GSM-Forum - FuriousGold Successfully Unlocked / Repaired / Flashed Phones !!!

- - FuriousGold Successfully Unlocked / Repaired / Flashed Phones !!! (https://forum.gsmhosting.com/vbb/f272/furiousgold-successfully-unlocked-repaired-flashed-phones-661803/)

maxpatri9

07-11-2019 23:17

ALCATEL 5033A FRP DONE

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM4))
Preparing to start flash mode;
Preparing to open COM4
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: 7246ee08332bff99ea883bd2058531ec
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6739 [CA00, 00, 6739, 00]
HW_STORAGE_EMMC: 0x46000115 0x4D32364E 0xDFA40342 0x47B44DD2 [SIZE=0x1D2880000]
IMEI1 [OTP 0000]: 356268-09-006441-4
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: 5033A-2ARGDO1
USRDATA INFO: 0x85000000 SIZE: 0x1494FBE00

Factory Reset Protection successfully removed !

Time needed - 00:00:00

Log file saved to: LOG_11_07_2019_17_40_40.txt

bright hlatini

07-15-2019 23:54

World first mtn smart m560m3 unlock done

Searching phone;
For an successful connection do the following:
1. Connect the phone powered off with the battery inside to the usb cable
Phone detected (@oem89.inf,%usbcomm_dl%;SPRD U2S Diag)
Preparing to sync;
Port opened [COM28];
Entering diagnostic mode;
Done;
Chip type: 0000:0000

Platform Version: MOCORTM_17C_W18.23.4_P15_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W18.23.4_P15
HW Version: sc7731e_modem
01-15-2019 19:33:25
Build number: sp7731ef_19c10_native-user 4.4.4 KTU84P eng.fuqiang.20190310.232211 test-keys
PHONE INFO:
BT ADDR: FF:FF:FF:FF:FF:FF
SW IMEI[0]: 864144-04-098957-7
SW IMEI[1]: 864144-04-148957-7
SW IMEI[2]: 867400-02-031663-8
SW IMEI[3]: 867400-02-031664-6

SIMLOCK FLAG: ON

SIM_LOCK TYPE: 2

IMEI: 864144-04-098957-7 UNLOCK CODE: 16142496

Done;

Phone unlocked; Remove battery and cable;

Log file saved to: LOG_16_07_2019_00_48_30.txt

Time needed - 00:00:06

:eek::eek::eek::eek::eek::eek::eek::eek::eek:

ramoon20

07-17-2019 11:25

Sfr112 unlock done

Hi to all
press power botton tell ligth on then press ok then power off and press ok thats' it:D
Software engine version: 1.0.0.6621
Connect phone powered on !
Start auth !
SW Ver: EFSPI-FR-SFR-P108E10FM(S)V1.0.0B08
Imei: 35************
Done;
Press power on !
Starting communication ...
Platform: E-Gold Voice ...
Preloader sent ....
Starting ...
Authorising ...
Loader sent ....

Flash ID(0): 00EC:0103

Reading ...
Saved: ZTE_353894032735036_EFSPI-FR-SFR-P108E10FM(S)V1.0.0B08_12.11.30_17.07.2019_PARTIAL. bin
Erasing ...
Writing ...
Erasing ...
Writing ...
Unlocked ! Remove battery and put back !
Time needed - 00:01:29

Tom_ptm

07-18-2019 02:59

Y5 2019 AMN-LX2 Flash Demo Reset DONE

1 Attachment(s)

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable with testpoint connected]
Phone detected (MediaTek USB Port_V1632 (COM6))
Preparing to start flash mode;
Preparing to open COM6
Connecting;
Downloading DA;
Initializing;
Rid: ecb3a963757dbcb8a6ff9d343874a76f
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6761 [CA01, 200, 6761, 00]
HW_STORAGE_EMMC: 0x51000115 0x4D333644 0x63B70142 0x19169E9B [SIZE=0x749400000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x110000000 SIZE: 0x637A00000

Loading the file ...
Cfg done ...
Downloading images...
Done;
Downloading bootloader...
Done;
Success;

Time needed - 00:03:33

Log file saved to: LOG_18_07_2019_08_41_25.txt

..::GMSR::..

