V3xx Unlock Sucessfully With Smart Testpoint Method - GSM-Forum

maplegsm · 10-28-2007, 10:54

SmartMoto 2.42
S-Card: ......... Smart-Clip dongle, v 1.50, assigned Smart-Clip: ......... Europe, initializing... OK
Clip serial: ........., version: 3.25, initializing... OK
Searching for phone... found Motorola Phone (RAZRV3xx), getting test interface... OK
Model RAZRV3xx
Firmware R26111LD_U_96.66.72AR
Operation log saved to "C:\Program Files\GsmServer\SmartMoto\SmartMoto log 28-10-2007.txt"
Searching for phone... found Motorola Phone (RAZRV3xx), getting test interface... OK
Model RAZRV3xx
Firmware R26111LD_U_96.66.72AR
Switching to flash mode... OK [S Flash Argon]
Reading phone boot version... 3.02
Stored temporary backup to C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_11A3120A148FE050.bk_
Processing data, 6 of 6 block...OK
Searching for phone... found Motorola Phone (RAZRV3xx), getting test interface... OK
Switching to flash mode... OK [S Flash Argon]
Reading phone boot version... 3.02
Sending boot... OK
Erasing flash memory OK
Sending firmware OK
Searching for phone... found S Flash Argon
Switching to flash mode... OK
Reading phone boot version... 0.00
Reading flash id... AMD - S71WS512NE0
Reading flash id/2... AMD - S71WS512NE0, OK
Phone group: K3,M702iG,V1100,V3xx,V6
Hardware IMEI: ...............
IMEI OTP status: locked
Security area saved to "PDS for S Flash Argon ................mbk"
Performing restore from temparary backup file C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_11A3120A148FE050.bk_
Restore OK
Unlocking phone... OK
Turning phone off... OK

THANKS SMART MOTO

BR

MAPLE GSM (MAPLE COMMUNICATIONS)

avroy7 · 10-28-2007, 16:36

great!!!!!!!!!!!!
congrts!!!!!!!!!!!!!!!!
can u upload "smart test point"ckt for rj45?
thx

abdelhak_gsm · 10-28-2007, 16:58

ca n you plz explain how you make test point
i mean step by step

plz i need you help

Trooperx17 · 10-28-2007, 19:51

today I've unlocked one with success too!!

nice smart-clip!

maplegsm · 10-29-2007, 07:21

first your smart testpoint cable should be good and second read carefully manual 3rd dont mistake

Br
MAPLE GSM

playboy123 · 10-31-2007, 09:43

i cant seem to find right testpoint on v6 and v3xx on diagrams cam someone please help me

Mr.Tinkertrain · 10-31-2007, 09:54

@ playboy123,

All TP pictures can be found at www.boot-loader.com, section Public Downloads->testpoints->...

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

trieubk · 10-31-2007, 13:20

I've just unlocked one successfully , first i tried with TP cable (from unknown Team)--->no success, then tried with original smart TP cable (from SC Team)--->it worked fine

adebam · 11-01-2007, 09:12

my testpoint cable is from GP. Is this one okay? pls advice.

GSM_Support · 11-01-2007, 11:22

No, that one is not OK, use the original cables only.

Best Regards
GSMServer team

chowdary · 11-01-2007, 13:00

what about smart tp cable from I-PHONE
is it any good
has anybody tested it
it has got primary , secondary testpoint pins
ground and power clip
colours are
yellow (possibly primary)
green(possibly secondary)
res with crocodile clip (possibly ground)
black with black clip(possibly power)
these cables are sold in fonefunshop
has anybody tried this cable
or what does the smart clip team say about this cable
br

TICTAC_M · 11-01-2007, 14:44

Quote:

Originally Posted by chowdary

what about smart tp cable from I-PHONE
is it any good
has anybody tested it
it has got primary , secondary testpoint pins
ground and power clip
colours are
yellow (possibly primary)
green(possibly secondary)
res with crocodile clip (possibly ground)
black with black clip(possibly power)
these cables are sold in fonefunshop
has anybody tried this cable
or what does the smart clip team say about this cable
br

for ipmart cable color is:

green is tp A
yelow is tp B
red is positive
black is gnd

i try with one but do not work, now i have gsmserver cable and work very fine.

bobxxx · 11-01-2007, 21:10

I bought smart tp in gsmserver and it didn't work with V3re and W510, I haven't tested yet in V3xx.

GSM_Support · 11-02-2007, 11:09

If it didn't work with 2 phones in row, then check if you have performed the procedure correctly!

Best Regards
GSMServer team

polifon · 12-09-2007, 17:56

tp from ipmart work fine thx for info

Quote:

Originally Posted by TICTAC_M

for ipmart cable color is:

green is tp A
yelow is tp B
red is positive
black is gnd

i try with one but do not work, now i have gsmserver cable and work very fine.

