|
VDF 710 Unlock Done. MODEL : QCOM SERIES 54 COMPILED DATE : Sep 25 2017 00:10:00 RELEASE DATE : May 7 2017 21:00:00 FIRMWARE INFO : MPSS.TA.2.3.c1-00307-8953_GEN_PACK-1.95386.1.98068.3 IMEI : 35812408170944-2 BLUETOOTH ADDR : 00 00 00 00 00 00 FIRMWARE: UK_S_VDF_P840V70V1.0.1B22 close_event_report: OK; close_log_report: OK; close_message_report: OK; closing_com_port: OK; Starting the backup process; connect_server: OK; backup in progress: OK; Backup saved to: E:\BOX\furious gold\PACK5\QCOM_SMART_TOOL_v1.0.0.10756\3581240817 0944_30_07_2019_16_42_04.bkp switching_download_mode: OK; closing_com_port: OK; Preparing to open COM121 Connecting; Loading; Init; Port opened; Hello Received; BOOT Loaded; Getting config; Getting mem info; Found an eMMC memory 22E9 Looking for the interface; Port found [ZTE Handset Diagnostic Interface (COM92)] connect_server: OK; restore in progress: OK; SIM_LOCK REMOVED ! |
Huawei fla-lx3 frp done Fly Captain Huawei Resurrector 0.0.0.34 user:57A96656 Device detected: COM113: HUAWEI USB COM 1.0 (COM113) BOOTLOADER File to update: Kirin659_T0_A8.0_V1 01/08/2019 11:53:57 a.m. Starting to write device... Process identifier:4571912 Writing bootloader... Writing Kirin659_T0_A8.0_V1_3.dtwork... Writing Kirin659_T0_A8.0_V1_4.dtwork... Waiting for fastboot device... Device found: 4UFNW18809000118 Looking for a device in fastboot mode Device found: 4UFNW18809000118 Getting IMEI... Getting build number... Getting model ... Getting battery state... Getting backdoor info... Getting lock state info... Getting lock boot info... SN:4UFNW18809000118 IMEI:8674210328 IMEI1:000000000000000 MEID:00000000000000 Build number: :FLA-LX3 9.1.0.121(C25E5R1P2) Model: FLA-LX3 Battery state: 0 OEM lock state info: FB LockState: UNLOCKED USER LockState: LOCKED OEM get bootinfo: unlocked Unlocking FRP... Writing FRP partition FRP partition UPDATE :FAIL partition error Writing FRP partition FRP partition UPDATE ...OK Software written 01/08/2019 11:54:37 a.m. Writing device finished OK |
huawei p20 eml-l00 huawei id remover Fly Captain Huawei Resurrector 0.0.0.34 user:9FAAE2 Device detected: COM34: HUAWEI USB COM 1.0 (COM34) BOOTLOADER File to update: Kirin970_T2_A8.0_V3 OEM File to update: EML-L29 2019-08-01 04:25:47 p.m. Starting to write device... Process identifier:4572375 Writing bootloader... Writing Kirin970_T2_A8.0_V3_3.dtwork... Writing Kirin970_T2_A8.0_V3_4.dtwork... Writing Kirin970_T2_A8.0_V3_5.dtwork... Waiting for fastboot device... Device found: CLB0218721004238 Looking for a device in fastboot mode Device found: CLB0218721004238 Getting IMEI... Getting build number... Getting model ... Getting battery state... Getting backdoor info... Getting lock state info... Getting lock boot info... SN:CLB0218721004238 IMEI:86159404563 IMEI1:86159404572 MEID:A00000936E Build number: :EML-AL00 9.0.0.187(C00E82R1P21) Model: EML-AL00 Battery state: 0 OEM lock state info: FB LockState: UNLOCKED USER LockState: LOCKED OEM get bootinfo: unlocked Unlocking FRP... Writing FRP partition FRP partition UPDATE :FAIL partition error Writing FRP partition FRP partition UPDATE ...OK Writing OEMINFO partition Waiting for answer... OEMINFO partition UPDATE FAIL Fatal error: Cannot access to device Update fastboot mode failed 2019-08-01 04:27:32 p.m. Writing device finished - INCOMPLETE |