07-19-2019 15:14

AMN-LX9 HUAWEI Y5 2019_IMEI_Repair Done Special Thanks to Daniel ;)

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable with testpoint connected]
Phone detected (MediaTek USB Port (COM21))
Preparing to start flash mode;
Preparing to open COM21
Connecting;
Downloading DA;
Initializing;
Rid: 7a1ad39cec19ead537544ddd8276b16f
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6761 [CA01, 200, 6761, 00]
HW_STORAGE_EMMC: 0x51000115 0x4D333644 0x4C160142 0x3F164CD0 [SIZE=0x749400000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x110000000 SIZE: 0x637A00000

Searching data;
Checking data;

Contents saved to :
C:\Users\Dream\Desktop\log\HUAWEI Y5 2019_IMEI_5A1F4E99_ABC25725_7a1ad39cec19ead537544d dd8276b16f_19_07_2019_11_18_32.osp
Downloading images...
Done;
Searching phone;
(insert the USB cable in the powered off phone)

Phone detected (PreLoader USB VCOM Port (COM9))
Preparing to start fastboot mode;

Done; Fastboot mode entered;
Connecting;
switching_fastboot_mode: OK;
resistance is futile : OK !?;
data_written : OK;
data_written : OK;
data_written : OK;
data_written : OK;
data_written : OK;
data_written : OK;
data_written : OK;

IMEI repaired; Remove battery and cable;

Time needed - 00:01:11

Log file saved to: LOG_19_07_2019_11_19_42.txt

..::GMSR::..

07-19-2019 15:20

..::GMSR::..

07-20-2019 12:03

HUAWEI HONOR 8A [JAT-L29] FRP Reset Done by FuriouS GOLD

Code:

Using library Brom_DLL_v7.1813.3

Searching phone in normal mode;

[connect the phone powered off to the usb cable with testpoint connected]

Phone detected (MediaTek USB Port (COM21))

Preparing to start flash mode;

Preparing to open COM21

Connecting;

Downloading DA;

Initializing;

Rid: 44d1634942885fd59c9008c2c6eb1f51

Requesting baudrate change;

Done;

USB SPEED: USB_HIGH_SPEED

DEVICE INFO:

BB CHIP: MT6765 [CA00, 00, 6765, 00]

HW_STORAGE_EMMC: 0x51000115 0x4D333644 0xBA030142 0x17167C90  [SIZE=0x749400000]

IMEI1 [OTP 0000]: 000000-00-000000-0

IMEI2 [OTP 0000]: 000000-00-000000-0

PROVIDER: N/A

USRDATA INFO: 0x14E800000 SIZE: 0x5F9200000
 
 

Loading the file ...

Cfg done ...

Downloading bootloader...

Done;

Downloading images...

Done;

Success;
 

Time needed - 00:09:42

Code:

Using library Brom_DLL_v7.1813.3

Searching phone in normal mode;

[connect the phone powered off to the usb cable with testpoint connected]

Phone detected (MediaTek USB Port (COM21))

Preparing to start flash mode;

Preparing to open COM21

Connecting;

Downloading DA;

Initializing;

Rid: 44d1634942885fd59c9008c2c6eb1f51

Requesting baudrate change;

Done;

USB SPEED: USB_HIGH_SPEED

DEVICE INFO:

BB CHIP: MT6765 [CA00, 00, 6765, 00]

HW_STORAGE_EMMC: 0x51000115 0x4D333644 0xBA030142 0x17167C90  [SIZE=0x749400000]

IMEI1 [OTP 0000]: 000000-00-000000-0

IMEI2 [OTP 0000]: 000000-00-000000-0

PROVIDER: N/A

USRDATA INFO: 0xEE000000 SIZE: 0x659A00000
 
 
 

Contents saved to :

C:\Users\Dream\Desktop\log\HUAWEI HONOR 8A_IMEI_CDDB009E_FC8D12FE_44d1634942885fd59c9008c2c6eb1f51_20_07_2019_11_11_36.osp

Downloading images...

