V3r dead

[mihnea_gsm]

Hy, have this two V3r motorola phones that was dameged on unloking.

SmartMoto 1.19
Clip serial: xxxxxxx version: 2.24, initializing... OK
Searching for phone... found S Blank Neptune LTE2, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 3.00
Reading flash id... 0x0090-0x0090
Phone group: V360,V360v,V3i,L7,L7v
Hardware IMEI: 87082FF3CDFC6F1
Unlocking phone... error A0

I saw teht imei was not read good, but dont have time to react.....Next step phone was dead

I managed to read a full flash from another V3r, do pds repair on this one, reflash the dead one with restore backup function. Now the phone will power up only in test mode or with tp. The phone is: boot 0A.30 and sw R4515_G_08.BD.43R.


When I flash it, software promt me that IMEi inside flash is difrent from otp IMEI... I tried to pach imei but for this operation the must be on (or that is how I understed).

Can you please upload a suitable mosterflash or some reflash that wiil bring this phone alive?

Thanx

[Mr.Tinkertrain]

Hello mihnea_gsm,

As I see from your log file Flash chip cn't be read properly!
Maybe it get damaged during Testpoint procedure.

As soon as we will get Flash files for this phone we will upload them on boot-loader.com

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

[bogdancirlogea]

Originally Posted by mihnea_gsm

Hy, have this two V3r motorola phones that was dameged on unloking.

SmartMoto 1.19
Clip serial: xxxxxxx version: 2.24, initializing... OK
Searching for phone... found S Blank Neptune LTE2, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 3.00
Reading flash id... 0x0090-0x0090
Phone group: V360,V360v,V3i,L7,L7v
Hardware IMEI: 87082FF3CDFC6F1
Unlocking phone... error A0

I saw teht imei was not read good, but dont have time to react.....Next step phone was dead

I managed to read a full flash from another V3r, do pds repair on this one, reflash the dead one with restore backup function. Now the phone will power up only in test mode or with tp. The phone is: boot 0A.30 and sw R4515_G_08.BD.43R.


When I flash it, software promt me that IMEi inside flash is difrent from otp IMEI... I tried to pach imei but for this operation the must be on (or that is how I understed).

Can you please upload a suitable mosterflash or some reflash that wiil bring this phone alive?


Thanx

Try to restore PDS area from backup.... maybe it work

[mihnea_gsm]

Many thanx for your qui reply. This is a real suport.
I realy don't want to opsed you or somenthing like that . Becose I herd that other users had problems and is an very long dispute, I do reasemble the phones after apling tp (I do it by resoldering becose with some models it take's a litle time befor jobs are done and it seems to me that batery stays more stable atached to phone) and test them if they work ( I did realy killed some when apling tp )
Why I asked for an *******fles- reflesh is that I revived some athor models kiled in unloking, by doing pds repair- *******flash- reflash procedure, and I know that unloking this new V3r's is on ower one risk only, until they are realy supported by a new update.
Anyhow... hope an up-date it will be soon ready.
Many thanks for your real suport and all that job you are doing to make this software work as good as it dose

Regards

[mihnea_gsm]

thanx.... firs thing tried

[phonetool]

.

now I can repair dead v3r

.

[musa_bahi]

i have v360 , unLoking problem band 850 to 1900 but i have convert to 900 to 1800 thanks advance

[musa_bahi]

help me arjent and Quick answer me.

[Mr.Tinkertrain]

@ musa_bahi,

Please explain in more details what problem you have.



Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com