V3 with Boot Loader 0A.30 SW 0E.C0.13R from T-Mobile how to unlock? Dead Phone - GSM-Forum

DJiCE · 11-17-2006, 21:44

Hello. My name's Paul. I get a V3 from T-Mobile, Bootloader is 0A.30, SW Version from the label is 0E.C0.13R. I tried to unlock this one with smart clip choosing V3R and i get a message " Firmware version not supported ", then i unlocked this one with P2K Cracked choosing V3R option and making the testpoint. After unlock, phone never turn on again.

I did a Repair PDS with Smart Moto choosing V3R model and flashed it with V3r_R4515_G_08.BD.44R_lp002E_full_flash.smf from Boot-loader.com but the phone now power on and show the boot loader screen:

Boot Loader
0A.30.
SW Version:
R4515_G_08.BD.20I_GNPO_1_RFD
I

OK to Program
Connect USB
Data Cable

I attach the picture of the phone screen

Thanks for reading... Help!

GreenCheese · 11-17-2006, 23:38

Thats V3r you need to unlock via TestPoint.

DJiCE · 11-18-2006, 03:42

Yes i did test point for this model... wtf ?? is this a V3R ?? or another type of V3?

Mr.Tinkertrain · 11-18-2006, 10:59

@ DJiCE,

what firmware version the phone originally had?
Full name.

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

chowdary · 11-18-2006, 16:13

Quote:

Originally Posted by DJiCE

Hello. My name's Paul. I get a V3 from T-Mobile, Bootloader is 0A.30, SW Version from the label is 0E.C0.13R. I tried to unlock this one with smart clip choosing V3R and i get a message " Firmware version not supported ", then i unlocked this one with P2K Cracked choosing V3R option and making the testpoint. After unlock, phone never turn on again.

I did a Repair PDS with Smart Moto choosing V3R model and flashed it with V3r_R4515_G_08.BD.44R_lp002E_full_flash.smf from Boot-loader.com but the phone now power on and show the boot loader screen:

Boot Loader
0A.30.
SW Version:
R4515_G_08.BD.20I_GNPO_1_RFD
I

OK to Program
Connect USB
Data Cable

I attach the picture of the phone screen

Thanks for reading... Help!

reflash it again and tick the box "overwrite bootarea"
br

CHAPRAN · 11-20-2006, 09:12

Quote:

Originally Posted by DJiCE

Hello. My name's Paul. I get a V3 from T-Mobile, Bootloader is 0A.30, SW Version from the label is 0E.C0.13R. I tried to unlock this one with smart clip choosing V3R and i get a message " Firmware version not supported ", then i unlocked this one with P2K Cracked choosing V3R option and making the testpoint. After unlock, phone never turn on again.

I did a Repair PDS with Smart Moto choosing V3R model and flashed it with V3r_R4515_G_08.BD.44R_lp002E_full_flash.smf from Boot-loader.com but the phone now power on and show the boot loader screen:

Boot Loader
0A.30.
SW Version:
R4515_G_08.BD.20I_GNPO_1_RFD
I

OK to Program
Connect USB
Data Cable

I attach the picture of the phone screen

Thanks for reading... Help!

cant reflash it

SmartMoto 1.23
Clip serial: XXXXXXXXX, version: 2.26, initializing... OK
Searching for phone... found S Flash Neptune LTE2, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... A.30
Boot prepare... failed
Reading phone boot version... io timeout
Reading phone boot version... io timeout
Reading phone boot version... io timeout
Searching for phone... found S Flash Neptune LTE2, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... A.30
Boot prepare... failed
Reading phone boot version... io timeout
Reading phone boot version... io timeout
Reading phone boot version... io timeout

phone org Boot Version: 0A.52

Mr.Tinkertrain · 11-20-2006, 09:58

@ CHAPRAN,

Boot version 0A.52 currently not supported.

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

CHAPRAN · 11-20-2006, 12:20

Quote:

Originally Posted by Mr.Tinkertrain

@ CHAPRAN,

Boot version 0A.52 currently not supported.

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

ok................how to bring back,,, i have all backup,phone is dicticed without test point
please help Mr.Tinkertrain

Mr.Tinkertrain · 11-20-2006, 13:42

@ CHAPRAN,

If you have made a backup, you can try to flash the phone with it.

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

NOKIA127 · 11-20-2006, 17:08

But with Tp ?

