WX306 unlock?

[dragosgsm]

Originally Posted by GSM_Support

@ astralis,

WX306 is not currently supported by Smart-Clip.
You can check list of all supported phone models here.
It can be unlocked with the SigmaKey.

Best Regards
GSMServer team

Better say: We do not support SmartClip any more and we would like to buy another tool from us...SigmaKey
...better make a payed addon to SmartClip

[uti79]

Today I have done one piece motorola WX306 with smartmoto 4.30 with phone off connect it to one com emulator ( I used Z3x box comport ) with cable microusb from Lg GS101 ,works like a charm

[maremestera]

LG microUSB UART cable without modification it is ok for unlock wx306?

[stefani]

Hello..wx306 unlock done without problems...
Cable GW300


SmartMoto 4.30
S-Card: Smart-Clip dongle, v 3.11, assigned Smart-Clip: 2Europe, initializing... OK
USB Serial Port (COM29), provider - FTDI, drv. ver. 2.0.0.0 from 5/19/2006
Release the Power ON button
MCU: MT6268, HW rev. B.01, SW rev. B.01
Testing external RAM...64 Mb
Architecture: NAND, Manufacturer: Samsung, Chip model not detected [EC00B1-55]
Flash size - 128 Mb, Page size - 2048, Bad blocks - 0
Firmware size - 37 Mb, Filesystem size - 91 Mb
Firmware - CELLONSZ68_BUNTING3G_09B_PCB01_UMTS_MT6268_S01.BUN TING3G_MAINCODE_16_02
Hardware IMEI: 358954040757201
Volume /dev/ffs1 mounted
Phone is unlocked

[dark2peu]

for me work LG GW300 from microbox .... 100% WORK !!!!

[yuly262]

sigmakey support . use gw 300 cable for unlock