what the problem with this L6? - GSM-Forum

.:bono:. · 11-17-2006, 19:42

hi
i got a dead L6, after i opened it, i saw the shild cuted, but the guy who have did it seams didn't do the tp.

with or without tp, smart moto said:

SmartMoto 1.23
Clip serial: xxxxxxxxxx, version: 2.26, initializing... OK
Searching for phone... found S Flash Neptune LTE, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 2.00
Reading flash id... Intel-28F256L18B
Phone group: A630,E1,E37x,E39x,E55x,L6,U6,V3,V190,V330,V53x,V54 x,V55x,V62x,V635,V80
Hardware IMEI: 359180004935240
Security area saved to "S Flash Neptune LTE 359180004935240.pds"
Preparing... error AE

and when repairing pds:

Reading flash id... Intel-28F256L18B
Phone group: A630,E1,E37x,E39x,E55x,L6,U6,V3,V190,V330,V53x,V54 x,V55x,V62x,V635,V80
Hardware IMEI: 359180004935240
Security area saved to "S Blank Neptune LTE 359180004935240 (2).pds"
Login request... OK
Writing section0 10000/10000... 100% 31.7 Kb/sec sector write error
Extended sector write error code is 92

i saw in the forum that A0 means flash ship damaged, what about the error AE ?

.:bono:. · 11-17-2006, 19:56

after rehot the black ic near tp:

SmartMoto 1.23
Clip serial: xxxxxxxxxx, version: 2.26, initializing... OK
Searching for phone... found S Blank Neptune LTE, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 0.FF
Reading flash id... Intel-28F256L18B
Phone group: A630,E1,E37x,E39x,E55x,L6,U6,V3,V190,V330,V53x,V54 x,V55x,V62x,V635,V80
Hardware IMEI: 359180004935240
Security area saved to "S Blank Neptune LTE 359180004935240 (3).pds"
Preparing... error A9

.:bono:. · 11-17-2006, 20:10

now i could repair pds and unlock but still dead

Searching for phone... found S Blank Neptune LTE, getting test interface... interface not found
Switching to flash mode... OK
Searching for phone... found S Blank Neptune LTE, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 0.FF
Reading flash id... Intel-28F256L18B
Phone group: A630,E1,E37x,E39x,E55x,L6,U6,V3,V190,V330,V53x,V54 x,V55x,V62x,V635,V80
Hardware IMEI: 359180004935240
Security area saved to "S Blank Neptune LTE 359180004935240 (4).pds"
Preparing... error A9
Login request... OK
Writing section0 done
Writing section1 done
Writing section2 done
Writing section3 done
Restarting phone... OK
Searching for phone... found S Blank Neptune LTE
Switching to flash mode... OK
Repair PDS request... OK
Performing PDS repair... OK
Preparing... clip communication failed

Searching for phone... found S Blank Neptune LTE, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 2.00
Reading flash id... Intel-28F256L18B
Phone group: A630,E1,E37x,E39x,E55x,L6,U6,V3,V190,V330,V53x,V54 x,V55x,V62x,V635,V80
Hardware IMEI: 359180004935240
Security area saved to "S Blank Neptune LTE 359180004935240 (5).pds"
Writing section0 done
Turning phone off... OK
Searching for phone... found S Blank Neptune LTE
Switching to flash mode... OK
Unlocking phone... OK

maybe i nead to flash it, plz can some one give me a link for full flash?

thanks

Mr.Tinkertrain · 11-18-2006, 10:43

@ .:bono:.,

Try to make Repair PDS and after that Full Flash the phone.

All files that we have can be found at boot-loader.com, section SmartMoto.

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

.:bono:. · 11-18-2006, 14:41

i have one one flash file, i can't acses support area, but soon i'll buy a credit for.

i repaired pds then flash also with cheked overwrite boot area, result phone still dead, but if i press (* + # )then put battery, phone can inter in flash mode.

SmartMoto 1.23
Clip serial: xxxxxxxxxx, version: 2.26, initializing... OK
Searching for phone... found S Blank Neptune LTE, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 2.00
Reading flash id... Intel-28F256L18B
Phone group: A630,E1,E37x,E39x,E55x,L6,U6,V3,V190,V330,V53x,V54 x,V55x,V62x,V635,V80
Hardware IMEI: 359180004935240
Security area saved to "S Blank Neptune LTE 359180004935240 (9).pds"
Login request... OK
Writing section0 done
Writing section1 done
Writing section2 done
Writing section3 done
Restarting phone... OK
Searching for phone... found S Blank Neptune LTE
Switching to flash mode... OK
Repair PDS request... OK
Performing PDS repair... OK
Writing section0 done
Please write a corresponding Full_flash file to phone to accomplish repair
Writing section1 done
Flash completed!

but if i flash the phone with pst, phone alweys power on in flash mode with (code corruput)

11-17-2006, 19:42	#1 (permalink)
.:bono:. No Life Poster Join Date: Dec 2004 Location: Algeria Posts: 3,142 Member: 96141 Status: Offline Thanks Meter: 200	what the problem with this L6? hi i got a dead L6, after i opened it, i saw the shild cuted, but the guy who have did it seams didn't do the tp. with or without tp, smart moto said: SmartMoto 1.23 Clip serial: xxxxxxxxxx, version: 2.26, initializing... OK Searching for phone... found S Flash Neptune LTE, getting test interface... interface not found Switching to flash mode... OK Reading phone boot version... 2.00 Reading flash id... Intel-28F256L18B Phone group: A630,E1,E37x,E39x,E55x,L6,U6,V3,V190,V330,V53x,V54 x,V55x,V62x,V635,V80 Hardware IMEI: 359180004935240 Security area saved to "S Flash Neptune LTE 359180004935240.pds" Preparing... error AE and when repairing pds: Reading flash id... Intel-28F256L18B Phone group: A630,E1,E37x,E39x,E55x,L6,U6,V3,V190,V330,V53x,V54 x,V55x,V62x,V635,V80 Hardware IMEI: 359180004935240 Security area saved to "S Blank Neptune LTE 359180004935240 (2).pds" Login request... OK Writing section0 10000/10000... 100% 31.7 Kb/sec sector write error Extended sector write error code is 92 i saw in the forum that A0 means flash ship damaged, what about the error AE ?