SmartMoto 1.23
Clip serial: XXXXXXXXX, version: 2.26, initializing... OK
Searching for phone... found S Flash Neptune LTE2, getting test interface... interface not found
Switching to flash mode... OK

Reading phone boot version... A.30

Nokia127

CHAPRAN · 11-21-2006, 06:23

Quote:

Originally Posted by NOKIA127

But with Tp ?

SmartMoto 1.23
Clip serial: XXXXXXXXX, version: 2.26, initializing... OK
Searching for phone... found S Flash Neptune LTE2, getting test interface... interface not found
Switching to flash mode... OK

Reading phone boot version... A.30

Nokia127

I bring it back with tp

Mr.Tinkertrain · 11-21-2006, 10:11

@ NOKIA127,

please specify what firmware version the phone has?

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

DJiCE · 11-21-2006, 18:39

When will be a solution for new firmware V3 Grey phones?? i need the solution, have 2 dead phones from good clients...

Mr.Tinkertrain · 11-22-2006, 10:02

@ DJiCE,

Please specify what boot and firmware versions it has?

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

4 u man · 11-22-2006, 15:23

Hi pls help me i was unlocking v3 bootlodar 8.26 when i was re moving the rsa it got an error and die s/w 0E.42.09R_A now its dead m posting the log below .

SmartMoto 1.23
Clip serial: xxxxxxxxx, version: 2.26, initializing... OK
Searching for phone... found S Blank Neptune LTE, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 0.FF
Reading flash id... Intel-28F256L18B
Phone group: A630,E1,E37x,E39x,E55x,L6,U6,V3,V190,V330,V53x,V54 x,V55x,V62x,V635,V80
Hardware IMEI: 359804005442316
Security area saved to "S Blank Neptune LTE 359804005442316.pds"
Login request... OK
Writing section0 done
Writing section1 done
Writing section2 done
Writing section3 done
Restarting phone... OK
Searching for phone... found S Blank Neptune LTE
Switching to flash mode... OK
Repair PDS request... OK
Performing PDS repair... OK
Please write a corresponding Full_flash file to phone to accomplish repair

after rehoting the bord ads fixing pds log now is below.

SmartMoto 1.23
Clip serial: xxxxxxxxx, version: 2.26, initializing... OK
Searching for phone... found S Blank Neptune LTE, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 2.00
Reading flash id... Intel-28F256L18B
Phone group: A630,E1,E37x,E39x,E55x,L6,U6,V3,V190,V330,V53x,V54 x,V55x,V62x,V635,V80
Hardware IMEI: 359804005442316
Security area saved to "S Blank Neptune LTE 359804005442316 (5).pds"
Login request... OK
Writing section0 done
Writing section1 done
Writing section2 done
Writing section3 done
Restarting phone... OK
Searching for phone... found S Blank Neptune LTE
Switching to flash mode... OK
Repair PDS request... OK
Performing PDS repair... OK
Please write a corresponding Full_flash file to phone to accomplish repair

the funy thing is look at the boot version inthe first log is......0.FF ANS IN TH E 2ND ONE IS boot version... 2.00

I NEED HELP TO REVIVE THIS PHONE I NEED A FULL FLASH FOR V3 S/W :0E.42.09R_A PLEASE IF YOU HAVE IT POST OR GAVE THE LINK THANKS .

11-20-2006, 13:42	#9 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ CHAPRAN, If you have made a backup, you can try to flash the phone with it. Best Regards Smart-clip team www.smart-clip.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com Last edited by Mr.Tinkertrain; 11-22-2006 at 10:01.