Done;

Searching phone;

(insert the USB cable in the powered off phone)
 

Phone detected (PreLoader USB VCOM Port (COM9))

Preparing to start fastboot mode; 
 

Done; Fastboot mode entered;

Connecting;

switching_fastboot_mode: OK;

resistance is futile : OK !?;

data_written : OK;

data_written : OK;

data_written : OK;

data_written : OK;

data_written : OK;

data_written : OK;
 

Factory Reset Protection successfully removed !
 
 

Time needed - 00:01:21
 

Log file saved to: LOG_20_07_2019_11_12_57.txt

https://i.ibb.co/DCxF2VS/honor-8a.png

Southsider2009

07-20-2019 15:14

Orange Rise 53 SIM lock repair and unlock done.

First Unlock attempt after using other boxes.

Searching phone;
For an successful connection do the following:
1. Connect the phone powered off with the battery inside to the usb cable
Phone detected (@oem276.inf,%usbcomm_dl%;SPRD U2S Diag)
Preparing to sync;
Port opened [COM20];
Entering diagnostic mode;
Done;
Chip type: 6B4C:5300

Platform Version: MOCORTM_15C_W17.39.2_P1.03_Debug
Project Version: sc983x_cp1
BASE Version: FM_BASE_15C_W17.39.2_P1.03
HW Version: sc983x_modem
12-22-2017 21:57:31
Build number: sp9832a_2h11_orange-user 7.0 NRD90M eng.jinjiy.20180412.165739 release-keys
PHONE INFO:
BT ADDR: FF:FF:FF:FF:FF:FF
SW IMEI[0]: 867302-03-174587-2
SW IMEI[1]: 867302-03-174587-0
SW IMEI[2]: 867400-02-031663-8
SW IMEI[3]: 867400-02-031664-6

SIMLOCK FLAG: OFF

SIM_LOCK TYPE: 2
ERROR: Simlock not enabled ! Phone is unlocked;

Repair SIM lock done after phone still shows lock but other softwares says done.

Effect here is that it doesnt accept code read by both boxes, counter not responding

Searching phone;
For an successful connection do the following:
1. Connect the phone powered off with the battery inside to the usb cable
Phone detected (@oem276.inf,%usbcomm_dl%;SPRD U2S Diag)
Preparing to sync;
Port opened [COM20];
Entering diagnostic mode;
Done;
Chip type: 6B4C:5300

Platform Version: MOCORTM_15C_W17.39.2_P1.03_Debug
Project Version: sc983x_cp1
BASE Version: FM_BASE_15C_W17.39.2_P1.03
HW Version: sc983x_modem
12-22-2017 21:57:31
Build number: sp9832a_2h11_orange-user 7.0 NRD90M eng.jinjiy.20180412.165739 release-keys
PHONE INFO:
BT ADDR: FF:FF:FF:FF:FF:FF
SW IMEI[0]: 867302-03-174587-2
SW IMEI[1]: 867302-03-174587-0
SW IMEI[2]: 867400-02-031663-8
SW IMEI[3]: 867400-02-031664-6

SIMLOCK FLAG: OFF

Done;

SLOCK repaired; Remove battery and cable;

Now, SIM Unlock is Done

Searching phone;
For an successful connection do the following:
1. Connect the phone powered off with the battery inside to the usb cable
Phone detected (@oem276.inf,%usbcomm_dl%;SPRD U2S Diag)
Preparing to sync;
Port opened [COM20];
Entering diagnostic mode;
Done;
Chip type: 6B4C:5300

Platform Version: MOCORTM_15C_W17.39.2_P1.03_Debug
Project Version: sc983x_cp1
BASE Version: FM_BASE_15C_W17.39.2_P1.03
HW Version: sc983x_modem
12-22-2017 21:57:31
Build number: sp9832a_2h11_orange-user 7.0 NRD90M eng.jinjiy.20180412.165739 release-keys
PHONE INFO:
BT ADDR: FF:FF:FF:FF:FF:FF
SW IMEI[0]: 867302-03-174587-2
SW IMEI[1]: 867302-03-174587-0
SW IMEI[2]: 867400-02-031663-8
SW IMEI[3]: 867400-02-031664-6

