BB9500 code error; please wait.... - GSM-Forum

mohangbvk · 04-13-2009, 13:22

i have blackberry 9500
all cards working but it showing network Active
GPRS not working.

Code reded but while entering codes always say code error; please wait..
. remaining counter 10.entered codes more than ten times till now. but counter is 10 left.

Searching for usb device ...
Reading info ...
IMEI: 359484026xxxxxx
Calculating ...

MEP2 CODE: 8525363769933781

How to enter codes in BlackBerry
1. Insert any sim card
2. Turn off all of the wireless connections
3. Go to Options
4. Select Advanced Options
5. Select SIM Card
6. Hit menu select show keyboard (where needed)
7. Type MEPPD or MEPD (you will not be able to see the typed info)
8. Enter MEP2 or MEPP2
9. Now it will say enter network mep code

Done !
Time needed - 00:00:17

please help me what to do?

**.:hack3r2k:.** · 04-13-2009, 13:53

Quote:

Originally Posted by mohangbvk

i have blackberry 9500
all cards working but it showing network Active
GPRS not working.

Code reded but while entering codes always say code error; please wait..
. remaining counter 10.entered codes more than ten times till now. but counter is 10 left.

Searching for usb device ...
Reading info ...
IMEI: 359484026xxxxxx
Calculating ...

MEP2 CODE: 8525363769933781

How to enter codes in BlackBerry
1. Insert any sim card
2. Turn off all of the wireless connections
3. Go to Options
4. Select Advanced Options
5. Select SIM Card
6. Hit menu select show keyboard (where needed)
7. Type MEPPD or MEPD (you will not be able to see the typed info)
8. Enter MEP2 or MEPP2
9. Now it will say enter network mep code

Done !
Time needed - 00:00:17

please help me what to do?

Put one sim inside , reflash phone, retyr and if same try enter 8 digits from code only.

Br

mohangbvk · 04-13-2009, 14:01

thx Mr. .:hack3r2k:. for fast reply

i reflashed the hand set and also tried first 8 digits. sorry not mentioned in my post. i read your earlier post so i did that

one Q. while flashing sim card shuld be inside ?

**.:hack3r2k:.** · 04-13-2009, 14:39

Quote:

Originally Posted by mohangbvk

thx Mr. .:hack3r2k:. for fast reply

i reflashed the hand set and also tried first 8 digits. sorry not mentioned in my post. i read your earlier post so i did that

one Q. while flashing sim card shuld be inside ?

Only when u enter unlock code.

Br

.:Always here:. · 04-13-2009, 16:11

Brother First Relock And Flash Phone After Flash Again Unlock And Enter Code

mohangbvk · 04-13-2009, 16:18

Quote:

Originally Posted by .:hack3r2k:.

Only when u enter unlock code.

Br

after entering codes it say code error; please wait.

i tried

1 read codes and entered (with sim) same error
2 1st 8 digits entered(with sim) same error
3 re flashed & entered codes (with sim) same error
4 re flashed & entered 1st 8 digits(with sim) same error

handset working with all sim cards
but shows NETWORK ACTIVE
gprs not working.
gprs in small letters

what is the solution
please help me. i have two handsets in with me

**.:hack3r2k:.** · 04-14-2009, 19:10

Quote:

Originally Posted by mohangbvk

after entering codes it say code error; please wait.

i tried

1 read codes and entered (with sim) same error
2 1st 8 digits entered(with sim) same error
3 re flashed & entered codes (with sim) same error
4 re flashed & entered 1st 8 digits(with sim) same error

handset working with all sim cards
but shows NETWORK ACTIVE
gprs not working.
gprs in small letters

what is the solution
please help me. i have two handsets in with me

You must reset policy settings, You do same as for for password remove & disable.

Br

dharmdev · 04-15-2009, 10:34

blackberry 9500 i have same problem

dharmdev · 04-15-2009, 10:46

Searching for usb device ...
Reading info ...
IMEI: 359484023709309
Calculating ...

MEP2 CODE: 2177150474118376

How to enter codes in BlackBerry
1. Insert any sim card
2. Turn off all of the wireless connections
3. Go to Options
4. Select Advanced Options
5. Select SIM Card
6. Hit menu select show keyboard (where needed)
7. Type MEPPD or MEPD (you will not be able to see the typed info)
8. Enter MEP2 or MEPP2
9. Now it will say enter network mep code

Done !
Time needed - 00:00:29

dharmdev · 04-15-2009, 10:51

after entering codes it say code error; please wait.

i tried

1 read codes and entered (with sim) same error
2 1st 8 digits entered(with sim) same error
3 re flashed & entered codes (with sim) same error
4 re flashed & entered 1st 8 digits(with sim) same error

handset working with all sim cards
but shows NETWORK ACTIVE
gprs not working.
gprs in small letters

what is the solution
please help me. i have one handsets in with me

mohangbvk · 04-15-2009, 13:01

Quote:

Originally Posted by .:hack3r2k:.

