Huawei t156 new security dead after unlock - Page 3 - GSM-Forum

hasnain · 11-14-2009, 15:08

Quote:

Originally Posted by ..::Noman::..

Connect phone powered on !
Start auth !
SW Ver: P1.2PU01V01.01
Imei: 35308
Getting config data;
Done;
Press power on !
Starting communication ...
Platform: E-Gold Voice ...
Preloader sent ....
Starting ...
Authorising ...
Loader sent ....

Flash ID(0): 0001:22C4

Reading ...
Saved: HUAWEI_15.43.53_14.11.2009_PARTIAL.bin
Unlocked ! Remove battery and put back !
Time needed - 00:01:11

log is OK bro no problem in log
in log it show set is successfully unlocked thats why no need to post log
thanx for reply

the red marked things we can only see through logs

u got dead T156 with Flash ID(0): 0001:22C4

i unlock other than this flash id perfect

also few other persons
u can see logs

Connect phone powered on !
Start auth !
SW Ver: P1.2PU03V01.01
Imei: 353081038687805
Getting config data;
Done;
Press power on !
Starting communication ...
Platform: E-Gold Voice ...
Preloader sent ....
Starting ...
Authorising ...
Loader sent ....

Flash ID(0): 00BF:234B

Reading ...
Saved: HUAWEI_12.34.50_13.11.2009_PARTIAL.bin
Unlocked ! Remove battery and put back !
Time needed - 00:01:14

---------------------------------

Connect phone powered on !
Start auth !
SW Ver: P1.2PU03V01.01
Imei: 353081038696830
Getting config data;
Done;
Press power on !
Starting communication ...
Platform: E-Gold Voice ...
Preloader sent ....
Starting ...
Authorising ...
Loader sent ....

Flash ID(0): 00BF:234B

Reading ...
Saved: HUAWEI_12.41.40_13.11.2009_PARTIAL.bin
Unlocked ! Remove battery and put back !
Time needed - 00:01:20

----------------------------------------

Connect phone powered on !
Start auth !
SW Ver: P1.2PU03V01.01
Imei: 353081038693944
Getting config data;
Done;
Press power on !
Starting communication ...
Platform: E-Gold Voice ...
Preloader sent ....
Starting ...
Authorising ...
Loader sent ....

Flash ID(0): 00BF:234B

Reading ...
Saved: HUAWEI_12.43.55_13.11.2009_PARTIAL.bin
Unlocked ! Remove battery and put back !
Time needed - 00:01:08

-------------------------------------------

Connect phone powered on !
Start auth !
SW Ver: P1.2PU03V01.01
Imei: 353081038696673
Getting config data;
Done;
Press power on !
Starting communication ...
Platform: E-Gold Voice ...
Preloader sent ....
Starting ...
Authorising ...
Loader sent ....

Flash ID(0): 00BF:234B

Reading ...
Saved: HUAWEI_12.46.25_13.11.2009_PARTIAL.bin
Unlocked ! Remove battery and put back !
Time needed - 00:01:14

-----------------------------------------------

Connect phone powered on !
Start auth !
SW Ver: P1.2PU03V01.01
Imei: 353081038696624
Getting config data;
Done;
Press power on !
Starting communication ...
Platform: E-Gold Voice ...
Preloader sent ....
Starting ...
Authorising ...
Loader sent ....

Flash ID(0): 00BF:234B

Reading ...
Saved: HUAWEI_12.49.03_13.11.2009_PARTIAL.bin
Unlocked ! Remove battery and put back !
Time needed - 00:01:16

----------------------------------------------

Connect phone powered on !
Start auth !
SW Ver: P1.2PU03V01.01
Imei: 353081038696681
Getting config data;
Done;
Press power on !
Starting communication ...
Platform: E-Gold Voice ...
Preloader sent ....
Starting ...
Authorising ...
Loader sent ....

