PBB NEC 3G Nexus ERROR IN UNLOCK PROCEDURE (AUTO-RELOCK) - GSM-Forum

Eerchant · 05-19-2005, 11:26

Phone (C616V) UNLOCKED ok but when u insert ORIGINAL SIM, it AUTO LOCK on SP LOCK (*#3210# and show SP LOCK ON).....when use CRAZZY cracked all was OK, IMEI IS OK, and PHONE NOT RELOCKING ANYMORE with ORIG SIM, please ZULEA repair some BUG in your SW and also will be great to write some MMS/WAP profile changer/creator (cause i watch some files u use...) to be able to SET WAP/MMS on NEC 3G cause, nobody and no other tool can do this....

Regards Eerchant

***acyl2000*** · 05-19-2005, 11:59

yes...i had this problem too, & i try unlock again & again finally is ok now...

Eerchant · 05-19-2005, 16:42

Quote:

Originally Posted by acyl2000

yes...i had this problem too, & i try unlock again & again finally is ok now...

It relock only with ORIGINAL sim, with other (if you NOT insert original SIM) works great....and i try unlock more time and still relocking...so there must be some error in procedure that with original sim "run" in phone relock procedure, witch not happend if you unlock phone by crazzy unlocker...

Regards...

zulea · 05-19-2005, 19:11

Hi,

To disable AutoLock on NEC e616, just change in file UK0106_e616.xml

this line:

<Item Name="Service Provider:Autolock Enabled" Desc="" Control="Check" Size="1" FactoryValue="1" RangeMin="0" RangeMax="1" Effect="3" Position="0"/>

with this line:
<Item Name="Service Provider:Autolock Enabled" Desc="" Control="Check" Size="1" FactoryValue="0" RangeMin="0" RangeMax="1" Effect="3" Position="0"/>

In fact, FactoryValue must be changed to 0. Same apply to e313 and e338.

Or just overwrite attached files from this archive in their places on Nec 3G Nexus software on your PC. In this, all AutoLock are disabled for all models.

Sorry for troubles, it was my mistake, I just forget about this.

Best regards,
Zulea

distefano · 05-19-2005, 23:53

tnx so much , but how about wap,gprs,mms possibilities to configure?Can You add function to reset them,unlock them?

WBR
diStefano

zulea · 05-20-2005, 01:50

Quote:

Originally Posted by distefano

tnx so much , but how about wap,gprs,mms possibilities to configure?Can You add function to reset them,unlock them?

WBR
diStefano

Just "change" the IMEI of phone to the same number, and all of this will be reset and unlocked. For configure, sorry but you have to enter manualy from the menus or use any SMS send to phone with right configuration.

Leo140 · 06-06-2005, 21:20

does anybody show me the correct pinout com cable for nec 616

hakima · 06-07-2005, 05:45

Quote:

Originally Posted by Leo140

does anybody show me the correct pinout com cable for nec 616

The same as pinout of GX30 serial cable with external power

Best regards

fajar_kader · 06-22-2005, 17:23

ZULEA CAN U INTRUDUCE FLASHING OPTIONS TO "NEXUS" FOR E338? or repair SOUND problems?

after89 · 06-24-2005, 17:49

I unlocked several necs... all i put sim card of provider which has both 2g nd 3g network... phone will go only on 2 G netw when try to go to 3G netw with same sim.. it asks for usim .. any solution //?

e-person · 06-24-2005, 19:11

Quote:

Originally Posted by after89

I unlocked several necs... all i put sim card of provider which has both 2g nd 3g network... phone will go only on 2 G netw when try to go to 3G netw with same sim.. it asks for usim .. any solution //?

Every unlockers know that NEC 3G phones work in 3G with 128k SIMs only.

after89 · 06-24-2005, 21:09

thanks for prompt confirmation

CLIFFORD25502 · 06-25-2005, 08:07

i have strange problem phone seems be unlocked but i even cant call from it. it say no 2g network. soft cant reset phone does anybody have same problem or know hove 2 fix it. phone is 338. by the way hove 2 check ver on it?

fonestyle · 09-06-2005, 17:57

Quote:

Originally Posted by zulea

Hi,

To disable AutoLock on NEC e616, just change in file UK0106_e616.xml

this line:

<Item Name="Service Provider:Autolock Enabled" Desc="" Control="Check" Size="1" FactoryValue="1" RangeMin="0" RangeMax="1" Effect="3" Position="0"/>

with this line:
<Item Name="Service Provider:Autolock Enabled" Desc="" Control="Check" Size="1" FactoryValue="0" RangeMin="0" RangeMax="1" Effect="3" Position="0"/>

In fact, FactoryValue must be changed to 0. Same apply to e313 and e338.

