V3t T-Mobile bootload A.52 unlocked via tp with smartmoto 3.12 - GSM-Forum

alfox · 03-31-2008, 11:10

heres another v3 series phone to be exact v3t with boot load A.52.just follow the new tp guide but just a little difference with v3r coz the capacitor's location is not the same.but almost the same....

LOGS:

Code:

SmartMoto 3.12
S-Card: alfox Smart-Clip dongle, v 2.07, assigned Smart-Clip: alfox Europe, initializing... OK
Clip serial: alfox, version: 4.07, initializing... OK
Searching for phone... found Motorola Phone (V3t), getting test interface... OK
Model V3t
Firmware R3443U5_G_0E.C8.0CR
Switching to flash mode... OK [S Flash Neptune LTE2]
Reading phone boot version... A.52
Boot prepare... failed
Searching for phone... found S Blank Neptune LTE2, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 3.00
Reading flash id... ST - M30L0R8000B0
Reading flash id/2... ST - M58LR128FT, OK
Phone group: V235,V360,V360v,V3i,V3r,L7,L7e,L7v,L71,L72,L9,K1,W5,W490,W510,Z3
Hardware IMEI: 3530140100alfox
IMEI OTP status: locked
Security area saved to "PDS for S Blank Neptune LTE2 353014010028672.mbk"
Unlocking phone... OK

sundar83 · 04-02-2008, 16:55

could u pls give the picture for u used tp.........................

Mr.Tinkertrain · 04-03-2008, 07:44

@ sundar83,

TP pictures for all supported phone models, including V3t, can be found at boot-loader.com, section Public Downloads->testpoints->...

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

sundar83 · 04-03-2008, 09:10

@Mr.Tinkertrain i searched already there tat model tp not available there........................

Mr.Tinkertrain · 04-03-2008, 09:27

@ sundar83,

TestPoint for this phone model is the same as for V3i, the board is the same.

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

sundar83 · 04-03-2008, 11:34

V3t unlock successfully using v3i tp here is the screen shot but signal is low after unlocking thx to @Mr.Tinkertrain....................

[img]http://gallery.*******************.com/main.php?g2_view=core.DownloadItem&g2_itemId=905&g 2_serialNumber=1[/img]

Lhick · 04-03-2008, 11:39

Quote:

Originally Posted by sundar83

@Mr.Tinkertrain i searched already there tat model tp not available there........................

You mean! the TP(Hardware):any conductor will do but for I use Tweezer, to do TP is simple:just connect the designated TP to Gnd!

Nurettin Duman · 04-03-2008, 17:34

connect the designated TP to Gnd!

alfox · 04-04-2008, 03:28

tp for v3t is almost the same with v3i but a little difference in the position of the capacitor where to hit the tp.just ****yze it...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
4 pcs. w156 unlocked with smartmoto 3.12 [REFERENCE]	alfox	Smart-Clip	17	03-15-2021 22:53
Successful Unlocked Via Tp With UB	MobilesDoctor	Universalbox	50	07-29-2010 10:03
pb with smartmoto 3.12	limsao	Smart-Clip	2	03-21-2008 15:53
v3r at&t unlocked via TP with smartmoto[reference]	alfox	Smart-Clip	0	02-15-2008 09:24

04-02-2008, 16:55	#2 (permalink)
sundar83 Freak Poster Join Date: Jan 2006 Location: india Age: 40 Posts: 424 Member: 223120 Status: Offline Thanks Meter: 131	could u pls give the picture for u used tp.........................

04-03-2008, 07:44	#3 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ sundar83, TP pictures for all supported phone models, including V3t, can be found at boot-loader.com, section Public Downloads->testpoints->... Best Regards Smart-clip team www.smart-clip.com www.scoutdongle.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

04-03-2008, 09:10	#4 (permalink)
sundar83 Freak Poster Join Date: Jan 2006 Location: india Age: 40 Posts: 424 Member: 223120 Status: Offline Thanks Meter: 131	@Mr.Tinkertrain i searched already there tat model tp not available there........................

04-03-2008, 09:27	#5 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ sundar83, TestPoint for this phone model is the same as for V3i, the board is the same. Best Regards Smart-clip team www.smart-clip.com www.scoutdongle.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

04-03-2008, 11:34	#6 (permalink)
sundar83 Freak Poster Join Date: Jan 2006 Location: india Age: 40 Posts: 424 Member: 223120 Status: Offline Thanks Meter: 131	V3t unlock successfully using v3i tp here is the screen shot but signal is low after unlocking thx to @Mr.Tinkertrain.................... [img]http://gallery.*******************.com/main.php?g2_view=core.DownloadItem&g2_itemId=905&g 2_serialNumber=1[/img]

04-03-2008, 17:34	#8 (permalink)
Nurettin Duman Registered User Join Date: Feb 2005 Location: Turkiye :islam Posts: 2,911 Member: 115596 Status: Offline Sonork: [email protected] Thanks Meter: 1,127	connect the designated TP to Gnd!

04-04-2008, 03:28	#9 (permalink)
alfox No Life Poster Join Date: Nov 2004 Location: Pinas Age: 45 Posts: 1,412 Member: 91411 Status: Offline Sonork: 100.1584444 Thanks Meter: 372	tp for v3t is almost the same with v3i but a little difference in the position of the capacitor where to hit the tp.just ****yze it...