10-28-2007, 10:54	#1 (permalink)
maplegsm No Life Poster Join Date: Nov 2006 Location: Bulgaria/China Age: 58 Posts: 4,312 Member: 391664 Status: Offline Sonork: Python Thanks Meter: 1,063	V3xx Unlock Sucessfully With Smart Testpoint Method SmartMoto 2.42 S-Card: ......... Smart-Clip dongle, v 1.50, assigned Smart-Clip: ......... Europe, initializing... OK Clip serial: ........., version: 3.25, initializing... OK Searching for phone... found Motorola Phone (RAZRV3xx), getting test interface... OK Model RAZRV3xx Firmware R26111LD_U_96.66.72AR Operation log saved to "C:\Program Files\GsmServer\SmartMoto\SmartMoto log 28-10-2007.txt" Searching for phone... found Motorola Phone (RAZRV3xx), getting test interface... OK Model RAZRV3xx Firmware R26111LD_U_96.66.72AR Switching to flash mode... OK [S Flash Argon] Reading phone boot version... 3.02 Stored temporary backup to C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_11A3120A148FE050.bk_ Processing data, 6 of 6 block...OK Searching for phone... found Motorola Phone (RAZRV3xx), getting test interface... OK Switching to flash mode... OK [S Flash Argon] Reading phone boot version... 3.02 Sending boot... OK Erasing flash memory OK Sending firmware OK Searching for phone... found S Flash Argon Switching to flash mode... OK Reading phone boot version... 0.00 Reading flash id... AMD - S71WS512NE0 Reading flash id/2... AMD - S71WS512NE0, OK Phone group: K3,M702iG,V1100,V3xx,V6 Hardware IMEI: ............... IMEI OTP status: locked Security area saved to "PDS for S Flash Argon ................mbk" Performing restore from temparary backup file C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_11A3120A148FE050.bk_ Restore OK Unlocking phone... OK Turning phone off... OK THANKS SMART MOTO BR MAPLE GSM (MAPLE COMMUNICATIONS)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
* Video Guide How To Unlock BB5 With New NCK Method Here *	mbcommunication	Cyclonebox	0	01-25-2010 16:40
v3x testpoint with smart testpoint	cingularv551	Smart-Clip	1	10-27-2008 08:17
Have anyone tried unlocking with Smart Testpoint Cable V2.0?	edong	Smart-Clip	16	02-08-2008 08:09
v3XX unlocking success w/ smart test point cable....	jakoy	Smart-Clip	2	10-11-2007 07:32
BEWARE! G_08.B7.AER motorolas DEAD after unlock with NO TESTPOINT method!	booreck	Smart-Clip	1	12-19-2006 19:40

10-28-2007, 16:36	#2 (permalink)
avroy7 Freak Poster Join Date: May 2006 Posts: 264 Member: 281223 Status: Offline Thanks Meter: 9	great!!!!!!!!!!!! congrts!!!!!!!!!!!!!!!! can u upload "smart test point"ckt for rj45? thx

10-28-2007, 16:58	#3 (permalink)
abdelhak_gsm Freak Poster Join Date: Mar 2007 Location: morocco/fes Posts: 447 Member: 463184 Status: Offline Thanks Meter: 64	ca n you plz explain how you make test point i mean step by step plz i need you help

10-28-2007, 19:51	#4 (permalink)
Trooperx17 No Life Poster Join Date: Dec 2005 Posts: 660 Member: 213638 Status: Offline Thanks Meter: 77	today I've unlocked one with success too!! nice smart-clip!

10-29-2007, 07:21	#5 (permalink)
maplegsm No Life Poster Join Date: Nov 2006 Location: Bulgaria/China Age: 58 Posts: 4,312 Member: 391664 Status: Offline Sonork: Python Thanks Meter: 1,063	first your smart testpoint cable should be good and second read carefully manual 3rd dont mistake Br MAPLE GSM

10-31-2007, 09:43	#6 (permalink)
playboy123 Freak Poster Join Date: Jan 2005 Age: 39 Posts: 142 Member: 109133 Status: Offline Thanks Meter: 12	i cant seem to find right testpoint on v6 and v3xx on diagrams cam someone please help me

10-31-2007, 09:54	#7 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ playboy123, All TP pictures can be found at www.boot-loader.com, section Public Downloads->testpoints->... Best Regards Smart-clip team www.smart-clip.com www.scoutdongle.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

10-31-2007, 13:20	#8 (permalink)
trieubk No Life Poster Join Date: May 2005 Location: Vietnam Age: 50 Posts: 1,485 Member: 149256 Status: Offline Thanks Meter: 285	I've just unlocked one successfully , first i tried with TP cable (from unknown Team)--->no success, then tried with original smart TP cable (from SC Team)--->it worked fine

11-01-2007, 09:12	#9 (permalink)
adebam No Life Poster Join Date: Sep 2005 Location: Nigeria, Oyo state Age: 48 Posts: 643 Member: 180091 Status: Offline Thanks Meter: 62	my testpoint cable is from GP. Is this one okay? pls advice.

11-01-2007, 11:22	#10 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	No, that one is not OK, use the original cables only. Best Regards GSMServer team

11-01-2007, 13:00	#11 (permalink)
chowdary No Life Poster Join Date: Nov 2004 Posts: 1,980 Member: 91102 Status: Offline Thanks Meter: 34	what about smart tp cable from I-PHONE is it any good has anybody tested it it has got primary , secondary testpoint pins ground and power clip colours are yellow (possibly primary) green(possibly secondary) res with crocodile clip (possibly ground) black with black clip(possibly power) these cables are sold in fonefunshop has anybody tried this cable or what does the smart clip team say about this cable br

11-01-2007, 21:10	#13 (permalink)
bobxxx Freak Poster Join Date: Nov 2006 Posts: 181 Member: 396605 Status: Offline Thanks Meter: 8	I bought smart tp in gsmserver and it didn't work with V3re and W510, I haven't tested yet in V3xx.

11-02-2007, 11:09	#14 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	If it didn't work with 2 phones in row, then check if you have performed the procedure correctly! Best Regards GSMServer team