MRD-LX1 HUAWEI Y6 2019_IMEI_Repair Done by ''FG'' Special Thanks to Daniel ;) https://i.ibb.co/1KpBGsB/Screenshot-...d-settings.jpg Flash Log:- Code: Using library Brom_DLL_v7.1813.3Repair Log:- Code: Using library Brom_DLL_v7.1813.3 |
MOBICEL C1 PASSWORD UNLOCK DONE Searching phone; For an successful connection do the following: 1. Connect the phone powered off with the battery inside to the usb cable Phone detected (@oem89.inf,%usbcomm_dl%;SPRD U2S Diag) Preparing to sync; Port opened [COM28]; Entering diagnostic mode; Done; Chip type: 0000:0000 Mobicel_C1_V03_20170527 Project Version: SC6531EFM_BAR BASE Version: BASE_SVN HW Version: SC6531EFM_BAR 11-20-2017 16:57:02 PHONE INFO: BT ADDR: FF:FF:FF:FF:FF:FF SW IMEI[0]: 3597XXXXXXXXXXXX SW IMEI[1]: 3527XXXXXXXXXXXX SW IMEI[2]: 3585XXXXXXXXXXXX SW IMEI[3]: 910575-60-140046-8 SIMLOCK FLAG: ON Starting factory reset; Modem imei: ERROR Working; Done ! Log file saved to: LOG_2_08_2019_14_54_23.txt Time needed - 00:00:19 |
Docomo D-Tab FRP unlock don 1click + 1 sec 2019-08-04 17:46:44.386 Start read phone info! 2019-08-04 17:46:45.527 Detect phone done! Model: d-02H Firmware ver.: V100R001C00B000 SN: XWB6R16829002114 locked Battery state: 3815mv 2019-08-04 17:46:51.810 Erase FRP start 2019-08-04 17:46:57.219 Reading phone info... 2019-08-04 17:46:57.860 Read phone info success! Model: d-02H Firmware ver.: V100R001C00B000 SN: XWB6R16829002114 2019-08-04 17:46:57.891 Reading Certify data... 2019-08-04 17:46:58.250 Reading Certify data success! 2019-08-04 17:46:58.250 Signing Certify data... 2019-08-04 17:47:04.473 Erase FRP done! thxxxxxxxxxxxxx Furious Team |
P20 pro huawei id remove done |
Vfd510 done!! Software engine version: 1.0.0.10761 Searching phone ... MODEL : QCOM SERIES 51 COMPILED DATE : Nov 12 2018 01:56:00 RELEASE DATE : May 10 2017 19:00:00 FIRMWARE INFO : MPSS.JO.3.0-00291-8909_GEN_PACK-1.97872.1.98558.1 IMEI : 35224909508909-7 BLUETOOTH ADDR : 00 00 00 00 00 00 FIRMWARE: ZA_MR4_VDF_P809V51V1.0.0B01 close_event_report: OK; close_log_report: OK; close_message_report: OK; closing_com_port: OK; Starting the backup process; connect_server: OK; backup in progress: OK; Backup saved to: C:\QUALCOM SMART TOOL\352249095****_6_08_2019_13_21_18.bkp switching_download_mode: OK; closing_com_port: OK; Preparing to open COM467 Connecting; Loading; Init; Port opened; Hello Received; BOOT Loaded; Getting config; Getting mem info; Found an eMMC memory 22CD Looking for the interface; Port found [ZTE Handset Diagnostic Interface (COM250)] connect_server: OK; restore in progress: OK; SIM_LOCK REMOVED ! |
MRD-LX1F Huawei Y6 2019 frp Remove Done Using library Brom_DLL_v7.1813.3 Searching phone in normal mode; [connect the phone powered off to the usb cable with testpoint connected] Phone detected (MediaTek USB Port_V1632 (COM67)) Preparing to start flash mode; Preparing to open COM67 Connecting; Downloading DA; Initializing; Rid: b372ffb30bf3cba8720a1af915520479 Requesting baudrate change; Done; USB SPEED: USB_HIGH_SPEED DEVICE INFO: BB CHIP: MT6761 [CA01, 200, 6761, 00] HW_STORAGE_EMMC: 0x51000115 0x4D333644 0x2F200142 0x3716A0D2 [SIZE=0x749400000] IMEI1 [OTP 0000]: 000000-00-000000-0 IMEI2 [OTP 0000]: 000000-00-000000-0 PROVIDER: N/A USRDATA INFO: 0x14E800000 SIZE: 0x5F9200000 Contents saved to : K:\Download\HUAWEI MRD-LX1_IMEI_E2962A69_14AFC19F_b372ffb30bf3cba8720a1af 915520479_7_08_2019_23_21_26.osp Downloading images... Done; Searching phone; (insert the USB cable in the powered off phone) Phone detected (MediaTek PreLoader USB VCOM_V1632 (Android) (COM492)) Preparing to start fastboot mode; Done; Fastboot mode entered; Connecting; switching_fastboot_mode: OK; resistance is futile : OK !?; data_written : OK; data_written : OK; data_written : OK; data_written : OK; data_written : OK; data_written : OK; Factory Reset Protection successfully removed ! Time needed - 00:01:01 Log file saved to: LOG_7_08_2019_23_22_28.txt |
