Originally Posted by gsm_eprom (Post 13831134)

Wiko View2

network locked

y80

model:w-v720

need solution to unlock network



best regards

Originally Posted by gsm_eprom (Post 13831341)

Processor Unisoc SC9863A, Octa-Core 1.6GHz

Originally Posted by azo_ja (Post 13878505)

Searching phone;
For an successful connection do the following:
1. Connect the phone powered off with the battery inside to the usb cable
Phone detected (@oem76.inf,%dvcdsc%;SCI USB2Serial)
Preparing to sync;
Port opened [COM68];
Entering diagnostic mode;
Done;
Chip type: 0000:0000

Platform Version: MOCORTM_18B_W19.10.2_P12_Debug
Project Version: sharkl3_pub
BASE Version: FM_BASE_18B_W19.10.2_P12
HW Version: sc9863A_modem
06-11-2019 13:28:40
Build number: 5024D_BHBA_2SIM_V1.4_20190815_SIMLOCK
PHONE INFO:
BT ADDR:
SW IMEI[0]: 355131-10-222XXX-X
SW IMEI[1]: 355131-10-222XXX-X
SW IMEI[2]: 867400-02-031XXX-X
SW IMEI[3]: 867400-02-031XXX-X

SIMLOCK FLAG: ON

SIM_LOCK TYPE: 4

IMEI: 355131-10-222XXX-X UNLOCK CODE: 00000000


Code reading finished; Remove battery and cable;

Log file saved to: LOG_30_10_2019_12_28_30.txt


Time needed - 00:00:20


CODE IS NOT VALID , any idea pls?

Originally Posted by kalser (Post 13882262)

How wrong , bay 1 credit and not unlock ? 5024D

Searching phone;
For an successful connection do the following:
1. Power on the phone and power it off
2. Keep pressed firmly volume UP key
3. Insert the usb cable inside the phone while keeping pressed volume UP
Phone detected (@oem128.inf,%dvcdsc%;SCI USB2Serial)
Preparing to sync;
Port opened [COM41];
Mobile type: SPRD3
Connected;
Starting;
FDL sent;
Syncing;
Loader version: (c)2019, FuriouSTeaM
Starting FDL2;
FDL2 sent;
Starting auth;
memory_type: IF_TYPE_MMC
dev_no: 0
part_type: PART_TYPE_UNKNOWN
vendor: Man 00008f Snr e01a45c9
product: UY5CS0
revision: 1.0
memory_size: 29,3 GB
HW IMEI : 000000-00-000000-0
PHONE INFO: NONE
BT ADDR: NONE
SW IMEI[0]: 355131-10-222858-6
SW IMEI[1]: 355131-10-222859-4
SW IMEI[2]: 867400-02-031663-8
SW IMEI[3]: 867400-02-031664-6

SIMLOCK FLAG: ON
Reading NV;


NV saved to : NV_000000-00-000000-0_355131-10-222858-6_98550000_2_11_2019_16_58_40.spd
Gathering security data;
Security check result: 0
Connecting to server;
Authorisation process started;
Done;

Requesting data from server ! Wait please ...

You are not authorized for this operation !
ERROR: Simlock set error !

Log file saved to: LOG_2_11_2019_16_58_55.txt


Time needed - 00:02:12

Originally Posted by .:hack3r2k:. (Post 13882369)

Hi,


You must go https://www.furiousgold.com/en/produ...tipurpose-logs and actually buy it using existing credits. Whats your box id !?


Br;)

Originally Posted by kalser (Post 13882385)

my box id is



86A5C1D0

Originally Posted by .:hack3r2k:. (Post 13882386)

Done . Check now. :D . To power on phone from boot mode keep pressed long vol down + power


Br;)

Originally Posted by azo_ja (Post 13895321)

Hi!
Please add this model for unlock
Tnx..

ZTE A7 2019
BH Telecom
Detected: SCI USB2Serial (COM68)
Platform Version MOCORTM_18B_W19.10.2_ZLA_P5_DebugProject Version sharkl3_pubBASE Version FM_BASE_18B_W19.10.2_ZLA_P5HW Version sc9863A_modem05-06-2019 184959
Build number: GEN_MY_P963F02V1.0.0B03
IMEI 1: 860982040776807
IMEI 2: 860982040791806
Serial number: 722477103818
BT: 4859A46FAD4B
WIFI: 6014669182AE
Reading simlock backup, wait....
Saved to: C:\Users\gsm_a\OneDrive\Dokumenti\spreadtrum_modul e\backup\spd_simlock_nvram_backup\860982040776807_ 722477103818_diag_simlock_nvram_backup.tar
UID: 5432375234395F365F32335F31340A0A000000000000000000 00000000000000
[4]Unsupported Simlock Type
Done.