OTZ Flasher dump write

[demoxx]

Hi, why I can't write back the memory with otz flasher? simply does not happening anything when i try to load the dump.


it's a mobiwire pictor firmware.


thanks for help

[.:hack3r2k:.]

You have some firmwares on the support. Dumps cannot be written.


Br

[demoxx]

Tried both, also Tele2fon firmware, but still dead Tried to unlock, but stuck waiting for meta mode.
The customer bring it to change the language on it, but after flashing it does not power on anymore.
I know it's a 2 cents worth phone and just a waste of time, but the problem is that I have to give something back to the customer.

Using library Brom_DLL_v5.1316.1
EMI Settings Loaded;
Searching phone;
(for some models keep SPACE or * (STAR) key pressed before inserting the cable)
Phone detected (MediaTek USB Port (COM66))
Preparing to start flash mode; 
Connecting;
Downloading DA;
Initializing;
Requesting baudrate change;
Done;
DEVICE INFO:
BB CHIP: MT6260_S0000 [CB00, 00, 6260, 05]
MEMORY: [GigaDevice] GD25LQ128 [C8:60:18] [SIZE=0x01000000]
FAT INFO: 0x00910000 SIZE: 0x006F0000
IMEI1 [OTP]: N/A
IMEI2 [OTP]: N/A


Loading the file ...
Cfg done ...
File contents to write:
[70006600-700087EB] ARM_BL
[10004400-1000C8A7] ARM_EXT_BL
[10010000-1028DE93] PRIMARY_MAUI
[1028E294-106D8387] VIVA
Downloading bootloader...
Done;
Pre-formatting code area..
Done;
Downloading images...
Done;
Done;
Done;
Done;
Formatting file system now...
Done;

Time needed - 00:01:09

---------------------------

Using library Brom_DLL_v5.1316.1
Searching phone;
(for some models keep SPACE or * (STAR) key pressed before inserting the cable)
Phone detected (MediaTek USB Port (COM66))
Preparing to start meta mode; 
ERROR: Timeout waiting !

Time needed - 00:00:45

I think it's because there is no IMEI.

So is there any way to make it power on again?

Br, Toni.

[.:hack3r2k:.]

Is normal not to see any imeis there as it doesn't have OTP ones. Flashes we have are the only ones we have on support for it. Also language change doesn't require any meta.


Unfortunately if it doesn't power on with the flashes we have there isn't much we can do. Are the only ones available ;(


From the log all looks fine. Seems the firmware not compatible with that phones hardware


Br;0

[demoxx]

Can't you extract the dump from above? I would try to write binary by chinese miracle.

THank you

[.:hack3r2k:.]

Originally Posted by demoxx

Can't you extract the dump from above? I would try to write binary by chinese miracle.

THank you

I can extract but im very sure it wont work. Contact me over telegram channel pls


Br