You must reset policy settings, You do same as for for password remove & disable.

Br

can u explain me how to do reset policy settings

i tried but no success

please tell me what steps to do ?

thx

dharmdev · 04-16-2009, 15:58

????????????????????????????????????????????????? please tell me

::.imeimate.:: · 04-17-2009, 03:04

here you go
http://forum.gsmhosting.com/vbb/show...86&postcount=2

iEraser · 11-05-2009, 22:55

Quote:

Originally Posted by mohangbvk

gprs in small letters

gprs in high letters only if BB registred and working BIS or BES network, small letters - gprs working on your mobile perator, if you write in TCP/IP settings APN settings your mobile operator.

04-13-2009, 13:22	#1 (permalink)
mohangbvk Freak Poster Join Date: Feb 2005 Age: 52 Posts: 125 Member: 114143 Status: Offline Thanks Meter: 55	BB9500 code error; please wait.... i have blackberry 9500 all cards working but it showing network Active GPRS not working. Code reded but while entering codes always say code error; please wait.. . remaining counter 10.entered codes more than ten times till now. but counter is 10 left. Searching for usb device ... Reading info ... IMEI: 359484026xxxxxx Calculating ... MEP2 CODE: 8525363769933781 How to enter codes in BlackBerry 1. Insert any sim card 2. Turn off all of the wireless connections 3. Go to Options 4. Select Advanced Options 5. Select SIM Card 6. Hit menu select show keyboard (where needed) 7. Type MEPPD or MEPD (you will not be able to see the typed info) 8. Enter MEP2 or MEPP2 9. Now it will say enter network mep code Done ! Time needed - 00:00:17 please help me what to do?

04-15-2009, 10:34	#8 (permalink)
dharmdev No Life Poster Join Date: Jan 2004 Posts: 1,078 Member: 51125 Status: Offline Thanks Meter: 1,435	blackberry 9500 i have same problem blackberry 9500 i have same problem

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blackberry 9530 code error please wait [SOLVED]	kabirhossain	FuriousGold	7	11-16-2010 23:51
code error please wait..........	tamil	FuriousGold	0	12-17-2009 22:58
8900 code error please wait	calmant224	FuriousGold	1	06-05-2009 17:14
BB 8100 Code error, please wait	F@RUK S	FuriousGold	11	02-20-2009 10:49

04-13-2009, 14:01	#3 (permalink)
mohangbvk Freak Poster Join Date: Feb 2005 Age: 52 Posts: 125 Member: 114143 Status: Offline Thanks Meter: 55	thx Mr. .:hack3r2k:. for fast reply i reflashed the hand set and also tried first 8 digits. sorry not mentioned in my post. i read your earlier post so i did that one Q. while flashing sim card shuld be inside ?

04-13-2009, 16:11	#5 (permalink)
.:Always here:. Freak Poster Join Date: Mar 2009 Posts: 257 Member: 1000097 Status: Offline Thanks Meter: 245	Brother First Relock And Flash Phone After Flash Again Unlock And Enter Code

04-15-2009, 10:46	#9 (permalink)
dharmdev No Life Poster Join Date: Jan 2004 Posts: 1,078 Member: 51125 Status: Offline Thanks Meter: 1,435	Searching for usb device ... Reading info ... IMEI: 359484023709309 Calculating ... MEP2 CODE: 2177150474118376 How to enter codes in BlackBerry 1. Insert any sim card 2. Turn off all of the wireless connections 3. Go to Options 4. Select Advanced Options 5. Select SIM Card 6. Hit menu select show keyboard (where needed) 7. Type MEPPD or MEPD (you will not be able to see the typed info) 8. Enter MEP2 or MEPP2 9. Now it will say enter network mep code Done ! Time needed - 00:00:29

04-15-2009, 10:51	#10 (permalink)
dharmdev No Life Poster Join Date: Jan 2004 Posts: 1,078 Member: 51125 Status: Offline Thanks Meter: 1,435	after entering codes it say code error; please wait. i tried 1 read codes and entered (with sim) same error 2 1st 8 digits entered(with sim) same error 3 re flashed & entered codes (with sim) same error 4 re flashed & entered 1st 8 digits(with sim) same error handset working with all sim cards but shows NETWORK ACTIVE gprs not working. gprs in small letters what is the solution please help me. i have one handsets in with me

04-16-2009, 15:58	#12 (permalink)
dharmdev No Life Poster Join Date: Jan 2004 Posts: 1,078 Member: 51125 Status: Offline Thanks Meter: 1,435	????????????????????????????????????????????????? please tell me

04-17-2009, 03:04	#13 (permalink)
::.imeimate.:: No Life Poster Join Date: Sep 2005 Location: Melbourne / Australia Age: 47 Posts: 3,426 Member: 177834 Status: Offline Thanks Meter: 1,800	here you go http://forum.gsmhosting.com/vbb/show...86&postcount=2