Alcatel 6062W unlock done within seconds Using library Brom_DLL_v7.1813.3 Searching phone in normal mode; [connect the phone powered off to the usb cable] Phone detected (MediaTek USB Port (COM45)) Preparing to start flash mode; Preparing to open COM45 Requesting authorization; Connecting; Downloading DA; Initializing; Rid: ea20358bbae858474d4dc242b57cf796 Requesting baudrate change; Done; USB SPEED: USB_HIGH_SPEED DEVICE INFO: BB CHIP: MT6763 [CA01, 01, 6763, 00] HW_STORAGE_EMMC: 0x51000115 0x4D333158 0x0DE20742 0x8355D6FC [SIZE=0x748800000] IMEI1 [OTP 0001]: 015126-00-10 IMEI2 [OTP 0001]: 000000-00-000000-0 PROVIDER: 6062W-2BTBUS7 USRDATA INFO: 0x13B800000 SIZE: 0x6088FBE00 Searching data; Checking server support license; Bruteforcing ... relax ;-) Buteforce took 00:00:00 Checking data integrity; Data integrity: OK; SIM_LOCK: ENABLED Rebuilding security; Phone unlocked; Remove battery and cable; Time needed - 00:00:06 Log file saved to: LOG_7_08_2019_18_41_03.txt |
huawei y6 2019..frp !!! Using library Brom_DLL_v7.1813.3 Searching phone in normal mode; [connect the phone powered off to the usb cable with testpoint connected] Phone detected (MediaTek USB Port (COM178)) Preparing to start flash mode; Preparing to open COM178 Connecting; Downloading DA; Initializing; Rid: 3701c869eefa5b0354586816f9d379c9 Requesting baudrate change; Done; USB SPEED: USB_HIGH_SPEED DEVICE INFO: BB CHIP: MT6761 [CA01, 200, 6761, 00] HW_STORAGE_EMMC: 0x51000115 0x4D333644 0xC8F50142 0x8D36B1D2 [SIZE=0x749400000] IMEI1 [OTP 0000]: 000000-00-000000-0 IMEI2 [OTP 0000]: 000000-00-000000-0 PROVIDER: N/A USRDATA INFO: 0xEE000000 SIZE: 0x659A00000 Time needed - 00:01:02 Log file saved to: LOG_8_08_2019_12_35_33.txt |
Mdr-lx1 frp unlock done Using library Brom_DLL_v7.1813.3 Searching phone in normal mode; [connect the phone powered off to the usb cable with testpoint connected] Phone detected (MTK USB Port (COM27)) Preparing to start flash mode; Preparing to open COM27 Connecting; Downloading DA; Initializing; Rid: 228f698292b90b62d8339459608xxxx Requesting baudrate change; Done; USB SPEED: USB_HIGH_SPEED DEVICE INFO: BB CHIP: MT6761 [CA01, 200, 6761, 00] HW_STORAGE_EMMC: 0x51000115 0x4D333644 0xA6650142 0x29162BD8 [SIZE=0x749400000] IMEI1 [OTP 0000]: 000000-00-000000-0 IMEI2 [OTP 0000]: 000000-00-000000-0 PROVIDER: N/A USRDATA INFO: 0x110000000 SIZE: 0x637A00000 Contents saved to : E:\Setup\Furious\Pack 6\OTSmart_v1.0.0.3485_WhosYourDaddy_Edition\HUAWEI MRD-LX1_IMEI_DCC0AC60_2FD8BA75_228f698292b90b62d833945 96080xxx_8_08_2019_15_00_06.osp Downloading images... Done; Searching phone; (insert the USB cable in the powered off phone) Phone detected (MediaTek PreLoader USB VCOM (Android) (COM3)) Preparing to start fastboot mode; Done; Fastboot mode entered; Connecting; switching_fastboot_mode: OK; resistance is futile : OK !?; data_written : OK; data_written : OK; data_written : OK; data_written : OK; data_written : OK; data_written : OK; Factory Reset Protection successfully removed ! Time needed - 00:01:12 Log file saved to: LOG_8_08_2019_15_01_19.txt |