Flash ID(0): 00BF:234B

Reading ...
Saved: HUAWEI_12.51.46_13.11.2009_PARTIAL.bin
Unlocked ! Remove battery and put back !
Time needed - 00:01:15

---------------------------------------------

Connect phone powered on !
Start auth !
SW Ver: P1.2PU03V01.01
Imei: 353081038696434
Getting config data;
Done;
Press power on !
Starting communication ...
Platform: E-Gold Voice ...
Preloader sent ....
Starting ...
Authorising ...
Loader sent ....

Flash ID(0): 00BF:234B

Reading ...
Saved: HUAWEI_12.54.13_13.11.2009_PARTIAL.bin
Unlocked ! Remove battery and put back !
Time needed - 00:01:13

thanx

**AsiaGSM™** · 11-14-2009, 15:17

Quote:

Originally Posted by hasnain

the red marked things we can only see through logs

also upload .bin file

thanx

here is my bin file
HUAWEI_16.51.20_14.11.2009_PARTIAL.bin

msashami · 11-14-2009, 15:29

I have also unlocked ufone new security. after unlock dead.

i think that bin file can repair it but how to use that???

hasnain · 11-14-2009, 15:33

Quote:

Originally Posted by msashami

I have also unlocked ufone new security. after unlock dead.

i think that bin file can repair it but how to use that???

plz upload logs here and backup file
and make it easy for hack3r2k

msashami · 11-14-2009, 15:41

it is backup file. no log sorry

WBR

Miftahudin · 11-14-2009, 16:03

More then 50 pcs successfully unlocked without any problem …………….

Br.

hasnain · 11-14-2009, 16:05

just unlocked ufone with this version
also same flash ID

after unlock when i reinserted battery
can't power on the set
but i hold power button for a long time
still can't
then i removed battery again and insert it back
and its ok than
power on and unlocked

logs here

Connect phone powered on !
Start auth !
SW Ver: P1.2PU01V01.01
Imei: 353081039538197
Getting config data;
Done;
Press power on !
Starting communication ...
Platform: E-Gold Voice ...
Preloader sent ....
Starting ...
Authorising ...
Loader sent ....
Flash ID(0): 0001:22C4

Reading ...
Saved: HUAWEI_20.00.21_14.11.2009_PARTIAL.bin
Unlocked ! Remove battery and put back !
Time needed - 00:01:15

.::M Irfan::. · 11-14-2009, 16:12

Quote:

Originally Posted by hasnain

always check battery before unlock

is it more than 50% ???

if not than u need a charger first to charge the mobile

u r wrong dear hasnain i have unlock 5 piece with low battery and i have no problem

.::M Irfan::. · 11-14-2009, 16:18

Quote:

Originally Posted by ..::Noman::..

i am also facing this problem i just unlock a t156 new sec and after unlock its not power on
what to do now
FG team where are you please reply the thread

@noman:

i have unlock 150 sets yesterday with FG without any problem...

also i have 34 more set now doing it..

how u say ur set is dead after unlock...

also send me that dead set i will send it to hacker personaly...

regards

m irfan khan

hasnain · 11-14-2009, 16:33

Quote:

Originally Posted by sadam.khan

@noman:

i have unlock 150 sets yesterday with FG without any problem...

also i have 34 more set now doing it..

how u say ur set is dead after unlock...

also send me that dead set i will send it to hacker personaly...

regards

m irfan khan

hasnain · 11-14-2009, 16:42

Quote:

Originally Posted by super decent

Hi
i unlock huawei t156 unlock done using latest exe but its not powering on after unlock process.plz guide me what to do now.thanx

Quote:

Originally Posted by Mohsin Ali S

i am having this problem also new security dead after unlock

Quote:

Originally Posted by ..::Noman::..

i am also facing this problem i just unlock a t156 new sec and after unlock its not power on
what to do now
FG team where are you please reply the thread

Quote:

Originally Posted by Amir-SkillZ

Well am here with You Guys ..did Unlocked many This one Dies

Dont know whats matter

Quote:

Originally Posted by jalil88

don't have logs but have backup file whih softwar created during this process

http://rapidshare.com/files/30691978...RTIAL.rar.html

Quote:

Originally Posted by msashami

I have also unlocked ufone new security. after unlock dead.

i think that bin file can repair it but how to use that???

they all get dead after unlock

can u all send ur mobile to this guy

because he can send to hacker for u

.::M Irfan::. · 11-14-2009, 16:51

Quote:

Originally Posted by hasnain

they all get dead after unlock

can u all send ur mobile to this guy

because he can send to hacker for u

@ hasnain:

if this is different fone not t156 all then sure i will send it all to hacker..

plz dont create war here ok..

StRaNgE PeRsOn · 11-14-2009, 16:55

Contact hack on ICQ he can solve your problem

StRaNgE PeRsOn · 11-14-2009, 17:08

i can't understand in this whole thread how your phones are going dead?
I haven't faced such problem neither in old one nor in new one

Br

**.:hack3r2k:.** · 11-14-2009, 17:08

Phones will get dead only if unlock process get stopped somehow. Even so phones should power on using *+#+pwr on ! Be sure you remove battery properly. Also be sure phone it's ok before unlock mean it dont have 0044 imeis etc.

Br

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
T156 new security dead after unlock	rizoo	FuriousGold	28	03-23-2010 20:09
How to unlock zong ZTE 136G And Ufone Huawei T156 new security	gsm_	Infinity-Box	2	03-05-2010 13:14
huawei t156 new security ayz unlock done with out open	naveedbutt	FuriousGold	2	01-12-2010 09:57
FuriousGold added NEW HUAWEI T156 NEW SECURITY - FREE UPDATE - V1.0.0.3123	FuriouS TeaM	Service Products News & Updates	0	11-12-2009 20:04
t303 new security dead after unlock	LABOSSEF	Infinity-Box	8	03-24-2009 21:41

11-14-2009, 15:29	#33 (permalink)
msashami No Life Poster Join Date: Sep 2005 Location: -=HORIZON=-MobiSoft Rahwali GR Age: 38 Posts: 1,344 Member: 181213 Status: Offline Sonork: 100.1586186 Thanks Meter: 201	I have also unlocked ufone new security. after unlock dead. i think that bin file can repair it but how to use that???

11-14-2009, 16:03	#36 (permalink)
Miftahudin No Life Poster Join Date: Feb 2005 Location: Aqua Project Age: 47 Posts: 2,393 Member: 115242 Status: Offline Sonork: 100.1581364 Thanks Meter: 1,638	More then 50 pcs successfully unlocked without any problem ……………. Br.

11-14-2009, 16:55	#43 (permalink)
StRaNgE PeRsOn No Life Poster Join Date: Nov 2006 Location: PAKISTAN Posts: 3,169 Member: 391445 Status: Offline Sonork: 100.1583575 Thanks Meter: 392	Contact hack on ICQ he can solve your problem

11-14-2009, 17:08	#44 (permalink)
StRaNgE PeRsOn No Life Poster Join Date: Nov 2006 Location: PAKISTAN Posts: 3,169 Member: 391445 Status: Offline Sonork: 100.1583575 Thanks Meter: 392	i can't understand in this whole thread how your phones are going dead? I haven't faced such problem neither in old one nor in new one Br

11-14-2009, 17:08	#45 (permalink)
.:hack3r2k:. Product Manager Join Date: Aug 2002 Location: FuriouSTeaM Posts: 53,982 Member: 15022 Status: Offline Sonork: 100.53452 Thanks Meter: 61,572	Phones will get dead only if unlock process get stopped somehow. Even so phones should power on using *+#+pwr on ! Be sure you remove battery properly. Also be sure phone it's ok before unlock mean it dont have 0044 imeis etc. Br