11-22-2006, 15:23	#15 (permalink)
4 u man Freak Poster Join Date: Jul 2004 Location: JATT LABLE Age: 43 Posts: 461 Member: 73479 Status: Offline Sonork: 100.1581683 Thanks Meter: 55	@Mr.Tinkertrain Hi pls help me i was unlocking v3 bootlodar 8.26 when i was re moving the rsa it got an error and die s/w 0E.42.09R_A now its dead m posting the log below . SmartMoto 1.23 Clip serial: xxxxxxxxx, version: 2.26, initializing... OK Searching for phone... found S Blank Neptune LTE, getting test interface... interface not found Switching to flash mode... OK Reading phone boot version... 0.FF Reading flash id... Intel-28F256L18B Phone group: A630,E1,E37x,E39x,E55x,L6,U6,V3,V190,V330,V53x,V54 x,V55x,V62x,V635,V80 Hardware IMEI: 359804005442316 Security area saved to "S Blank Neptune LTE 359804005442316.pds" Login request... OK Writing section0 done Writing section1 done Writing section2 done Writing section3 done Restarting phone... OK Searching for phone... found S Blank Neptune LTE Switching to flash mode... OK Repair PDS request... OK Performing PDS repair... OK Please write a corresponding Full_flash file to phone to accomplish repair after rehoting the bord ads fixing pds log now is below. SmartMoto 1.23 Clip serial: xxxxxxxxx, version: 2.26, initializing... OK Searching for phone... found S Blank Neptune LTE, getting test interface... interface not found Switching to flash mode... OK Reading phone boot version... 2.00 Reading flash id... Intel-28F256L18B Phone group: A630,E1,E37x,E39x,E55x,L6,U6,V3,V190,V330,V53x,V54 x,V55x,V62x,V635,V80 Hardware IMEI: 359804005442316 Security area saved to "S Blank Neptune LTE 359804005442316 (5).pds" Login request... OK Writing section0 done Writing section1 done Writing section2 done Writing section3 done Restarting phone... OK Searching for phone... found S Blank Neptune LTE Switching to flash mode... OK Repair PDS request... OK Performing PDS repair... OK Please write a corresponding Full_flash file to phone to accomplish repair the funy thing is look at the boot version inthe first log is......0.FF ANS IN TH E 2ND ONE IS boot version... 2.00 I NEED HELP TO REVIVE THIS PHONE I NEED A FULL FLASH FOR V3 S/W :0E.42.09R_A PLEASE IF YOU HAVE IT POST OR GAVE THE LINK THANKS .

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to unlock V3 with boot loader 0A.52???	svchost	Smart-Clip	19	06-04-2009 09:50
v3v motorolla unlock with smartclip,boot loader[0a.30.sw version:r4515_g_08.bd62r.	ballybaka	Smart-Clip	23	07-15-2008 16:14
v3 with boot loader 0A.30	GSM PAVIA	Motorola P2k	19	08-18-2006 10:57
v3v motorolla unlock with smartclip,boot loader[0a.30.sw version:r4515_g_08.bd62r.	ballybaka	Smart-Clip	0	07-08-2006 16:04

11-17-2006, 23:38	#2 (permalink)
GreenCheese No Life Poster Join Date: Jan 2006 Location: Rock'n in the Free-World Age: 53 Posts: 686 Member: 226496 Status: Offline Thanks Meter: 11	Thats V3r you need to unlock via TestPoint.

11-18-2006, 03:42	#3 (permalink)
DJiCE Freak Poster Join Date: Nov 2004 Posts: 358 Member: 93339 Status: Offline Thanks Meter: 27	Yes i did test point for this model... wtf ?? is this a V3R ?? or another type of V3?

11-18-2006, 10:59	#4 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ DJiCE, what firmware version the phone originally had? Full name. Best Regards Smart-clip team www.smart-clip.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

11-20-2006, 09:58	#7 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ CHAPRAN, Boot version 0A.52 currently not supported. Best Regards Smart-clip team www.smart-clip.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

11-20-2006, 17:08	#10 (permalink)
NOKIA127 No Life Poster Join Date: Jan 2004 Location: Quito Ecuador Posts: 617 Member: 50969 Status: Offline Thanks Meter: 56	But with Tp ? SmartMoto 1.23 Clip serial: XXXXXXXXX, version: 2.26, initializing... OK Searching for phone... found S Flash Neptune LTE2, getting test interface... interface not found Switching to flash mode... OK Reading phone boot version... A.30 Nokia127

11-21-2006, 10:11	#12 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ NOKIA127, please specify what firmware version the phone has? Best Regards Smart-clip team www.smart-clip.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

11-21-2006, 18:39	#13 (permalink)
DJiCE Freak Poster Join Date: Nov 2004 Posts: 358 Member: 93339 Status: Offline Thanks Meter: 27	When will be a solution for new firmware V3 Grey phones?? i need the solution, have 2 dead phones from good clients...

11-22-2006, 10:02	#14 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ DJiCE, Please specify what boot and firmware versions it has? Best Regards Smart-clip team www.smart-clip.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com