for the giant pic,,,but that i pressed nothing happened,,or it needs rj45 cable to connect or with same usb cable will work ?

BR

u only need the same usb cable plugged into the smart clip usb jack and to press the unlock button (phone must be on)

BR

mobile_hotman · 04-12-2011, 16:14

@paffka

@FREEGuille

Yes thanx for helping me,,its done 100% successfully.

BR

12-05-2006, 10:23	#1 (permalink)
Lhick No Life Poster Join Date: Aug 2006 Location: InsideOut Posts: 5,657 Member: 333359 Status: Offline Thanks Meter: 91	Unlock "Phone Model" Help! Whats the "Phone Model" of V300, there is no in the List

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
after E900 UNLOCKING "Phone Locked Return of service"Help plz	pakstar	Trident/AGERE Platform	6	09-06-2009 01:32
after E900 UNLOCKING "Phone Locked Return of service"Help plz	pakstar	Basic Micro-Box Software Support (SAMSUNG, HUAWEI, etc...)	7	12-02-2008 12:09
C300 after unlock "phone locked return for servicing"	qbom	NSPRO	5	05-01-2007 17:44
unable to unlock "Phone freezed" in ZV10	ASHIF	UST Pro II	6	06-23-2006 19:38
How to unlock "Phone Disabled" S4 ???	KisaKot	x1x to x45/x50	0	08-21-2002 06:01

12-05-2006, 10:31	#2 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ Lhick, this phone can be unlocked using Simple "One Button" method. Standard unlock procedure for P2K models 1. Power on the Smart-Clip from power adapter and E/G indicator will light green. 2. Power on the phone without SIM card and flash card (if present). 3. Connect the phone to Smart-Clip and press the "Unlock" button (red on older Clips). 4. E/G indicator will light green and go off, the phone will switch off (some models will automatically turn on then). 5. E/G will light green on success or red on error. 6. Successful unlock resets User Code to 1234, Security Code to 000000. Best Regards Smart-clip team www.smart-clip.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

12-05-2006, 11:19	#3 (permalink)
Lhick No Life Poster Join Date: Aug 2006 Location: InsideOut Posts: 5,657 Member: 333359 Status: Offline Thanks Meter: 91	Sorry I didnt try it first, I just go to PC...

04-10-2011, 16:40	#4 (permalink)
mobile_hotman No Life Poster Join Date: Dec 2005 Location: IN_BATTLE_FIELD. Posts: 3,224 Member: 214340 Status: Offline Thanks Meter: 906	Gr8 team wat does it mean? Searching for phone... found Motorola Phone (V300), getting test interface... OK Model V300 Firmware TRIPLETS_G_0B.08.A5R_A Switching to flash mode... OK [S Flash Neptune LTE] Reading phone boot version... 7.60 Reading flash id... Intel - 28F128L18B Reading flash id/2... Intel - 28F128L18T, OK Phone group: V30x,V40x,V50x,V52x,V60x Hardware IMEI: 353104006738622 IMEI OTP status: locked Security area saved to "PDS for Motorola V300 353104006738622.mbk" Current phone does not correspond model selection BR

04-10-2011, 16:53	#5 (permalink)
jakoy No Life Poster Join Date: Aug 2002 Location: Island Garden City Of Samal,Ph Posts: 1,971 Member: 14852 Status: Offline Sonork: 100.1608716 Thanks Meter: 503	try to use simple unlock button of smartclip no need PC... OLD boot version 7.60...

04-11-2011, 07:41	#7 (permalink)
paffka No Life Poster Join Date: Dec 2005 Posts: 859 Member: 212116 Status: Offline Thanks Meter: 178	hotman, you should perform steps as was mentioned by Mr.Tinkertrain more than 4years ago! simple button (one button, unlock button ...) is here:

04-12-2011, 16:14	#10 (permalink)
mobile_hotman No Life Poster Join Date: Dec 2005 Location: IN_BATTLE_FIELD. Posts: 3,224 Member: 214340 Status: Offline Thanks Meter: 906	@paffka @FREEGuille Yes thanx for helping me,,its done 100% successfully. BR