<<<__N73 cable to use with the 29pcs chinese miracle cable?__>>> - GSM-Forum

keaelite · 11-04-2007, 06:13

what cable should i use?because cable pinout is different from the pin out shown in pin out it says that must use CECT S560 but its impossible to insert that cable because phone port is too small similar like cable CECT N1000.

phone is chinese nokia model:N73 type:RH-73

br
keaelite

**InfinitySupport** · 11-04-2007, 11:25

Due to a lot of different models with the same name but absolutely different hardware,
bottom connectors and different pinouts we recommend you to include the next info:
1. detailed description of model
2. phone CPU chip name
3. phone PCB photo (Rx/Tx/Gnd test-points may exist on phone PCB)
4. attach phone photo
5. attach phone bottom connector photo
6. include information about Gnd and Charge pins on phone bottom connector

After you have this information prepared, check the next detailed description how to get pinout for your model:
use "Cable Selector": http://forum.gsmhosting.com/vbb/showthread.php?t=398297
if not helps, please read: C:\Program Files\InfinityBox\pinout\ChineseMiracle\
if not helps, please read: http:///vbb/showpo...36&postcount=7
if not helps, please read: http:///vbb/showthread.php?t=433447

11-04-2007, 06:13	#1 (permalink)
keaelite No Life Poster Join Date: Jun 2006 Location: sn,fdo,lu philippines Posts: 3,346 Member: 288470 Status: Offline Sonork: 100.1605122 Thanks Meter: 664	<<<__N73 cable to use with the 29pcs chinese miracle cable?__>>> what cable should i use?because cable pinout is different from the pin out shown in pin out it says that must use CECT S560 but its impossible to insert that cable because phone port is too small similar like cable CECT N1000. phone is chinese nokia model:N73 type:RH-73 br keaelite

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
combined flasher cable with m-bus to use with the same connectors	mobidoc	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	09-15-2009 02:22
pin outs for the cable to use with atr 5.0	turon	Old Ericsson Phones & Sony Phones	2	08-09-2003 05:52
Is there a Mp3 program for the 5510 to use with an F/M bus cable	sifasli	Nokia Multimedia	5	05-27-2003 16:31
What software and cable to use with A400?	GSM Sales	VLSI, Conexant, Skyworks and Old Models	2	04-23-2002 17:48
cable to use with workshop 2.2 and T28s	flap_v	Old Ericsson Phones & Sony Phones	3	11-23-2000 22:35

11-04-2007, 11:25	#2 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Due to a lot of different models with the same name but absolutely different hardware, bottom connectors and different pinouts we recommend you to include the next info: 1. detailed description of model 2. phone CPU chip name 3. phone PCB photo (Rx/Tx/Gnd test-points may exist on phone PCB) 4. attach phone photo 5. attach phone bottom connector photo 6. include information about Gnd and Charge pins on phone bottom connector After you have this information prepared, check the next detailed description how to get pinout for your model: use "Cable Selector": http://forum.gsmhosting.com/vbb/showthread.php?t=398297 if not helps, please read: C:\Program Files\InfinityBox\pinout\ChineseMiracle\ if not helps, please read: http:///vbb/showpo...36&postcount=7 if not helps, please read: http:///vbb/showthread.php?t=433447