11-17-2006, 19:56	#2 (permalink)
.:bono:. No Life Poster Join Date: Dec 2004 Location: Algeria Posts: 3,142 Member: 96141 Status: Offline Thanks Meter: 200	after rehot the black ic near tp: SmartMoto 1.23 Clip serial: xxxxxxxxxx, version: 2.26, initializing... OK Searching for phone... found S Blank Neptune LTE, getting test interface... interface not found Switching to flash mode... OK Reading phone boot version... 0.FF Reading flash id... Intel-28F256L18B Phone group: A630,E1,E37x,E39x,E55x,L6,U6,V3,V190,V330,V53x,V54 x,V55x,V62x,V635,V80 Hardware IMEI: 359180004935240 Security area saved to "S Blank Neptune LTE 359180004935240 (3).pds" Preparing... error A9 Last edited by .:bono:.; 11-17-2006 at 20:59.

11-17-2006, 20:10	#3 (permalink)
.:bono:. No Life Poster Join Date: Dec 2004 Location: Algeria Posts: 3,142 Member: 96141 Status: Offline Thanks Meter: 200	now i could repair pds and unlock but still dead Searching for phone... found S Blank Neptune LTE, getting test interface... interface not found Switching to flash mode... OK Searching for phone... found S Blank Neptune LTE, getting test interface... interface not found Switching to flash mode... OK Reading phone boot version... 0.FF Reading flash id... Intel-28F256L18B Phone group: A630,E1,E37x,E39x,E55x,L6,U6,V3,V190,V330,V53x,V54 x,V55x,V62x,V635,V80 Hardware IMEI: 359180004935240 Security area saved to "S Blank Neptune LTE 359180004935240 (4).pds" Preparing... error A9 Login request... OK Writing section0 done Writing section1 done Writing section2 done Writing section3 done Restarting phone... OK Searching for phone... found S Blank Neptune LTE Switching to flash mode... OK Repair PDS request... OK Performing PDS repair... OK Preparing... clip communication failed Searching for phone... found S Blank Neptune LTE, getting test interface... interface not found Switching to flash mode... OK Reading phone boot version... 2.00 Reading flash id... Intel-28F256L18B Phone group: A630,E1,E37x,E39x,E55x,L6,U6,V3,V190,V330,V53x,V54 x,V55x,V62x,V635,V80 Hardware IMEI: 359180004935240 Security area saved to "S Blank Neptune LTE 359180004935240 (5).pds" Writing section0 done Turning phone off... OK Searching for phone... found S Blank Neptune LTE Switching to flash mode... OK Unlocking phone... OK maybe i nead to flash it, plz can some one give me a link for full flash? thanks Last edited by .:bono:.; 11-17-2006 at 21:00.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What is the problem with this team	.::Naseer Al-islam::.	A1-Services.org	4	03-26-2009 04:50
WHAT IS THE PROBLEM WITH THIS?? INFINITY pls help...	xannix_7575	Infinity-Box	8	03-06-2009 01:40
what is the problem with this please help	zerocoolfrost	Universalbox	2	10-01-2008 17:16
what the H*** with this !	amitks_in	Smart-Clip	2	05-15-2007 08:32

11-18-2006, 10:43	#4 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ .:bono:., Try to make Repair PDS and after that Full Flash the phone. All files that we have can be found at boot-loader.com, section SmartMoto. Best Regards Smart-clip team www.smart-clip.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

11-18-2006, 14:41	#5 (permalink)
.:bono:. No Life Poster Join Date: Dec 2004 Location: Algeria Posts: 3,142 Member: 96141 Status: Offline Thanks Meter: 200	i have one one flash file, i can't acses support area, but soon i'll buy a credit for. i repaired pds then flash also with cheked overwrite boot area, result phone still dead, but if i press (* + # )then put battery, phone can inter in flash mode. SmartMoto 1.23 Clip serial: xxxxxxxxxx, version: 2.26, initializing... OK Searching for phone... found S Blank Neptune LTE, getting test interface... interface not found Switching to flash mode... OK Reading phone boot version... 2.00 Reading flash id... Intel-28F256L18B Phone group: A630,E1,E37x,E39x,E55x,L6,U6,V3,V190,V330,V53x,V54 x,V55x,V62x,V635,V80 Hardware IMEI: 359180004935240 Security area saved to "S Blank Neptune LTE 359180004935240 (9).pds" Login request... OK Writing section0 done Writing section1 done Writing section2 done Writing section3 done Restarting phone... OK Searching for phone... found S Blank Neptune LTE Switching to flash mode... OK Repair PDS request... OK Performing PDS repair... OK Writing section0 done Please write a corresponding Full_flash file to phone to accomplish repair Writing section1 done Flash completed! but if i flash the phone with pst, phone alweys power on in flash mode with (code corruput)