Or just overwrite attached files from this archive in their places on Nec 3G Nexus software on your PC. In this, all AutoLock are disabled for all models.

Sorry for troubles, it was my mistake, I just forget about this.

Best regards,
Zulea

Autolock After Unlocking Using Nexus On Nec C616v

--------------------------------------------------------------------------------

I have unlocked a NEC C616V (SV22) and NEC 338 (SV03) using NEXUS V4.0 and the SP lock is still on. I was told that I have to disable autolock on some of the files in Nexus by overwriting them with some attached files I found on this forum so that all autolocks will be removed for all models.

I was advised to overwrite (replace) the attached files in thier places in Nexus. The problem I have is that the application extension files are dll files where as the attached files are xml files so I am unable to overwrite or even find these particular files.
How can I do this so that I can unlock NEC phones??

Or alternativley, can someone suggest where I can find an up to date version of Nexus that doesn't autolock the phone after unlocking. Tried on this forum but all links seem to be dead.

Thanks in advance.

fonestyle
View Public Profile
Send a private message to fonestyle
Send email to fonestyle
Find More Posts by fonestyle
Add fonestyle to Your Buddy List

Today, 06:20

chuckzster · 09-28-2005, 06:09

thanx a lot............................................... ..

05-19-2005, 23:53	#5 (permalink)
distefano Freak Poster Join Date: May 2003 Location: POLAND Age: 48 Posts: 476 Member: 29669 Status: Offline Thanks Meter: 1	great tnx so much , but how about wap,gprs,mms possibilities to configure?Can You add function to reset them,unlock them? WBR diStefano

06-24-2005, 17:49	#10 (permalink)
after89 Freak Poster Join Date: Feb 2004 Age: 51 Posts: 302 Member: 54486 Status: Offline Thanks Meter: 5	unlock but no 3G I unlocked several necs... all i put sim card of provider which has both 2g nd 3g network... phone will go only on 2 G netw when try to go to 3G netw with same sim.. it asks for usim .. any solution //?

06-24-2005, 21:09	#12 (permalink)
after89 Freak Poster Join Date: Feb 2004 Age: 51 Posts: 302 Member: 54486 Status: Offline Thanks Meter: 5	nec thanks for prompt confirmation

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Now PBB Nec 3G Nexus have IMEI change ;)	zulea	Phoenix Black Box	58	08-30-2005 07:25
PBB Nec 3G Nexus CRACKED!	r3tired	NEC	37	05-06-2005 22:55
PBB Nec 3G Nexus v4.0 CRACKED -DL- here!	r3tired	Programs Keys & H/W finger prints	134	05-06-2005 22:15
PBB Nec 3G Nexus v3.0 released	zulea	Phoenix Black Box	47	04-27-2005 16:37
PBB Nec 3G Nexus v4.0 released	handy-tuning	Phoenix Black Box	0	04-22-2005 14:19

05-19-2005, 11:59	#2 (permalink)
*acyl2000* Super Moderator Join Date: Aug 2000 Location: Malaysia Posts: 2,809 Member: 1922 Status: Offline Sonork: 100.64645 Thanks Meter: 692	yes...i had this problem too, & i try unlock again & again finally is ok now...

06-06-2005, 21:20	#7 (permalink)
Leo140 No Life Poster Join Date: Nov 2003 Age: 46 Posts: 823 Member: 43076 Status: Offline Thanks Meter: 10	does anybody show me the correct pinout com cable for nec 616

06-22-2005, 17:23	#9 (permalink)
fajar_kader Freak Poster Join Date: Mar 2004 Age: 45 Posts: 147 Member: 59382 Status: Offline Thanks Meter: 2	ZULEA CAN U INTRUDUCE FLASHING OPTIONS TO "NEXUS" FOR E338? or repair SOUND problems?

06-25-2005, 08:07	#13 (permalink)
CLIFFORD25502 No Life Poster Join Date: Aug 2004 Age: 47 Posts: 2,301 Member: 76522 Status: Offline Thanks Meter: 30	i have strange problem phone seems be unlocked but i even cant call from it. it say no 2g network. soft cant reset phone does anybody have same problem or know hove 2 fix it. phone is 338. by the way hove 2 check ver on it?

09-28-2005, 06:09	#15 (permalink)
chuckzster No Life Poster Join Date: Apr 2005 Location: TaTmode(cebu) Age: 39 Posts: 572 Member: 139924 Status: Offline Thanks Meter: 6	thanx a lot............................................... ..