6062w unlock donex2!!!!by furious the king Using library Brom_DLL_v7.1813.3 Searching phone in normal mode; [connect the phone powered off to the usb cable] Phone detected (MediaTek USB Port (COM81)) Preparing to start flash mode; Preparing to open COM81 Requesting authorization; Connecting; Downloading DA; Initializing; Rid: 36bba86f5d4253fbe277a8ef41a87b84 Requesting baudrate change; Done; USB SPEED: USB_HIGH_SPEED DEVICE INFO: BB CHIP: MT6763 [CA01, 01, 6763, 00] HW_STORAGE_EMMC: 0x51000115 0x4D333158 0xB12C0742 0x0DC51FD0 [SIZE=0x748800000] IMEI1 [OTP 0001]: 015126-00-522962-6 IMEI2 [OTP 0001]: 000000-00-000000-0 PROVIDER: 6062W-2BTBUS7 USRDATA INFO: 0x13B800000 SIZE: 0x6088FBE00 Searching data; Checking server support license; Bruteforcing ... relax ;-) Buteforce took 00:00:00 Checking data integrity; Data integrity: OK; SIM_LOCK: ENABLED Rebuilding security; Phone unlocked; Remove battery and cable; Time needed - 00:00:03 |
5052w unlock done!!!!!furious the first and reigning legend Using library Brom_DLL_v7.1813.3 Searching phone in normal mode; [connect the phone powered off to the usb cable] Phone detected (MediaTek USB Port (COM81)) Preparing to start flash mode; Preparing to open COM81 Requesting authorization; Connecting; Downloading DA; Initializing; Rid: 6761e7dac2581d30a3e2c494dffd69db Requesting baudrate change; Done; USB SPEED: USB_HIGH_SPEED DEVICE INFO: BB CHIP: MT6739 [CB00, 02, 6739, 00] HW_STORAGE_EMMC: 0x51000115 0x4D333158 0x2EE00742 0xA1657BDE [SIZE=0x748800000] IMEI1 [OTP 0001]: 015246-00-206108-5 IMEI2 [OTP 0001]: 000000-00-000000-0 PROVIDER: 5052W-2ATBUSE USRDATA INFO: 0x133800000 SIZE: 0x6108FBE00 Searching data; Checking server support license; Bruteforcing ... relax ;-) Buteforce took 00:00:00 Checking data integrity; Data integrity: OK; SIM_LOCK: PARTIAL_UNLOCK Rebuilding security; Phone unlocked; Remove battery and cable; Time needed - 00:00:04 |
huawei mha-al00 remover huawei id ok huawei mha-al00 huawei id remover Fly Captain Huawei Resurrector 0.0.0.34 user:9FAA Device detected: COM34: HUAWEI USB COM 1.0 (COM34) BOOTLOADER File to update: Kirin960_T2_A7.0_V3 OEM File to update: MHA-L09 2019-08-08 03:22:16 p.m. Starting to write device... Process identifier:4591396 Writing bootloader... Writing Kirin960_T2_A7.0_V3_3.dtwork... Writing Kirin960_T2_A7.0_V3_4.dtwork... Writing Kirin960_T2_A7.0_V3_5.dtwork... Waiting for fastboot device... Device found: 3HX7N17118014372 Looking for a device in fastboot mode Device found: 3HX7N17118014372 Getting IMEI... Getting build number... Getting model ... Getting battery state... Getting backdoor info... Getting lock state info... Getting lock boot info... SN:3HX7N17118014372 IMEI:864368037588 IMEI1:86436803804 Build number: :MHA-AL00 9.0.1.179(C00E64R1P14) Model: MHA-AL00 Battery state: 0 OEM lock state info: FB LockState: UNLOCKED USER LockState: LOCKED OEM get bootinfo: unlocked Unlocking FRP... Writing FRP partition FRP partition UPDATE :FAIL partition error Writing FRP partition FRP partition UPDATE ...OK Writing OEMINFO partition OEMINFO partition UPDATE ...OK Software written 2019-08-08 03:23:05 p.m. Writing device finished OK |
| All times are GMT +1. The time now is 10:59. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -