Jazz Digit4G dead by Fix 0 firmware

[DUNIYA JAMAL]

Hello FG Team,

I Unlocked jazz digit 4G by fg gold but after hang on logo. I decided to flash with fix 0 firmware but after flash mobile has been dead.
Now what should I do ?


Best Regards,

Using library Brom_DLL_v7.1813.3
Engine version 1.0.0.5405
Searching phone in normal mode;
[connect the phone powered off with "0" key pressed to the usb cable]
Phone detected (MediaTek USB Port_V1632 (COM4)) (Driver version: 3.0.1504.0)
Preparing to start flash mode;
Preparing to open COM4
Device hw code: 0699
Device hw sub code: 8A00
Device hw version: CB00
Device sw version: 0002
Device secure boot: True
Device serial link authorization: False
Device download agent authorization: True
Disabling watchdog timer;
Done;
Exploited;
Sec code uploaded;
Executed;
Vodka time;
Ready to party;
Connecting;
Downloading DA;
Initializing;
Rid: 7829f0014b2243588048f484646753d0
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6739 [CB00, 02, 6739, 00]
BB ID: NThBRTREMUE4RTJBQzZCRjNENUNCRENCRTIyMzIwRDI=
HW_STORAGE_EMMC: 0x484A0190 0x61324734 0x12170211 0x59A48CDC  [SIZE=0xE9C00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0xA3000000 SIZE: 0x424FBE00



Searching data;
File not found;
Calculating;

Performing extended unlock;
Done;
Checking server support license;
Unlock completed; Don't forget that second place is the first looser ;-)

Phone unlocked; Remove battery and cable;

Time needed - 00:01:46


Preparing to write BOOT;
Writing BOOT;
Preparing to write BOOT_PARA;
Writing BOOT_PARA;
Preparing to write MCUPMFW;
Writing MCUPMFW;
Preparing to write MD1DSP;
Writing MD1DSP;
Preparing to write MD1IMG;
Writing MD1IMG;
Preparing to write NVCFG;
Writing NVCFG;
Preparing to write NVDATA;
Writing NVDATA;
Preparing to write NVRAM;
Writing NVRAM;
Preparing to write PARA;
Writing PARA;
Preparing to write PROINFO;
Writing PROINFO;
Preparing to write RECOVERY;
Writing RECOVERY;
Preparing to write SYSTEM;
Writing SYSTEM;
Blu error;
Success;

Time needed - 00:04:40

Using library Brom_DLL_v7.1813.3
Engine version 1.0.0.5405
Searching phone in normal mode;
[connect the phone powered off with "0" key pressed to the usb cable]
Phone detected (MediaTek USB Port_V1632 (COM4)) (Driver version: 3.0.1504.0)
Preparing to start flash mode;
Preparing to open COM4
Device hw code: 0699
Device hw sub code: 8A00
Device hw version: CB00
Device sw version: 0002
Device secure boot: True
Device serial link authorization: False
Device download agent authorization: True
Disabling watchdog timer;
Done;
Exploited;
Sec code uploaded;
Executed;
Vodka time;
Ready to party;
Connecting;
Downloading DA;
Initializing;
Rid: 7829f0014b2243588048f484646753d0
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6739 [CB00, 02, 6739, 00]
BB ID: NThBRTREMUE4RTJBQzZCRjNENUNCRENCRTIyMzIwRDI=
HW_STORAGE_EMMC: 0x484A0190 0x61324734 0x12170211 0x59A48CDC  [SIZE=0xE9C00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0xBB000000 SIZE: 0x2CFFBE00


Preparing to write BOOT;
Writing BOOT;
Preparing to write BOOT_PARA;
Writing BOOT_PARA;
Preparing to write MCUPMFW;
Writing MCUPMFW;
Preparing to write MD1DSP;
Writing MD1DSP;
Preparing to write MD1IMG;
Writing MD1IMG;
Preparing to write NVCFG;
Writing NVCFG;
Preparing to write NVDATA;
Writing NVDATA;
Preparing to write NVRAM;
Writing NVRAM;
Preparing to write PARA;
Writing PARA;
Preparing to write PROINFO;
Writing PROINFO;
Preparing to write RECOVERY;
Writing RECOVERY;
Preparing to write SYSTEM;
Writing SYSTEM;
Blu error;
Success;

Time needed - 00:04:55

[Unlockinfo]

you want backup first,if hang logo phone then factory reset phone and now you can try with another firmware download file from support site.



Best Regard
Unlockinfo

[Unlockinfo]

you want backup first,if hang logo phone then factory reset phone and now you can try with another firmware download file from support site.



Best Regard
Unlockinfo

[alijaanfsd]

Plz Uploud This File And Shair Link

[DUNIYA JAMAL]

Originally Posted by Unlockinfo

you want backup first,if hang logo phone then factory reset phone and now you can try with another firmware download file from support site.



Best Regard
Unlockinfo

Unfortunately, I did not back up

best regards

[Unlockinfo]

Originally Posted by DUNIYA JAMAL

Unfortunately, I did not back up

best regards

you can try with another firmware download from support site