SIMLOCK FLAG: ON

SIM_LOCK TYPE: 2

IMEI: 867302-03-174587-2 UNLOCK CODE: 60299204

Code reading finished; Remove battery and cable;

Thanks FuriousGOLD for steadily focusing on Network Unlocks

zineelhada

07-20-2019 18:31

huawei p 20 lite ANE-LX2 frp done

huawei p 20 lite ANE-LX2 android frp done with test point
https://www9.0zz0.com/2019/07/20/20/552535519.jpg
https://www5.0zz0.com/2019/07/20/20/585762076.jpg

radu_adriansv

07-22-2019 09:16

allview p8 pro frp remove

1 Attachment(s)

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek PreLoader USB VCOM (Android) (COM22))
Preparing to start flash mode;
Preparing to open COM22
Connecting;
Downloading DA;
Initializing;
Rid: 917e16f4ec40f14a2f0c49240b428ffc
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6737T [CA00, 00, 321, FF]
HW_STORAGE_EMMC: 0x422201F4 0x6E697769 0x00001120 0xDD654105 [SIZE=0x39AC00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x124000000 SIZE: 0x274F80000

Factory Reset Protection successfully removed !

Time needed - 00:00:00

Log file saved to: LOG_22_07_2019_11_02_36.txt

russianz64

07-24-2019 20:27

Alcatel REVVL 2 Successfully unlock

OTSmart_v1.0.0.3475

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM24))
Preparing to start flash mode;
Preparing to open COM24
Requesting authorization;
Connecting;
Downloading DA;:
Initializing;
Rid: 437b5c98a54e410ed76820943c04632d
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6739 [CB00, 02, 6739, 00]
HW_STORAGE_EMMC: 0x51000115 0x4D333644 0x0B700142 0x757551AA [SIZE=0x749400000]
IMEI1 [OTP 0001]: 015246-00-000000-0
IMEI2 [OTP 0001]: 000000-00-000000-0
PROVIDER: 5052W-2ATBUSE
USRDATA INFO: 0x133800000 SIZE: 0x6108FBE00

Searching data;
Checking server support license;
Bruteforcing ... relax ;-)
Buteforce took 00:00:00
Checking data integrity;
Data integrity: OK;
SIM_LOCK: PARTIAL_UNLOCK
Rebuilding security;

Phone unlocked; Remove battery and cable;

Time needed - 00:00:03

maxpatri9

07-24-2019 23:15

Huawei rne-l03 frp gone

FROM DOMINICAN REPUBLIC WITH LOVE

Fly Captain Huawei Resurrector 0.0.0.34
user:57A96656

Device detected:
COM113: HUAWEI USB COM 1.0 (COM113)
BOOTLOADER File to update: Kirin659_T0_A8.0_V1
24/07/2019 06:09:35 p.m. Starting to write device...

Process identifier:4554870

Writing bootloader...
Writing Kirin659_T0_A8.0_V1_3.dtwork...
Writing Kirin659_T0_A8.0_V1_4.dtwork...

Waiting for fastboot device...
Device found: V3X5T18615000221

Looking for a device in fastboot mode
Device found: V3X5T18615000221

Getting IMEI...
Getting build number...
Getting model ...
Getting battery state...
Getting backdoor info...
Getting lock state info...
Getting lock boot info...

SN:V3X5T18615000221
IMEI:86622503744

IMEI1:000000000000000

MEID:00000000000000
Build number: :RNE-L03 8.0.0.353(C25)
Model: RNE-L03
Battery state: 0
OEM lock state info:
FB LockState: UNLOCKED
USER LockState: LOCKED
OEM get bootinfo:
unlocked

Unlocking FRP...
Writing FRP partition
FRP partition UPDATE :FAIL partition error
Writing FRP partition
FRP partition UPDATE ...OK
Software written
24/07/2019 06:10:15 p.m. Writing device finished OK

Mr_F10ch3

07-25-2019 20:14

Alcatel 5008R from Criket..

Code:

Using library Brom_DLL_v7.1813.3

Searching phone in normal mode;

[connect the phone powered off to the usb cable]

Phone detected (MediaTek USB Port (COM95))

Preparing to start flash mode;

Preparing to open COM95

Requesting authorization;

Connecting;

Downloading DA;

Initializing;

Rid: 170396ff4ef064915bb6c8a708d4c944

Requesting baudrate change;

Done;

USB SPEED: USB_HIGH_SPEED

DEVICE INFO:

BB CHIP: MT6739 [CB00, 02, 6739, 00]

HW_STORAGE_EMMC: 0x51000115 0x4D333644 0xE3420142 0xEB1666D3  [SIZE=0x749400000]

IMEI1 [OTP 0001]: 015320-00-xxxxx-9

IMEI2 [OTP 0001]: 000000-00-000000-0

PROVIDER: 5008R-2ARKUS7

USRDATA INFO: 0x165000000 SIZE: 0x5DF0FBE00
 
 
 

Searching data;

Checking server support license;

Bruteforcing ... relax ;-)

Buteforce took 00:00:00

Checking data integrity;

Data integrity: OK;

SIM_LOCK: PARTIAL_UNLOCK

Rebuilding security;
 
 Phone unlocked; Remove battery and cable;
 

Time needed - 00:00:04
 

Log file saved to: LOG_25_07_2019_15_00_25.txt

NOTE: For the criket version you need read the SERIAL number with any other tool that let you read it, personally i read it with xtc2clip

https://imgur.com/f0lJHjI

usman0000

07-27-2019 13:47

Hurrican Link counter block unlock world first

1 Attachment(s)

:p:p:p:p:p:p
Searching phone;
For an successful connection do the following:
1. Connect the phone powered off with the battery inside to the usb cable
Phone detected (@oem17.inf,%usbcomm_dl%;SPRD U2S Diag)
Preparing to sync;
Port opened [COM50];
Entering diagnostic mode;
Done;
Chip type: 0000:0000

Platform Version: MOCORTM_17C_W18.23.4_P9_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W18.23.4_P9
HW Version: sc7731e_modem
10-13-2018 10:47:12
Build number: sp7731e_1h20_celc-user 8.1.0 OPM2.171019.012 43411 release-keys
PHONE INFO:
BT ADDR: FF:FF:FF:FF:FF:FF
SW IMEI[0]: 352478-10-004592-3
SW IMEI[1]: 352478-10-004593-1
SW IMEI[2]: 867400-02-031663-8
SW IMEI[3]: 867400-02-031664-6

SIMLOCK FLAG: ON

SIM_LOCK TYPE: 3

IMEI: 352478-10-004592-3 UNLOCK CODE: 86510913

Done;

Phone unlocked; Remove battery and cable;

Log file saved to: LOG_27_07_2019_14_38_23.txt

Time needed - 00:00:08

alminkad

07-29-2019 01:55

Huawei p 20 lite frp done

Fly Captain Huawei Resurrector 0.0.0.34
user:8CED21CA

Device detected:
COM202: HUAWEI USB COM 1.0 (COM202)
BOOTLOADER File to update: Kirin659_T0_A8.0_V1
29.7.2019. 2:47:25 Starting to write device...

Process identifier:4563775

Writing bootloader...
Writing Kirin659_T0_A8.0_V1_3.dtwork...
Writing Kirin659_T0_A8.0_V1_4.dtwork...

Waiting for fastboot device...
Device found: 9WV7N19426003267

Looking for a device in fastboot mode
Device found: 9WV7N19426003267

Getting IMEI...
Getting build number...
Getting model ...
Getting battery state...
Getting backdoor info...
Getting lock state info...
Getting lock boot info...

SN:9WV7N19426003267
IMEI:8687570xxxxxxxx

IMEI1:8687570xxxxxxxx

MEID:00000000000000
Build number: :ANE-LX1 9.1.0.147(C432E5R1P7)
Model: ANE-LX1
Battery state: 0
OEM lock state info:
FB LockState: UNLOCKED
USER LockState: LOCKED
OEM get bootinfo:
unlocked

Unlocking FRP...
Writing FRP partition
FRP partition UPDATE :FAIL partition error
Writing FRP partition
FRP partition UPDATE ...OK
Software written
29.7.2019. 2:48:04 Writing device finished O

All times are GMT +1. The time now is 13:32.

Page 1015 of 1062

1015